Olation

Last updated

In inorganic chemistry, olation is the process by which metal ions form polymeric oxides in aqueous solution. [1] The phenomenon is important for understanding the relationship between metal aquo complexes and metal oxides, which are represented by many minerals. [2]

At low pH, many metal ions exist in aqueous solution as aquo complexes with the formula [M(H2O)6]3+. [3] As the pH increases, one O-H bond ionizes to give the hydroxide complex, the conjugate base of the parent hexaaqua complex:

[M(H2O)6]3+ ⇌ [M(H2O)5OH]2+ + H+

The hydroxo complex is poised to undergo olation, which is initiated by displacement of one water by the hydroxide ligand on another complex:

[M(H2O)6]3+ + [M(H2O)5OH]2+ ⇌ [M2(H2O)10(μ−OH]5+ + H2O

In this product, the hydroxide ligand bridges between the two metals, this bridge is denoted with the symbol μ. In the resulting 5+ ion, the remaining water and hydroxo ligands are highly acidic and the ionization and condensation processes can continue at still higher pHs.

The formation of the oxo-dimer is a process called oxolation: [4]

2 [LnMOH] ⇌ LnM−O−MLn + H2O, where L = ligand

Ultimately olation and oxolation lead to metal oxides:

2 [M(H2O)6]3+ → M2O3 + 9 H2O + 6 H+

Olation and oxolation are responsible for the formation of many natural and synthetic materials. Such materials are usually insoluble polymers, but some, the polyoxometallates, are discrete and molecular.

Olation and leather tanning

One application where olation is important is leather tanning using chromium(III) sulfate. This salt dissolves to give hexaaquachromium(III) cation, [Cr(H2O)6]3+ and sulfate anions. [Cr(H2O)6]3+ acts as an acid according to the reaction: [5]

[Cr(H2O)6]3+⇌ [Cr(H2O)5OH]2+ + H+; Keq ~ 10−4 M

Thus, higher pH favors [Cr(H2O)5OH]2+. This hydroxy complex can undergo olation: [6]

[Cr(H2O)6]3+ + [Cr(H2O)5OH]2+ → [(Cr(H2O)5)2(μ-OH)]5+ + H2O
2[Cr(H2O)5OH]2+ → [(Cr(H2O)4)2(μ-OH)2]4+ + 2 H2O

The "diol" (second reaction) is favored and is accelerated by heat and high pH. The balance of these two factors, temperature and pH of the solution, along with the concentration of chromium(III), influence the continued polymerization of [(Cr(H2O)4)2(μ-OH)2]4+. [7] The chromium(III) hydroxide is susceptible to oxolation:

[(Cr(H2O)4)2(μ-OH)2]4+ → [(Cr(H2O)4)2(μ-O)2]2+ + 2 H+

Products of oxolation are less susceptible to acidic cleavage than the hydroxy bridge. The resulting clusters are active in crosslinking the protein in tanning [8] , which essentially involves the cross-linking of the collagen subunits. The actual chemistry of [Cr(H2O)6]3+ is more complex in the tanning bath rather than in water due to the presence of a variety of ligands. Some ligands include the sulfate anion, the collagen's carboxyl groups, amine groups from the side chains of the amino acids, as well as "masking agents." Masking agents are carboxylic acids, such as acetic acid, used to suppress formation of polychromium(III) chains. Masking agents allow the tanner to further increase the pH to increase collagen's reactivity without inhibiting the penetration of the chromium(III) complexes. The crosslinks formed by the polychromium species are approximately 17 Å long. [9] [10]

Related Research Articles

<span class="mw-page-title-main">Hydroxide</span> Chemical compound

Hydroxide is a diatomic anion with chemical formula OH−. It consists of an oxygen and hydrogen atom held together by a single covalent bond, and carries a negative electric charge. It is an important but usually minor constituent of water. It functions as a base, a ligand, a nucleophile, and a catalyst. The hydroxide ion forms salts, some of which dissociate in aqueous solution, liberating solvated hydroxide ions. Sodium hydroxide is a multi-million-ton per annum commodity chemical. The corresponding electrically neutral compound HO• is the hydroxyl radical. The corresponding covalently bound group –OH of atoms is the hydroxy group. Both the hydroxide ion and hydroxy group are nucleophiles and can act as catalysts in organic chemistry.

<span class="mw-page-title-main">Iron(III)</span> The element iron in its +3 oxidation state

In chemistry, iron (III) refers to the element iron in its +3 oxidation state. In ionic compounds (salts), such an atom may occur as a separate cation (positive ion) denoted by Fe3+.

<span class="mw-page-title-main">Tanning</span> Process of treating animal skin to produce leather

Tanning, or hide tanning, is the process of treating skins and hides of animals to produce leather. A tannery is the place where the skins are processed.

In chemistry, an amphoteric compound is a molecule or ion that can react both as an acid and as a base. What exactly this can mean depends on which definitions of acids and bases are being used.

<span class="mw-page-title-main">Chromate and dichromate</span> Chromium(VI) anions

Chromate salts contain the chromate anion, CrO2−
4. Dichromate salts contain the dichromate anion, Cr
2O2−
7. They are oxyanions of chromium in the +6 oxidation state and are moderately strong oxidizing agents. In an aqueous solution, chromate and dichromate ions can be interconvertible.

<span class="mw-page-title-main">Aluminium chloride</span> Chemical compound

Aluminium chloride, also known as aluminium trichloride, is an inorganic compound with the formula AlCl3. It forms a hexahydrate with the formula [Al(H2O)6]Cl3, containing six water molecules of hydration. Both the anhydrous form and the hexahydrate are colourless crystals, but samples are often contaminated with iron(III) chloride, giving them a yellow colour.

<span class="mw-page-title-main">Chromium(III) chloride</span> Chemical compound

Chromium(III) chloride (also called chromic chloride) is an inorganic chemical compound with the chemical formula CrCl3. It forms several hydrates with the formula CrCl3·nH2O, among which are hydrates where n can be 5 (chromium(III) chloride pentahydrate CrCl3·5H2O) or 6 (chromium(III) chloride hexahydrate CrCl3·6H2O). The anhydrous compound with the formula CrCl3 are violet crystals, while the most common form of the chromium(III) chloride are the dark green crystals of hexahydrate, CrCl3·6H2O. Chromium chlorides find use as catalysts and as precursors to dyes for wool.

<span class="mw-page-title-main">Metal ammine complex</span>

In coordination chemistry, metal ammine complexes are metal complexes containing at least one ammonia ligand. "Ammine" is spelled this way for historical reasons; in contrast, alkyl or aryl bearing ligands are spelt with a single "m". Almost all metal ions bind ammonia as a ligand, but the most prevalent examples of ammine complexes are for Cr(III), Co(III), Ni(II), Cu(II) as well as several platinum group metals.

<span class="mw-page-title-main">Hexol</span> Chemical compound

In chemistry, hexol is a cation with formula {[Co(NH3)4(OH)2]3Co}6+ — a coordination complex consisting of four cobalt cations in oxidation state +3, twelve ammonia molecules NH
3, and six hydroxy anions HO−
, with a net charge of +6. The hydroxy groups act as bridges between the central cobalt atom and the other three, which carry the ammonia ligands.

<span class="mw-page-title-main">Uranyl</span> Oxycation of uranium

The uranyl ion is an oxycation of uranium in the oxidation state +6, with the chemical formula UO2+
2. It has a linear structure with short U–O bonds, indicative of the presence of multiple bonds between uranium and oxygen. Four or more ligands may be bound to the uranyl ion in an equatorial plane around the uranium atom. The uranyl ion forms many complexes, particularly with ligands that have oxygen donor atoms. Complexes of the uranyl ion are important in the extraction of uranium from its ores and in nuclear fuel reprocessing.

<span class="mw-page-title-main">1,4,7-Triazacyclononane</span> Chemical compound

1,4,7-Triazacyclononane, known as "TACN" which is pronounced "tack-en," is an aza-crown ether with the formula (C2H4NH)3. TACN is derived, formally speaking, from cyclononane by replacing three equidistant CH2 groups with NH groups. TACN is one of the oligomers derived from aziridine, C2H4NH. Other members of the series include piperazine, C4H8(NH)2, and the cyclic tetramer 1,4,7,10-tetraazacyclododecane.

<span class="mw-page-title-main">Chromium compounds</span> Chemical compounds containing chromium

Chromium compounds are compounds containing the element chromium (Cr). Chromium is a member of group 6 of the transition metals. The +3 and +6 states occur most commonly within chromium compounds, followed by +2; charges of +1, +4 and +5 for chromium are rare, but do nevertheless occasionally exist.

<span class="mw-page-title-main">Iron(III) sulfate</span> Chemical compound

Iron(III) sulfate (or ferric sulfate), is a family of inorganic compounds with the formula Fe2(SO4)3(H2O)n. A variety of hydrates are known, including the most commonly encountered form of "ferric sulfate". Solutions are used in dyeing as a mordant, and as a coagulant for industrial wastes. Solutions of ferric sulfate are also used in the processing of aluminum and steel.

<span class="mw-page-title-main">Chromium(III) sulfate</span> Chemical compound

Chromium(III) sulfate usually refers to the inorganic compounds with the formula Cr2(SO4)3.x(H2O), where x can range from 0 to 18. Additionally, ill-defined but commercially important "basic chromium sulfates" are known. These salts are usually either violet or green solids that are soluble in water. It is commonly used in tanning leather.

<span class="mw-page-title-main">Jones oxidation</span> Oxidation of alcohol

The Jones oxidation is an organic reaction for the oxidation of primary and secondary alcohols to carboxylic acids and ketones, respectively. It is named after its discoverer, Sir Ewart Jones. The reaction was an early method for the oxidation of alcohols. Its use has subsided because milder, more selective reagents have been developed, e.g. Collins reagent.

In chemistry, metal aquo complexes are coordination compounds containing metal ions with only water as a ligand. These complexes are the predominant species in aqueous solutions of many metal salts, such as metal nitrates, sulfates, and perchlorates. They have the general stoichiometry [M(H2O)n]z+. Their behavior underpins many aspects of environmental, biological, and industrial chemistry. This article focuses on complexes where water is the only ligand, but of course many complexes are known to consist of a mix of aquo and other ligands.

<span class="mw-page-title-main">Chromium(II) sulfate</span> Chemical compound

Chromium(II) sulfate is an inorganic compound with the chemical formula CrSO4. It often comes as hydrates CrSO4·nH2O. Several hydrated salts are known. The pentahydrate CrSO4·5H2O is a blue solid that dissolves readily in water. Solutions of chromium(II) are easily oxidized by air to Cr(III) species. Solutions of Cr(II) are used as specialized reducing agents of value in organic synthesis.

Chromium(III) hydroxide is a gelatinous green inorganic compound with the chemical formula Cr(OH)3. It is a polymer with an undefined structure and low solubility. It is amphoteric, dissolving in both strong alkalis and strong acids.

Aluminium triacetate, formally named aluminium acetate, is a chemical compound with composition Al(CH
3CO
2)
3. Under standard conditions it appears as a white, water-soluble solid that decomposes on heating at around 200 °C. The triacetate hydrolyses to a mixture of basic hydroxide / acetate salts, and multiple species co-exist in chemical equilibrium, particularly in aqueous solutions of the acetate ion; the name aluminium acetate is commonly used for this mixed system.

Karl Wieghardt is a German inorganic chemist and emeritus director of the Max Planck Institute for Chemical Energy Conversion in Mülheim. He was active in the preparation and detailed characterization of models for iron and manganese metalloenzymes, metal complexes of noninnocent ligands, and magnetic interactions in polynuclear metal complexes.

References

  1. ↑ Holleman, A. F.; Wiberg, E. "Inorganic Chemistry" Academic Press: San Diego, 2001. ISBN   0-12-352651-5.
  2. ↑ Ardon, Michael (1989). "Olation and Structure". Comments on Inorganic Chemistry. 8 (5): 221–232. doi:10.1080/02603598908035796.
  3. ↑ Helm, L. and Merbach, A. E., "Inorganic and Bioinorganic Solvent Exchange Mechanisms", Chem. Rev., 2005, 105, 1923-1959 doi : 10.1021/cr030726o
  4. ↑ Livage, J. (1998). "Sol–gel synthesis of heterogeneous catalysts from aqueous solutions". Catalysis Today. 41 (1–3): 3–19. doi:10.1016/s0920-5861(98)00034-0.
  5. ↑ Schlesinger, M.; Paunovic, M.; Modern Electroplating. Wiley-Interscience, 4th ed. 2000, 209-212.
  6. ↑ M. Thompson, R. E. Connick "Hydrolytic polymerization of chromium(III). 1. Two dimeric species" Inorg. Chem. 1981, 20, 2279-2285. doi : 10.1021/ic50221a068
  7. ↑ Schlesinger, M.; Paunovic, M.; Modern Electroplating. Wiley-Interscience, 4th ed. 2000, 209-212.
  8. ↑ Harlan, J.; Feairheller, S.; Adv. Exp. Med. Biol. 1977, 86A, 425.
  9. ↑ Gustavson, K.H.; The Chemistry of Tanning Processes. Academic Press Inc., New York, 1956.
  10. ↑ Covington, A.; Modern Tanning Chemistry, Chem. Soc. Rev. 1997, 26, 111-126. doi : 10.1039/CS9972600111
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.