Oswalds mill audio

Last updated
Oswalds Mill Audio (OMA)
IndustryAudio Electronics
Founded2007
FounderJonathan Weiss
Headquarters
Fleetwood, Pennsylvania
,
United States
ProductsLoudspeakers, amplifiers, turntables, audio accessories
Website https://oswaldsmillaudio.com/

Oswalds Mill Audio (OMA) is an American lifestyle company that designs and manufactures high end audio equipment for the home. OMA was founded in 2007, in New Tripoli, Pennsylvania by the filmmaker Jonathan Weiss. [1] In addition to horn loudspeakers, OMA also manufactures amplifiers, turntables, tonearms, and accessories. [2]

Contents

Overview

Oswalds Mill Audio is well known in the audio industry for their incorporation of vintage sound technologies in their product designs, such as the rare conical horn profile and field coil drivers. OMA is the only high end audio company manufacturing conical profile horn loudspeakers today. [3] OMA developed out of the infamous “Oswalds Mill Tube and Speaker Tasting”, a yearly event held in the 18th-century mill owned by Weiss in New Tripoli, PA. [4] The first OMA loudspeaker was commissioned by the photographer and filmmaker Anton Corbijn. OMA is directly inspired and influenced by the horn-loaded loudspeaker designs pioneered by RCA in the 1930s and 1940s. [1]

In 2014, OMA released the world’s first cast-iron speaker, the Ironic, with each speaker weighing 400lbs. [5] The Ironic is cast with 3-D printed molds and made from hypo eutectic high graphite grey iron. [6] OMA is known in the audio world for their unique approach to sound and design. Due to the use of conical horns, their speakers are much larger than those using curved horns or typical enclosed loudspeakers. [7] The largest speaker OMA manufactures is called the Imperia, a four-way conical horn system measuring 7′ (2.1 m) tall. [8]

See also

Related Research Articles

<span class="mw-page-title-main">Subwoofer</span> Loudspeaker for low-pitched audio frequencies

A subwoofer is a loudspeaker designed to reproduce low-pitched audio frequencies known as bass and sub-bass, lower in frequency than those which can be (optimally) generated by a woofer. The typical frequency range for a subwoofer is about 20–200 Hz for consumer products, below 100 Hz for professional live sound, and below 80 Hz in THX-certified systems. Subwoofers are never used alone, as they are intended to augment the low-frequency range of loudspeakers that cover the higher frequency bands. While the term "subwoofer" technically only refers to the speaker driver, in common parlance, the term often refers to a subwoofer driver mounted in a speaker enclosure (cabinet), often with a built-in amplifier.

<span class="mw-page-title-main">Loudspeaker</span> Converts an electrical audio signal into a corresponding sound

A loudspeaker is an electroacoustic transducer that converts an electrical audio signal into a corresponding sound. A speaker system, also often simply referred to as a "speaker" or "loudspeaker", comprises one or more such speaker drivers, an enclosure, and electrical connections possibly including a crossover network. The speaker driver can be viewed as a linear motor attached to a diaphragm which couples that motor's movement to motion of air, that is, sound. An audio signal, typically from a microphone, recording, or radio broadcast, is amplified electronically to a power level capable of driving that motor in order to reproduce the sound corresponding to the original unamplified electronic signal. This is thus the opposite function to the microphone; indeed the dynamic speaker driver, by far the most common type, is a linear motor in the same basic configuration as the dynamic microphone which uses such a motor in reverse, as a generator.

<span class="mw-page-title-main">Tweeter</span> Type of loudspeaker

A tweeter or treble speaker is a special type of loudspeaker that is designed to produce high audio frequencies, typically deliver high frequencies up to 100 kHz. The name is derived from the high pitched sounds made by some birds (tweets), especially in contrast to the low woofs made by many dogs, after which low-frequency drivers are named (woofers).

A woofer or bass speaker is a technical term for a loudspeaker driver designed to produce low frequency sounds, typically from 50 Hz up to 1000 Hz. The name is from the onomatopoeic English word for a dog's bark, "woof". The most common design for a woofer is the electrodynamic driver, which typically uses a stiff paper cone, driven by a voice coil surrounded by a magnetic field.

<span class="mw-page-title-main">Horn loudspeaker</span> Loudspeaker using an acoustic horn

A horn loudspeaker is a loudspeaker or loudspeaker element which uses an acoustic horn to increase the overall efficiency of the driving element(s). A common form (right) consists of a compression driver which produces sound waves with a small metal diaphragm vibrated by an electromagnet, attached to a horn, a flaring duct to conduct the sound waves to the open air. Another type is a woofer driver mounted in a loudspeaker enclosure which is divided by internal partitions to form a zigzag flaring duct which functions as a horn; this type is called a folded horn speaker. The horn serves to improve the coupling efficiency between the speaker driver and the air. The horn can be thought of as an "acoustic transformer" that provides impedance matching between the relatively dense diaphragm material and the less-dense air. The result is greater acoustic output power from a given driver.

OMA or Oma may refer to:

Klipsch Audio Technologies is an American loudspeaker company based in Indianapolis, Indiana. Founded in Hope, Arkansas, in 1946 as 'Klipsch and Associates' by Paul W. Klipsch, the company produces loudspeaker drivers and enclosures, as well as complete loudspeakers for high-end, high-fidelity sound systems, public address applications, and personal computers.

<span class="mw-page-title-main">JBL</span> Audio hardware manufacturer

JBL is an American audio equipment manufacturer headquartered in Los Angeles, California, United States. JBL serves the customer home and professional market. The professional market includes studios, installed/tour/portable sound, cars, music production, DJ, cinema markets, etc. JBL is owned by Harman International, a subsidiary of Samsung Electronics.

Altec Lansing, Inc. is a U.S. audio electronics company founded in 1927. Their primary products are loudspeakers and associated audio electronics for professional, home, automotive and multimedia applications.

Celestion is a British designer and exporter of professional loudspeakers.

<span class="mw-page-title-main">Magnepan</span>

Magnepan is a private high-end audio loudspeaker manufacturer in White Bear Lake, Minnesota, United States. Their loudspeaker technology was conceived and implemented by engineer Jim Winey in 1969.

<span class="mw-page-title-main">Full-range speaker</span> Type of loudspeaker

A full-range loudspeaker drive unit is defined as a driver which reproduces as much of the audible frequency range as possible, within the limitations imposed by the physical constraints of a specific design. The frequency range of these drivers is maximized through the use of a whizzer cone and other means. Most single driver systems, such as those in radios, or small computer speaker designs, cannot reproduce all of the audible frequencies or the entire audible audio range.

<span class="mw-page-title-main">Loudspeaker enclosure</span> Acoustical component

A loudspeaker enclosure or loudspeaker cabinet is an enclosure in which speaker drivers and associated electronic hardware, such as crossover circuits and, in some cases, power amplifiers, are mounted. Enclosures may range in design from simple, homemade DIY rectangular particleboard boxes to very complex, expensive computer-designed hi-fi cabinets that incorporate composite materials, internal baffles, horns, bass reflex ports and acoustic insulation. Loudspeaker enclosures range in size from small "bookshelf" speaker cabinets with 4-inch (10 cm) woofers and small tweeters designed for listening to music with a hi-fi system in a private home to huge, heavy subwoofer enclosures with multiple 18-inch (46 cm) or even 21-inch (53 cm) speakers in huge enclosures which are designed for use in stadium concert sound reinforcement systems for rock music concerts.

<span class="mw-page-title-main">Antique radio</span> Vintage telecommunication audio receiver

An antique radio is a radio receiving set that is collectible because of its age and rarity.

<span class="mw-page-title-main">Moving iron speaker</span>

The moving iron speaker was the earliest type of electric loudspeaker. They are still used today in some miniature speakers where small size and low cost are more important than sound quality. A moving iron speaker consists of a ferrous-metal diaphragm or reed, a permanent magnet and a coil of insulated wire. The coil is wound around the permanent magnet to form a solenoid. When an audio signal is applied to the coil, the strength of the magnetic field varies, and the springy diaphragm or reed moves in response to the varying force on it. The moving iron loudspeaker Bell telephone receiver was of this form. Large units had a paper cone attached to a ferrous metal reed.

<span class="mw-page-title-main">John Kenneth Hilliard</span> American engineer

John Kenneth Hilliard was an American acoustical and electrical engineer who pioneered a number of important loudspeaker concepts and designs. He helped develop the practical use of recording sound for film, and won an Academy Award in 1935. He designed movie theater sound systems, and he worked on radar as well as submarine detection equipment during World War II. Hilliard collaborated with James B. "Jim" Lansing in creating the long-lived Altec Voice of the Theatre speaker system. Hilliard researched high-intensity acoustics, vibration, miniaturization and long-line communications for NASA and the Air Force. Near the end of his career, he standardized noise-control criteria for home construction in California, a pattern since applied to new homes throughout the U.S.

<span class="mw-page-title-main">Electrodynamic speaker driver</span> An individual transducer that converts an electrical audio signal to sound waves

An electrodynamic speaker driver, often called simply a speaker driver when the type is implicit, is an individual transducer that converts an electrical audio signal to sound waves. While the term is sometimes used interchangeably with the term speaker (loudspeaker), it is usually applied to specialized transducers which reproduce only a portion of the audible frequency range. For high fidelity reproduction of sound, multiple loudspeakers are often mounted in the same enclosure, each reproducing a different part of the audible frequency range. In this case the individual speakers are referred to as drivers and the entire unit is called a loudspeaker. Drivers made for reproducing high audio frequencies are called tweeters, those for middle frequencies are called mid-range drivers, and those for low frequencies are called woofers, while those for very low bass range are subwoofers. Less common types of drivers are supertweeters and rotary woofers.

A coaxial loudspeaker is a loudspeaker system in which the individual driver units radiate sound from the same point or axis. Two general types exist: one is a compact design using two or three speaker drivers, usually in car audio, and the other is a two-way high-power design for professional audio, also known as single-source or dual-concentric loudspeakers. The design is favored for its compactness and behavior as an audio point source.

<span class="mw-page-title-main">Altec Lansing Duplex</span> Line of loudspeakers

DUPLEX was the trade name given by Altec Lansing to its line of coaxial loudspeakers, beginning with the first model 601 in 1943. However, the name was most commonly associated with the subsequent model 604 which was a seminal loudspeaker that became a milestone in loudspeaker development. Well over a dozen different models carried the Duplex name over a near 50-year period. The vast majority consisted of a high frequency (HF) compression driver mounted to the back of a large diameter paper cone low frequency (LF) driver. However, there were also a few models with small diameter LF cones and direct radiator tweeters.

Acapella Audio Arts is a German manufacturer of loudspeakers, and one of the oldest hi-fi manufactures in Germany. Acapella Audio was founded by Alfred Rudolph and Herman Winters in 1978 in Duisburg, Germany. Acapella is famous for its heavy horn-loaded speakers that are able to reproduce the whole audible sound spectrum. Other signature characteristic for the products of the company is the widely utilized plasma tweeter technology.

References

  1. 1 2 Sullivan, Robert (2012-03-28). "Inside the World of Sound". The New York Times. ISSN   0362-4331 . Retrieved 2016-10-18.
  2. Chun, Rene. "Tour the Amazing Workspace of Oswalds Mill Audio Founder Jonathan Weiss, Audio Gear Wizard". WIRED. Retrieved 2016-10-18.
  3. "Mini to the Max | The High Fidelity Report". thehighfidelityreport.com. Retrieved 2016-10-18.
  4. ""Sound waves can't be miniaturized": Oswalds Mill Audio and the pinnacle of sound". thevinylfactory.com. 4 March 2016. Retrieved 2016-10-18.
  5. "Are you ready to explore the outer limits of audio?". CNET. Retrieved 2016-10-18.
  6. "Out of the Box: Speakers That Will Double as a Conversation Starter". Observer. 2014-07-30. Retrieved 2016-10-18.
  7. "Extreme audio designs -- at their most audacious (pictures)". CNET. Retrieved 2016-10-18.
  8. "Oswalds Mill Audio Imperia loudspeakers". www.monoandstereo.com. Retrieved 2016-10-18.