Persistent radical effect

Last updated

The persistent radical effect (PRE) in chemistry describes and explains the selective product formation found in certain free-radical cross-reactions. In these type of reactions, different radicals compete in secondary reactions. The so-called persistent (long-lived) radicals do not self-terminate and only react in cross-couplings. In this way, the cross-coupling products in the product distribution are more prominent. [1] [2] [3]

The effect was first described in 1936 by Bachmann & Wiselogle. [4] They heated pentaphenylethane and observed that the main reaction product was the starting product (87%) with only 2% of tetraphenylethane formed. They concluded that the dissociation of pentaphenylethane into triphenylmethyl and diphenylmethyl radicals was reversible and that persistent triphenylmethyl did not self terminate and transient diphenylmethyl did to a certain extent. [1] In 1964, Perkins [1] [5] [6] performed a similar reaction with phenylazotriphenylmethane in benzene. Again, the dimerization product of the persistent radical (phenylcyclohexydienyl) was absent as reaction product. In 1981, Geiger and Huber found that the photolysis of dimethylnitrosamine into dimethylaminyl radical and nitrous oxide was also completely reversible. [2] [7] A similar effect was observed by Kräutler in 1984 for methylcobalamin. [8] [9] The term 'persistent radical effect' was coined in 1992 by Daikh and Finke in their work related to the thermolysis of a cyanocobalamin model compound. [10]

The PRE is a kinetic feature which provides a self-regulating effect in certain controlled/living radical polymerization systems such as atom transfer radical polymerization and nitroxide mediated polymerization. Propagating radicals Pn* are rapidly trapped in the deactivation process (with a rate constant of deactivation, kdeact) by species X, which is typically a stable radical such as a nitroxide. The dormant species are activated (with a rate constant kact) either spontaneously/thermally, in the presence of light, or with an appropriate catalyst (as in ATRP) to reform the growing centers. Radicals can propagate (kp) but also terminate (kt). However, persistent radicals (X), as stated above, cannot terminate with each other but only (reversibly) cross-couple with the growing species (kdeact). Thus, every act of radical–radical termination is accompanied by the irreversible accumulation of X. Consequently, the concentration of radicals as well as the probability of termination decreases with time. The growing radicals (established through the activation–deactivation process) then predominantly react with X rather than with themselves. [11]

Related Research Articles

In polymer chemistry, living polymerization is a form of chain growth polymerization where the ability of a growing polymer chain to terminate has been removed. This can be accomplished in a variety of ways. Chain termination and chain transfer reactions are absent and the rate of chain initiation is also much larger than the rate of chain propagation. The result is that the polymer chains grow at a more constant rate than seen in traditional chain polymerization and their lengths remain very similar. Living polymerization is a popular method for synthesizing block copolymers since the polymer can be synthesized in stages, each stage containing a different monomer. Additional advantages are predetermined molar mass and control over end-groups.

In organic chemistry, a carbene is a molecule containing a neutral carbon atom with a valence of two and two unshared valence electrons. The general formula is R−:C−R' or R=C: where the R represents substituents or hydrogen atoms.

<span class="mw-page-title-main">Cage effect</span> Behavior of molecules in solvent as encapsulated particles

In chemistry, the cage effect (also known as geminate recombination) describes how the properties of a molecule are affected by its surroundings. First introduced by Franck and Rabinowitch in 1934, the cage effect suggests that instead of acting as an individual particle, molecules in solvent are more accurately described as an encapsulated particle. The encapsulated molecules or radicals are called cage pairs or geminate pairs. In order to interact with other molecules, the caged particle must diffuse from its solvent cage. The typical lifetime of a solvent cage is 10-11 seconds. Many manifestations of the cage effect exist.

Atom transfer radical polymerization (ATRP) is an example of a reversible-deactivation radical polymerization. Like its counterpart, ATRA, or atom transfer radical addition, ATRP is a means of forming a carbon-carbon bond with a transition metal catalyst. Polymerization from this method is called atom transfer radical addition polymerization (ATRAP). As the name implies, the atom transfer step is crucial in the reaction responsible for uniform polymer chain growth. ATRP was independently discovered by Mitsuo Sawamoto and by Krzysztof Matyjaszewski and Jin-Shan Wang in 1995.

<span class="mw-page-title-main">Reversible addition−fragmentation chain-transfer polymerization</span>

Reversible addition−fragmentation chain-transfer or RAFT polymerization is one of several kinds of reversible-deactivation radical polymerization. It makes use of a chain-transfer agent in the form of a thiocarbonylthio compound to afford control over the generated molecular weight and polydispersity during a free-radical polymerization. Discovered at the Commonwealth Scientific and Industrial Research Organisation (CSIRO) of Australia in 1998, RAFT polymerization is one of several living or controlled radical polymerization techniques, others being atom transfer radical polymerization (ATRP) and nitroxide-mediated polymerization (NMP), etc. RAFT polymerization uses thiocarbonylthio compounds, such as dithioesters, thiocarbamates, and xanthates, to mediate the polymerization via a reversible chain-transfer process. As with other controlled radical polymerization techniques, RAFT polymerizations can be performed with conditions to favor low dispersity and a pre-chosen molecular weight. RAFT polymerization can be used to design polymers of complex architectures, such as linear block copolymers, comb-like, star, brush polymers, dendrimers and cross-linked networks.

<span class="mw-page-title-main">Reactivity–selectivity principle</span>

In chemistry the reactivity–selectivity principle or RSP states that a more reactive chemical compound or reactive intermediate is less selective in chemical reactions. In this context selectivity represents the ratio of reaction rates.

A Norrish reaction in organic chemistry is a photochemical reaction taking place with ketones and aldehydes. Such reactions are subdivided into Norrish type I reactions and Norrish type II reactions. The reaction is named after Ronald George Wreyford Norrish. While of limited synthetic utility these reactions are important in the photo-oxidation of polymers such as polyolefins, polyesters, certain polycarbonates and polyketones.

Chain transfer is a polymerization reaction by which the activity of a growing polymer chain is transferred to another molecule.

The Barton reaction, also known as the Barton nitrite ester reaction, is a photochemical reaction that involves the photolysis of an alkyl nitrite to form a δ-nitroso alcohol.

<span class="mw-page-title-main">Photo-oxidation of polymers</span>

In polymer chemistry photo-oxidation is the degradation of a polymer surface due to the combined action of light and oxygen. It is the most significant factor in the weathering of plastics. Photo-oxidation causes the polymer chains to break, resulting in the material becoming increasingly brittle. This leads to mechanical failure and, at an advanced stage, the formation of microplastics. In textiles the process is called phototendering.

<span class="mw-page-title-main">Thiol-yne reaction</span>

The thiol-yne reaction is an organic reaction between a thiol and an alkyne. The reaction product is an alkenyl sulfide. The reaction was first reported in 1949 with thioacetic acid as reagent and rediscovered in 2009. It is used in click chemistry and in polymerization, especially with dendrimers.

Cobalt based catalysts, when used in radical polymerization, have several main advantages especially in slowing down the reaction rate, allowing for the synthesis of polymers with peculiar properties. As starting the reaction does need a real radical initiator, the cobalt species is not the only used catalyst, it is a mediator. For this reason this type of reaction is referred to as cobalt mediated radical polymerization.

Living free radical polymerization is a type of living polymerization where the active polymer chain end is a free radical. Several methods exist. IUPAC recommends to use the term "reversible-deactivation radical polymerization" instead of "living free radical polymerization", though the two terms are not synonymous.

<span class="mw-page-title-main">TEMPO</span> Chemical compound

(2,2,6,6-Tetramethylpiperidin-1-yl)oxyl or (2,2,6,6-tetramethylpiperidin-1-yl)oxidanyl, commonly known as TEMPO, is a chemical compound with the formula (CH2)3(CMe2)2NO. This heterocyclic compound is a red-orange, sublimable solid. As a stable aminoxyl radical, it has applications in chemistry and biochemistry. TEMPO is used as a radical marker, as a structural probe for biological systems in conjunction with electron spin resonance spectroscopy, as a reagent in organic synthesis, and as a mediator in controlled radical polymerization.

Radical disproportionation encompasses a group of reactions in organic chemistry in which two radicals react to form two different non-radical products. Radicals in chemistry are defined as reactive atoms or molecules that contain an unpaired electron or electrons in an open shell. The unpaired electrons can cause radicals to be unstable and reactive. Reactions in radical chemistry can generate both radical and non-radical products. Radical disproportionation reactions can occur with many radicals in solution and in the gas phase. Due to the reactive nature of radical molecules, disproportionation proceeds rapidly and requires little to no activation energy. The most thoroughly studied radical disproportionation reactions have been conducted with alkyl radicals, but there are many organic molecules that can exhibit more complex, multi-step disproportionation reactions.

Nitroxide-mediated radical polymerization is a method of radical polymerization that makes use of an nitroxide initiator to generate polymers with well controlled stereochemistry and a very low dispersity. It is a type of reversible-deactivation radical polymerization.

Reversible deactivation radical polymerizations (RDRPs) are members of the class of reversible deactivation polymerizations which exhibit much of the character of living polymerizations, but cannot be categorized as such as they are not without chain transfer or chain termination reactions. Several different names have been used in literature, which are:

In polymer chemistry, degenerative chain transfer is a process that can occur in a radical polymerization whereby reactivity of active centres are changed, hence significantly influencing the molecular weight distribution of the resulting product.

An organic radical battery (ORB) is a type of battery first developed in 2005. As of 2011, this type of battery was generally not available for the consumer, although their development at that time was considered to be approaching practical use. ORBs are potentially more environmentally friendly than conventional metal-based batteries, because they use organic radical polymers to provide electrical power instead of metals. ORBs are considered to be a high-power alternative to the Li-ion battery. Functional prototypes of the battery have been researched and developed by different research groups and corporations including the Japanese corporation NEC.

Copper(0)-mediated reversible-deactivation radical polymerization(Cu -mediated RDRP) is a member of the class of reversible-deactivation radical polymerization. As the name implies, metallic copper is employed as the transition-metal catalyst for reversible activation/deactivation of the propagating chains responsible for uniform polymer chain growth.

References

  1. 1 2 3 The Persistent Radical Effect:  A Principle for Selective Radical Reactions and Living Radical Polymerizations Hanns Fischer Chemical Reviews 2001 101 (12), 3581-3610 doi:10.1021/cr990124y
  2. 1 2 Studer, A. (2001), The Persistent Radical Effect in Organic Synthesis. Chem. Eur. J., 7: 1159–1164. doi:10.1002/1521-3765(20010316)7:6<1159::AID-CHEM1159>3.0.CO;2-I
  3. ↑ Radicals: Reactive Intermediates with Translational Potential Ming Yan, Julian C. Lo, Jacob T. Edwards, and Phil S. Baran Journal of the American Chemical Society 2016 138 (39), 12692-12714 doi:10.1021/jacs.6b08856
  4. ↑ THE RELATIVE STABILITY OF PENTAARYLETHANES. III.1 THE REVERSIBLE DISSOCIATION OF PENTAARYLETHANES W. E. BACHMANN and F. Y. WISELOGLE The Journal of Organic Chemistry 1936 01 (4), 354-382 doi:10.1021/jo01233a006
  5. ↑ 1145. The thermal decomposition of phenylazotriphenylmethane in p-xylene M. J. Perkins J. Chem. Soc., 1964, 5932-5935 doi:10.1039/JR9640005932
  6. ↑ Mechanisms of free-radical aromatic substitution D.H. Hey, M.J. Perkins Gareth H. William Tetrahedron Letters Volume 4, Issue 7, 1963, Pages 445-452 doi:10.1016/S0040-4039(01)90654-9
  7. ↑ Geiger, G. and Huber, J. R. (1981), Photolysis of dimethylnitrosamine in the gas phase. HCA, 64: 989–995. doi:10.1002/hlca.19810640405
  8. ↑ Kräutler, B. (1984), Acetyl-cobalamin from Photoinduced Carbonylation of Methyl-cobalamin. HCA, 67: 1053–1059. doi:10.1002/hlca.19840670418
  9. ↑ Unusual selectivities of radical reactions by internal suppression of fast modes Hanns. Fischer Journal of the American Chemical Society 1986 108 (14), 3925-3927 doi:10.1021/ja00274a012
  10. ↑ The persistent radical effect: a prototype example of extreme, 105 to 1, product selectivity in a free-radical reaction involving persistent .cntdot.CoII[macrocycle] and alkyl free radicals Brian E. Daikh and Richard G. Finke Journal of the American Chemical Society 1992 114 (8), 2938-2943 doi:10.1021/ja00034a028
  11. ↑ Braunecker, Wade A.; Matyjaszewski, Krzysztof (2007). "Controlled/living radical polymerization: Features, developments, and perspectives". Progress in Polymer Science. 32: 93–146. doi:10.1016/j.progpolymsci.2006.11.002.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.