Palmerston (car)

Last updated

The Palmerston was a British car made by the Palmerston Motor Company based in Bournemouth, England between 1920 and 1923.

Bournemouth Town in England

Bournemouth is a large coastal resort town on the south coast of England, east of the 96-mile-long (155 km) Jurassic Coast, a World Heritage Site. At the 2011 census, the town had a population of 183,491, making it the largest in Dorset. With Poole to the west and Christchurch in the east, Bournemouth is part of the South East Dorset conurbation, which has a population of 465,000.

Contents

History

The company was founded by the three Bullock brothers who were trading as motor engineers in 1919 [1] . In 1920 they founded the Palmerston Motor Company in Palmerston Road, Boscombe with the ambition of building their own range of light cars. The Palmerston car was advertised for sale in late 1920 and exhibited at the London Motor Show by agents Olympic Aeros and Autos also based in Boscombe. [1]

Boscombe suburb of Bournemouth, Dorset, England

Boscombe is a suburb of Bournemouth, England. Historically in Hampshire, but today in Dorset, it is located to the east of Bournemouth town centre and west of Southbourne.

The company was under capitalised and in 1921 was declared bankrupt and sold to new owners Francis Henry Morris and Bertie Francis Plant trading as the Palmerston Lytcar Company. [1] A new larger engined model was designed and called the Palm and sold alongside the Palmerston. In November 1921 the company was sold again and became Palmcars Ltd with Morris and Plant remaining as directors. [1] The company still failed to make money and receivers were appointed in 1922. It was sold to one of the major shareholders, Frederick Goddard [1] but it seems unlikely that any more cars were made.

The total number of cars made is not known with estimates between 30 and 100. [1]

Palmerston

Palmerston
Overview
ManufacturerPalmerston Motor Company
Production1920-1922
Designer Harold Bullock
Body and chassis
Class light car
Body style two seat open
Powertrain
Engine Coventry-Victor twin cylinder [2]
Transmission 3 speed manual
Chronology
Successornone

The Palmerston had a 6-9 hp Coventry-Victor water cooled, flat twin engine driving the rear wheels through a cone clutch, separately mounted three-speed gearbox and bevel geared rear axle. The brakes acted on the rear wheels using a hand lever with the foot brake operating a transmission brake on the drive shaft behind the gearbox. The steel section chassis had quarter-elliptic leaf springs front and rear. The early cars had wire spoked wheels later replaced by steel disc type.

The two-seat body was built in-house from aluminium over a wood frame and supplied with a folding hood (top) and one piece windscreen. Although the first cars featured acetylene lights, [3] a dynamo lighting set was provided by 1921.

The car was advertised at £275.

Palm

Palm
Overview
ManufacturerPalmerston Lytcar Company
Production1922-1923
Body and chassis
Body style two seat open with dickey seat.
Powertrain
Engine Coventry-Victor 9hp twin cylinder
Transmission 3 speed manual

The Palm had a larger 1018 cc engine, still by Coventry-Victor, with a taxation horsepower class of 9 hp. The gearbox was mounted in-unit with the engine and the gear lever centrally placed. The body now featured a dickey seat but it was also possible to buy a bare chassis for the purchaser to mount their own body on.

In early 1922 the car was advertised at £275 and the smaller car had its price cut to £250. By the end of the year, the price had come down to £245 or £215 for a chassis. [1]

See also

Related Research Articles

Albatros (automobile) defunct automobile manufacturer

The Albatros was an English automobile manufactured in Croft Road, Coventry and founded in 1922 by H.T.W. Manwaring. The origin of the name is reputed to be derived from a play on the name of one Albert Ross, who was Manwaring's mentor and boss earlier in his career.

The Lanchester Motor Company Limited was a car manufacturer located until early 1931 at Armourer Mills, Montgomery Street, Sparkbrook, Birmingham, and afterwards at Sandy Lane, Coventry England. The marque has been unused since the last Lanchester was produced in 1955. The Lanchester Motor Company Limited is still registered as an active company and accounts are filed each year, although as of 2014 it is marked as "non-trading".

Austin 7 car model

The Austin 7 is an economy car that was produced from 1922 until 1939 in the United Kingdom by Austin. It was nicknamed the "Baby Austin" and was at that time one of the most popular cars produced for the British market and sold well abroad. Its effect on the British market was similar to that of the Model T Ford in the US, replacing most other British economy cars and cyclecars of the early 1920s. It was also licensed and copied by companies all over the world. The very first BMW car, the BMW Dixi, was a licensed Austin 7, as were the original American Austins. In France they were made and sold as Rosengarts. In Japan, Nissan also used the 7 design as the basis for their first cars, although not under licence. This eventually led to a 1952 agreement for Nissan to build and sell Austins in Japan under the Austin name.

Albion Motors former British truck manufacturing company

Albion Motors was a Scottish automobile and commercial vehicle manufacturer.

Rolls-Royce Silver Ghost car model

The Rolls-Royce Silver Ghost name refers both to a car model and one specific car from that series.

Coventry Premier brand

Coventry Premier Limited owned a British car and cyclecar manufacturing business based in Coventry from 1912 to 1923. It changed its name from Premier Cycles to Coventry Premier Ltd in November 1914.

Bow-V-Car automobile manufacturer

The Bow-V-Car was an English cyclecar manufactured from 1922 to 1923 by the Plycar Company of Church Road, Upper Norwood, London. The car was designed by Charles Frederick Beauvais who was later better known as a stylist working for coachbuilders New Avon Body Company.

Riley Nine

The Riley Nine was one of the most successful light sporting cars produced by the British motor industry in the inter war period. It was made by the Riley company of Coventry, England with a wide range of body styles between 1926 and 1938.

The Rover 8 was a small single-cylinder eight-horsepower 1327 cc car made by the British Rover car company. It was Rover's first production car. It was remarkable for having a backbone rather than a chassis. The first model was manufactured from 1904 to 1912, A Daimler-Knight sleeve-valve engine option was available in 1911 and 1912.

Wolseley Hornet six lightweight saloon car

The Wolseley Hornet is a six-cylinder twelve fiscal horsepower lightweight automobile which was offered as a saloon car, coupé and open two-seater as well as the usual rolling chassis for bespoke coachwork. Produced by Wolseley Motors Limited from 1930 to 1936, the Hornet was unveiled to the public at the end of April 1930. Wolseley had been bought from the receivers by William Morris in 1927.

Austin 10 hp

The Austin 10 hp is a small car produced between 1910 and 1915 by the British car manufacturer Austin at their Longbridge, Worcestershire plant near Birmingham. 1,336 cars were made, 213 with the 1125 cc engine and 1,123 with the 1615 cc engine. Like the 1087 cc Austin 7 hp produced by both Austin and Du Cros's Swift Motor Company it was not very successful when sold with the small engine.

Rover Light Six

The Rover Light Six was a narrower lightweight short wheelbase variant of their Two-litre sports saloon produced from 1929 to 1930 by the Rover Company of Coventry. The following season it was sold with a 2½-litre 20 hp engine under the name Rover Light Twenty.

Rover 12

The Rover 12 was a name given to several medium-sized family cars from the British Rover car company between 1905 and 1948.

The Marlborough was a make of car sold on the British market between 1906 and 1926. For most of its life the cars were made by Malicet et Blin in France, but after World War I they were partially assembled (finished) in London and an increasing number of British parts used.

Austin Twenty car model

Austin Twenty is a large car introduced by Austin after the end of the First World War, in April 1919 and continued in production until 1930. After the Austin 20/6 model was introduced in 1927, the first model was referred to as the Austin 20/4.

Warren-Lambert

The Warren-Lambert Engineering Co. Ltd. was a British automobile manufacturer that was established from 1912 to 1922 in Richmond, then in Surrey. A. Warren Lambert, was an agent for Morgan cars in Putney which he also raced. In 1912 he designed and started to manufacture a two-seat four-wheel cyclecar from premises in Uxbridge Road, Shepherd's Bush. It was well received and around 25 cars a week were being made.

Vauxhall 23-60 four or five-seater touring car

The Vauxhall 23-60 is a four or five-seater touring car manufactured by Vauxhall of Luton that was announced in July 1922. The 23-60's standard tourer Kington body was described as "preserving that greyhound look so characteristic of the Vauxhall car". It shared many parts with Vauxhall's much more powerful 30-98.

Wilson-Pilcher automobile manufacturer

Wilson-Pilcher is a historic British car brand.

Morris Oxford bullnose

The "bullnose" Morris Oxford is a series of motor car models produced by Morris of the United Kingdom, from 1913 to 1926. It was named by W R Morris after the city in which he grew up and which his cars were to industrialise.

The Rover Two-litre was a mid-size luxury open tourer, saloon or limousine produced from 1927 by the Rover Company of Coventry and available through to 1932. As usual the chassis was also available to coach builders.

References

  1. 1 2 3 4 5 6 7 "Potted Palms and the Palmerston". The Automobile. 26: 48–51. October 2008.
  2. Georgano, N. (2000). Beaulieu Encyclopedia of the Automobile. London: HMSO. ISBN   1-57958-293-1.
  3. Baldwin, N. (1994). A-Z of Cars of the 1920s. Devon, UK: Bay View Books. ISBN   1-870979-53-2.