Notes on the Network

Last updated

Notes on the Network is a publication of the American Telephone & Telegraph Company (AT&T) that outlines the state, technology, and operating principles of the public switched telephone network in the United States and Canada, and the other member regions of the North American Numbering Plan.

Contents

The origins of publication date back to the 1945 communications about Nationwide Operator Toll Dialing disseminated by AT&T to the Bell System companies and to the independent telephone operators via the Dial interexchange Committee of the United States Independent Telephone Association (USITA). [1] In 1955, AT&T published the first extensive edition under the title Notes on Nationwide Dialing, [2] which was updated the following year (1956) under the title Notes on Distance Dialing. [3] Additional editions were issued in 1961, 1968, and 1975. The first use of the title Notes on the Network was for the 1980 edition. [4]

After the breakup of AT&T and the Bell System, the document was maintained and published by Bell Communications Research (BELLCORE) in 1983, 1986, 1990, 1994, and 1997. The 1983 and 1986 versions were known as Notes on the BOC Intra-LATA Networks, while the 1990 and 1994 editions had the title BOC Notes on the LEC Networks. The 1997 issue was entitled Bellcore Notes on the Networks.

Through divestiture in 1999, Bellcore was renamed Telcordia. A new edition of the Notes (Issue 4) was published in 2000 as Telcordia Notes on the Networks, which is the most recent version, as of 2017. Between 1999 and 2002, Telcordia also published a series of twenty-one topic-specific modules, available individually or as a set, known as the Telcordia Notes On... Technology Series, which have also not been updated since.

In 1983, shortly before the 1984 divestiture of AT&T, Telecom-Canada published Digital Network Notes, an update and companion volume to the 1980 AT&T Notes on the Network, with more specific information for the Canadian territory. It provided a detailed analysis of the history of analog and digital telecommunications, and offered references for the design, implementation, and operation of digital networks. [5]

See also

Related Research Articles

The Intelligent Network (IN) is the standard network architecture specified in the ITU-T Q.1200 series recommendations. It is intended for fixed as well as mobile telecom networks. It allows operators to differentiate themselves by providing value-added services in addition to the standard telecom services such as PSTN, ISDN on fixed networks, and GSM services on mobile phones or other mobile devices.

Wide Area Telephone Service (WATS) was a flat-rate long-distance service offering for customer dial-type telecommunications in some of the countries that adhere to the North American Numbering Plan. The service was between a given customer phone and stations within specified geographic rate areas, employing a single telephone line between the customer location and the serving central office. Each access line could be arranged for outward (OUT-WATS) or inward (IN-WATS) service, or both.

Caller identification is a telephone service, available in analog and digital telephone systems, including voice over IP (VoIP), that transmits a caller's telephone number to the called party's telephone equipment when the call is being set up. The caller ID service may include the transmission of a name associated with the calling telephone number, in a service called Calling Name Presentation (CNAM). The service was first defined in 1993 in International Telecommunication Union – Telecommunication Standardization Sector (ITU-T) Recommendation Q.731.3.

<span class="mw-page-title-main">North American Numbering Plan</span> Integrated telephone numbering plan of twenty North American countries

The North American Numbering Plan (NANP) is a telephone numbering plan for twenty-five regions in twenty countries, primarily in North America and the Caribbean. This group is historically known as World Zone 1 and has the telephone country code 1. Some North American countries, most notably Mexico, do not participate in the NANP.

A toll-free telephone number or freephone number is a telephone number that is billed for all arriving calls. For the calling party, a call to a toll-free number from a landline is free of charge. A toll-free number is identified by a dialing prefix similar to an area code. The specific service access varies by country.

A naked DSL, also known as standalone or dry loop DSL, is a digital subscriber line (DSL) without a PSTN service — or the associated dial tone. In other words, only a standalone DSL Internet service is provided on the local loop.

<span class="mw-page-title-main">Breakup of the Bell System</span> 1982 U.S. government action to end AT&T Corps monopoly over telephone services

The breakup of the Bell System was mandated on January 8, 1982, by a consent decree providing that AT&T Corporation would, as had been initially proposed by AT&T, relinquish control of the Bell Operating Companies, which had provided local telephone service in the United States. This effectively took the monopoly that was the Bell System and split it into entirely separate companies that would continue to provide telephone service. AT&T would continue to be a provider of long-distance service, while the now-independent Regional Bell Operating Companies (RBOCs), nicknamed the "Baby Bells", would provide local service, and would no longer be directly supplied with equipment from AT&T subsidiary Western Electric.

Analog Display Services Interface (ADSI) is a telephony technology that is used in plain old telephone service (POTS) or computer-based private branch exchange (PBX) telephone service. It works in conjunction with a screen-based telephone ("screenphone") or other compatible customer-premises equipment (CPE) to provide the user with softkey access to telephone company or internal PBX custom calling features. It is an analog service because it uses analog frequency-shift keying (FSK) technology to interact with an LCD screen via short, low-baud rate, downloads to refresh and re-program softkeys in real-time.

In telephony, a message-waiting indicator (MWI) is a Telcordia Technologies term for an FSK-based telephone calling feature that illuminates an LED on selected telephones to notify a telephone user of waiting voicemail messages on most North American public telephone networks and PBXs.

An intercept message is a telephone recording informing the caller that the call cannot be completed, for any of a number of reasons ranging from local congestion, to disconnection of the destination phone, number dial errors or network trouble along the route.

Telecom Valley was an area located in Sonoma County, California specifically the Redwood Business Park of Petaluma, California.

<span class="mw-page-title-main">Telephone number</span> Sequence of digits assigned to a telephone subscription

A telephone number is a sequence of digits assigned to a landline telephone subscriber station connected to a telephone line or to a wireless electronic telephony device, such as a radio telephone or a mobile telephone, or to other devices for data transmission via the public switched telephone network (PSTN) or other public and private networks.

The original North American area codes were established by the American Telephone and Telegraph Company (AT&T) in 1947, following the demonstration of regional Operator Toll Dialing during the World War II period. The program had the goal of speeding the connecting times for long-distance calling by eliminating intermediary telephone operators. Expanding this technology for national use required a comprehensive and universal, continent-wide telephone numbering plan.

<span class="mw-page-title-main">PSTN network topology</span>

PSTN network topology is the switching network topology of a telephone network connected to the public switched telephone network (PSTN).

<span class="mw-page-title-main">Bell System Practices</span>

The Bell System Practices (BSPs) is a compilation of technical publications which describes the best methods of engineering, constructing, installing, and maintaining the telephone plant of the Bell System under direction of AT&T and Bell Telephone Laboratories. Covering everything from accounting and human resources procedures through complete technical descriptions of every product serviced by the Bell System, it includes a level of detail specific to the best way to wrap a wire around a screw, for example.

In conventional landline telephony, a non-dialable toll point or toll station was a lone station or line serving a rural subscriber many miles from the nearest central office. As it had no home telephone exchange and therefore no local calling area, no customer could dial its number; all connections to it had to be obtained manually by the long distance operator.

Operator Toll Dialing was a telephone call routing and toll-switching system for the Bell System and the independent telephone companies in the United States and Canada that was developed in the 1940s. It automated the switching and billing of long-distance calls. The concept and technology evolved from the General Toll Switching Plan of 1929, and gained technical merits by the cutover of a new type of crossbar switching system in Philadelphia to commercial service in August 1943. This was the first system of its kind for automated forwarding of calls between toll switching centers, but it served customers only for regional toll traffic. It established initial experience with automatic toll switching for the design of a nationwide effort that was sometimes referred to as Nationwide Operator Toll Dialing.

The General Toll Switching Plan was a systematic nationwide effort by the American Telephone and Telegraph Company (AT&T) of organizing the telephone toll circuits and cable routes of the nation, and of streamlining the operating principles and technical infrastructure for connecting long-distance telephone calls in North America. This involved the design of a hierarchical system of toll-switching centers, a process that had found substantial maturity by 1929. The switching plan was principally operated by the Long Lines division of the Bell System in cooperation with independent telephone companies under the decree of the Kingsbury Commitment, reached with the United States government in 1913. The General Toll Switching Plan was a system manually operated by long-distance telephone operators. It was the forerunner of an automated system called Nationwide Operator Toll Dialing that was begun in 1943, which eventually led to Direct Distance Dialing (DDD) within the framework of the North American Numbering Plan decades later.

References

  1. ↑ AT&T (1955). Notes on Nationwide Dialing – Foreword. These Notes have been prepared primarily to provide an outline of the technical requirements needed for participation in nationwide operator and customer toll dialing. They supersede the Notes on "Nationwide Operator Toll Dialing" which were furnished to the U.S.I.T.A. in 1945 and were published in Volume 130 (January-June 1946) of Telephony.
  2. ↑ "Bell System distributes Notes on Nationwide Dialing". Telephony. 148 (6): 55. 1955-02-05.
  3. ↑ "Announce Revised Notes on Nationwide Dialing". Telephony. 151 (19): 34. 1956-11-10.
  4. ↑ Lapsley, Phil (2013). Exploding the Phone. New York: Grove Press. p. 353. ISBN   978-0-8021-2061-8.
  5. ↑ "Reference Book Aids Telecom Network Designers". Computer Data. 9 (5): 15. May 1984.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.