Pattern 1831 sabre for General Officers

Last updated
Pattern 1831 sabre for General Officers
Production history
Designed1831
ManufacturerVarious
Produced1831 to present
Specifications
LengthBlade - 31.0 in (79 cm)

Blade  typeCurved, slab-sided, asymmetric point, false edge.
Hilt  type'Mameluke hilt' with simple cross-guard.
Scabbard/sheath Brass, wood liners, 2 loose suspension rings, later steel scabbards were introduced.

The Pattern 1831 sabre for General Officers is a British army pattern sword prescribed for the use of officers of the rank of major-general and above. It has been in continuous use from 1831 to the present. It is an example of a type of sword described as a mameluke sabre.

Contents

Background

British Pattern 1831 sabre and scabbard. This particular sword is mid-Victorian and was retailed by J.B. Johnstone of London and Dublin, who were tailors and military outfitters. The blade retains almost all of its original mirror-polished finish Pattern 1831 General Officer's sabre.jpg
British Pattern 1831 sabre and scabbard. This particular sword is mid-Victorian and was retailed by J.B. Johnstone of London and Dublin, who were tailors and military outfitters. The blade retains almost all of its original mirror-polished finish

Both French and British army officers encountered kilij and shamshir sabres as a result of Napoleon's expedition to Egypt (1798–1801). Termed 'mameluke sabres' after the Mamluk warrior caste of Egypt, they became a fashionable accessory for officers, particularly senior officers. Similar swords were also found in India, and these probably influenced British officers also. Mameluke swords, both Middle Eastern and copies made in Europe, were adopted, unofficially, by officers of light cavalry regiments in the first decade of the 19th century, some were used as 'walking out swords' (for ornamental wear on social occasions on foot) but others were employed on active campaign. They are prominent in images of officers of the British Hussar regiments painted by Robert Dighton jr. in 1807. [1] As officially regulated dress or levée swords they first appear in 1822 for lancer regiments. Soon, other light cavalry and some heavy cavalry regiments also adopted similar patterns. [2]

In 1822, generals and staff officers adopted a variant of the 1822 infantry officer's sword (often referred to as the 'Gothic hilt sabre'). It differed only in minor decorative elements of the guard and in the decoration of the blade. [3] The decision to introduce a mameluke sword as the official regulation sword for officers of the rank of major-general and above is generally ascribed to the Duke of Wellington, who is known to have favoured this type of sword himself. [4]

Design

Hilt of the Pattern 1831 sabre. This sword has grip scales of mammoth ivory. Pattern 1831 General Officer's sabre (hilt).jpg
Hilt of the Pattern 1831 sabre. This sword has grip scales of mammoth ivory.
Detail of frost-etched decoration of the blade, showing a crown over the 'VR' monogram of Queen Victoria. Pattern 1831 General Officer's sabre (blade decoration).jpg
Detail of frost-etched decoration of the blade, showing a crown over the 'VR' monogram of Queen Victoria.

The 1831 pattern general officer's sabre was directly influenced by existing mameluke swords worn by officers of various cavalry regiments. It differs from the levée sword of the 3rd Light Dragoons only in very minor elements of decoration. [5]

The hilt and blade retain many features of the Turkish kilij from which it was derived. These include the simple cross-guard with two opposing langets and the down curving 'pistol-grip' shaped pommel; the blade retains the yelman false-edge and the step to the back of the blade (latchet) close to it. As a dress sword, it is of relatively lightweight construction. The weight of the sword is about 1 lb 10.5 oz (750 g) and the scabbard about 1 lb 1 oz (480 g). [6] The 31 inch-long (79 cm) blade is slab-sided and of a V-shaped cross-section, it is double-edged for its last 12 inches (the yelman) and comes to a relatively acute asymmetric point. The flat sides of the blade afford a large area for decoration. This decoration, of acid-etching (often described as 'frost-etched'), varies greatly between makers but usually includes: a crossed baton and sabre, the monarch's monogram under a crown, and sprigs of oak or palm (or both). Acanthus leaf and scrolling plant motifs may also be present. Many blades were produced with a reserved section where the purchaser could have his initials or family crest added. [7] [8]

The hilt has a cross-guard with its écusson decorated with an oak leaf and acorn civic crown containing a crossed baton and sabre. The hilt elements (guard, grip scales and strap) are held together and attached to the blade tang by two bolts hidden by brass rosettes. The prominent sword-knot hole has bushing in two parts which also screw together, adding to the solidity of the hilt. All the metallic hilt elements are of gilt-brass. [9] The grip scales were originally of ivory, either elephant or mammoth, but in late Victorian times synthetic ivory-substitutes (such as 'ivorine') began to be used. Recent and modern swords were/are only produced using synthetic ivory. [10] [11]

The 1831 sabre was initially produced with two scabbards, a black leather scabbard with elaborate gilt mounts intended for lévees and evening functions and a brass scabbard for all other occasions. In practise the leather scabbard was soon dispensed with and the brass scabbard used universally. The brass scabbard has wood liners, two cross-shaped mounts for loose suspension rings and a square toe with a vestigial shoe/drag. In 1898 the brass scabbard was replaced by a steel scabbard of the same form. [12]

The pattern was also adopted for field marshals, royal equerries and lords lieutenant of counties, with only minor differences in decoration. The cross-guard écusson decoration of crossed baton and sabre is replaced by two crossed batons for field marshals, royal equerries employ the monarch's cypher and lords lieutenant use national symbols appropriate to their county (rose for England, thistle for Scotland, shamrock for Northern Ireland and 'Prince of Wales' feathers' for Wales). [13]

Use

Despite the blades of the 1831 sabre having to pass an official proving test (many specimens have brass 'proof slugs' inset into the blade near the hilt) the sword was never intended for combat use. The description of the proof test includes the phrase, "The blade recovers straightness after being subjected to a weight of 10 lbs vertically with 1 inch depression". [14] The blades are of too light a weight for effective cutting and are too flexible for thrusting. Throughout the 19th century, when on active campaign, generals employed the service swords particular to the corps they were a member of before their promotion. This was officially recognised in the Dress Regulations of 1900. The sabre was and is intended for dress wear, at levées, parades, inspections and other formal occasions when full-dress would be worn. [15]

See also

Notes

  1. Mollo, plate 13
  2. Robson, p.69
  3. Robson, p.143
  4. Robson, p.145
  5. Robson, p.71
  6. Stephens, p.140
  7. Robson, pp.144-145
  8. Busch, P.
  9. Stephens, p.140
  10. Robson, p.145
  11. Busch, P.
  12. Robson, p.145
  13. Robson, p.145
  14. Stephens, p.140
  15. Robson, p.145

Related Research Articles

A sword is an edged, bladed weapon intended for manual cutting or thrusting. Its blade, longer than a knife or dagger, is attached to a hilt and can be straight or curved. A thrusting sword tends to have a straighter blade with a pointed tip. A slashing sword is more likely to be curved and to have a sharpened cutting edge on one or both sides of the blade. Many swords are designed for both thrusting and slashing. The precise definition of a sword varies by historical epoch and geographic region.

<span class="mw-page-title-main">Sabre</span> Type of backsword

A sabre is a type of backsword with a curved blade associated with the light cavalry of the early modern and Napoleonic periods. Originally associated with Central European cavalry such as the hussars, the sabre became widespread in Western Europe during the Thirty Years' War. Lighter sabres also became popular with infantry of the early 17th century. In the 19th century, models with less curving blades became common and were also used by heavy cavalry.

<span class="mw-page-title-main">Shamshir</span> Type of Persian/Iranian curved sword

A shamshir is a type of Persian/Iranian sword with a radical curve. The name is derived from the Persian word shamshīr, which means "sword". The curved "scimitar" sword family includes the shamshir, kilij, talwar, pulwar, and nimcha.

<span class="mw-page-title-main">Kilij</span> Sword

A kilij is a type of one-handed, single-edged and curved scimitar used by the Seljuk Empire, Timurid Empire, Mamluk Empire, Ottoman Empire, and other Turkic khanates of Eurasian steppes and Turkestan. These blades developed from earlier Turko-Mongol sabers that were in use in lands controlled or influenced by the Turkic peoples.

<span class="mw-page-title-main">Talwar</span> Type of sword from the Indian subcontinent

The talwar, also spelled talwaar and tulwar, is a type of curved sword or sabre from the Indian subcontinent.

<span class="mw-page-title-main">Mameluke sword</span> Type of curved sword

A Mameluke sword is a cross-hilted, curved, scimitar-like sword historically derived from sabres used by Mamluk warriors of Mamluk Egypt after whom the sword is named. Egypt was, at least nominally, part of the Ottoman Empire and the sword most commonly used in Egypt was the same as used elsewhere in the empire, the kilij.

<span class="mw-page-title-main">Shashka</span> Cossack sword

The shashka or shasqua is a kind of North Caucasian sabre; a single-edged, single-handed, and guardless backsword. The comparatively subtle curve of a shashka blade puts the weapon midway between a typically curved sabre and a straight sword, effective for both cutting and thrusting.

<span class="mw-page-title-main">Crossguard</span> Type of sword guard made of two quillons

On a sword, the crossguard, or cross-guard, the individual bars on either side known as quillon, is a bar of metal at right angles to the blade, placed between the blade and the hilt.

<span class="mw-page-title-main">Pattern 1908 cavalry sword</span> Type of cavalry sword

The Pattern 1908 cavalry trooper's sword was the last service sword issued to the cavalry of the British Army. It has been called the most effective cavalry sword ever designed, although its introduction occurred as swords finally became obsolete as military weapons. In use, it, like other thrust-based cavalry swords, is best described as a one-handed lance, due to its complete lack of utility for anything but the charge. In fact, the closely related US Model 1913 Cavalry Saber was issued with only a saddle scabbard, as it was not considered to be of much use to a dismounted cavalryman. Colonial troops, who could expect to engage in melee combat with opposing cavalry frequently carried cut and thrust swords either instead of, or in addition to, the P1908/1912.

<span class="mw-page-title-main">Gothic hilted British infantry swords</span>

The gothic hilted swords were a family of swords carried by officers and some NCOs of the British Army between 1822 and the present day. They were primarily infantry swords, although they were also regulation pattern for some other officers such as surgeons and staff officers. The term "Gothic hilt" is derived from a perceived similarity between the curved bars of the guard and the arches found in Gothic architecture. They were elegant aesthetically pleasing weapons, although they were considered by some to be mediocre fighting swords. The weapon and its variants had a very long service life.

<span class="mw-page-title-main">Pattern 1796 infantry officer's sword</span>

The Pattern 1796 British infantry officer's sword was carried by officers of the line infantry in the British Army between 1796 and the time of its official replacement with the gothic hilted sword in 1822. This period encompassed the whole of the Napoleonic Wars.

<span class="mw-page-title-main">United States Marine Corps noncommissioned officer's sword</span> Sword

The Marine Corps noncommissioned officer's sword is a sword worn by noncommissioned officers (NCOs) and staff noncommissioned officers (SNCOs) of the United States Marine Corps. The NCO sword was adopted in 1859 and is patterned after the United States Army's foot officers' sword of 1850. The M1859 NCO sword continues service today as the Marine Corps drill and ceremonial sword. The sword's use is restricted by regulation to ceremonial occasions by an NCO or Staff NCO in charge of troops under arms or at weddings and wedding receptions where at least one of those being married is in uniform and has the rank of Corporal or higher.

The 1897 pattern infantry officers’ sword is a straight-bladed, three-quarter basket-hilted sword that has been the regulation sword for officers of the line infantry of the British Army from 1897 to the present day.

The Pattern 1796 light cavalry sabre is a sword that was used primarily by British light dragoons and hussars, and King's German Legion light cavalry during the Napoleonic Wars. It was adopted by the Prussians and used by Portuguese and Spanish cavalry.

<span class="mw-page-title-main">Model 1840 army noncommissioned officers' sword</span> Sword

The Model 1840 noncommissioned officers' sword was adopted by the United States military in 1840. Based primarily on a sword used by the French Army, the model 1840 NCO proved somewhat heavy hilted and ill balanced. For over 70 years, it was widely used by the Army; today its usage is restricted to ceremonial occasions. The sword had a 31-inch blade, a cast brass hilt resembling the more expensive wire-wrapped leather grips, and a leather scabbard rather than the steel used by cavalry troopers and officers, although some makers, such as Emerson and Silver, issued a steel scabbard rather than leather to protect from wear. Leather scabbards were phased out beginning in 1868.

<span class="mw-page-title-main">Pattern 1796 heavy cavalry sword</span> Weapon

The Pattern 1796 heavy cavalry sword was the sword used by the British heavy cavalry, and King's German Legion Dragoons, through most of the period of the Revolutionary and Napoleonic Wars. It played an especially notable role, in the hands of British cavalrymen, at the battles of Salamanca and Waterloo. The pattern was adopted by Sweden and was used by some Portuguese cavalry.

<i>Guntō</i> Japanese military sword, 1872-1945

The guntō was a ceremonial sword produced for the Imperial Japanese army and navy after the introduction of conscription in 1872.

<span class="mw-page-title-main">Kastane</span> Sword

A kasthane is a short traditional ceremonial or decorative single-edged Sri Lankan sword. The sword is featured in the Flag of Sri Lanka.

<span class="mw-page-title-main">Turko-Mongol sabers</span> Type of cavalry sabre

These swords were used by the Turkic and Mongolic nomads of the Eurasian steppes primarily between the 8th and 14th centuries. One of the earliest recorded sabres of this type was recovered from an Avar grave in Romania dating to the mid-7th century.

<span class="mw-page-title-main">Royal Navy cutlasses</span> Swords in British military service 1804–1936

Ratings of the Royal Navy have used cutlasses, short, wide bladed swords, since the early 18th century. These were originally of non-uniform design but the 1804 Pattern, the first Navy-issue standard cutlass, was introduced at the start of the 19th century. This was a bluntish weapon that was perhaps intended for cutting away canvas and ropes rather than as a thrusting combat weapon. The 1845 Pattern cutlass introduced a bowl-style hand guard which provided greater protection, with a longer and more curved blade. Its sharper point made it more useful for thrusting attacks, which were now emphasised in the drill manual. The 1845 Pattern was modified several times including shortening and straightening the blades, which weakened them. The 1889 Pattern had a straight, spear-pointed blade with a hilt that curved outwards to catch and redirect an opponent's sword point. The 1900 Pattern, the last navy-issue cutlass, was similar to its predecessor with the introduction of a fuller and a hilt insert that cushioned the user's little finger. The cutlass was withdrawn from service in 1936 but remains in use for ceremonial purposes. It is thought that it was last used in combat in 1900 during the Boxer Rebellion.

References