Phantom X1

Last updated
Phantom X1
PhantomX1.JPG
Role Ultralight aircraft
National origin United States
Manufacturer Phantom Aeronautics
First flight1982
Introduction1982
StatusIn production
Number built1700 (as of 2000)
Variants Bell Sidewinder
Hy-Tek Hurricane 103
Golden Gate Mosquito
Worldwide Ultralite Spitfire

The Phantom X1 is a single-engined, tractor configuration, single seat, cable-braced high wing tricycle gear-equipped ultralight aircraft that is produced by Phantom Aeronautics of Three Rivers, Michigan and available in kit form. [1] [2] [3] [4]

Contents

The X1 design was intended to have an empty weight under 254 lb (115 kg) to fit into the FAR Part 103 ultralight category. There is also an X2 two seater which was designed as an ultralight trainer. Modernized models of the single and two-seaters use struts in place of the original cable-bracing. [1] [2] [3]

Design and development

The Phantom X1 was introduced at Sun 'n Fun in 1982, where it attracted a great deal of attention and won a major design award. The design was produced by a number of different manufacturers, including Phantom Aircraft of Kalamazoo, Michigan and has been widely copied. Derivative designs include the Bell Sidewinder, Hy-Tek Hurricane 103, Worldwide Ultralite Spitfire and the Golden Gate Mosquito. [1]

The Phantom X1 is constructed from bolted-together aluminum tubing. The wings and tail surfaces are covered in Dacron sailcloth in the form of pre-sewn envelopes. The wings are wire-braced from an inverted V-shaped kingpost and feature full-span ailerons. There was also a factory option offered to allow the wings to fold for transport and storage. The engine is mounted on the front of the main tube, the tail being mounted on the far end of the same tube. The cockpit pod is made from fiberglass. The landing gear includes a steerable nosewheel. [1]

The X1 was originally designed as an aerobatic aircraft and was tested to +9/-6.6 g before failure and carries operational limits of +6.6/-4.4 g. The full-span ailerons also give the X1 a fast roll-rate. For liability reasons the X1 was never marketed as an aerobatic design. [1]

Factory options included brakes and a complete airframe parachute along with a variety of Rotax engines from 40 to 64 hp (30 to 48 kW). Original assembly time was rated by the manufacturer as 40 hours. [1] [3]

Variants

X1
Single seat ultralight aircraft with aerobatic capabilities, first flown in 1982. Standard engine is the 40 hp (30 kW) Rotax 447, with the 50 hp (37 kW) Rotax 503 or 64 hp (48 kW) Rotax 582 as options. In the USA the aircraft could be completed as a FAR Part 103 ultralight vehicle or as an Experimental amateur-built aircraft. Still in production as the Phantom Classic. [1] [2] [3]
X1E
Similar to the X1, but with an enclosed cockpit for all-weather flying. The cockpit features removable doors. Still in production as the Phantom Classic E. [5]
X2
Two seat side-by-side configuration ultralight trainer, first flown in 1995, with first deliveries in February 1998. Folding wings were a factory option. Standard engine is the 50 hp (37 kW) Rotax 503 or 64 hp (48 kW) Rotax 582 as an option. [1] [2] [3]
Phantom I
Single seat ultralight aircraft with struts in place of cable-bracing. Standard engine is the 50 hp (37 kW) Rotax 503 with the 64 hp (48 kW) Rotax 582 as an option. [6]
Phantom I-E
Single seat ultralight aircraft with struts in place of cable-bracing and enclosed cockpit with removable doors. Standard engine is the 50 hp (37 kW) Rotax 503 with the 64 hp (48 kW) Rotax 582 as an option. [6]
Phantom II
Two seat side-by-side configuration ultralight trainer with struts in place of cable-bracing. Engines include the 64 hp (48 kW) Rotax 582, 85 hp (63 kW) Jabiru 2200 or the 80 hp (60 kW) Rotax 912. [6]

Specifications (X1)

Data from Kitplanes [2]

General characteristics

Performance

See also

Aircraft of comparable role, configuration, and era

Related Research Articles

<span class="mw-page-title-main">Advanced Aeromarine Buccaneer</span> American amphibious flying boat

The Buccaneer is a one- or two-seat ultralight high-wing amphibious flying boat of pusher configuration marketed as a kit aircraft.

<span class="mw-page-title-main">Lockwood Drifter</span> Type of aircraft

The Lockwood Drifter is a family of high wing, single engine, pusher configuration, open cockpit, one and two-seat kit aircraft that was first introduced in the 1980s by Maxair and remains in production today by Lockwood Aircraft of Sebring, Florida.

<span class="mw-page-title-main">Flightstar</span> Type of aircraft

The Flightstar is a large family of single and two-seat, high wing, single engined kit aircraft that was produced by Flightstar Sportplanes of South Woodstock, Connecticut. In 2009 the rights, tooling and parts inventory were sold to Yuneec International of China when Flightstar Sportplanes' business was wound up.

<span class="mw-page-title-main">CGS Hawk</span> Type of aircraft

The CGS Hawk is a family of high wing, strut-braced, pusher configuration, single and two-seats-in-tandem ultralight aircraft, designed by Chuck Slusarczyk and manufactured by CGS Aviation.

The Hy-Tek Hurricane 103 is a family of single-engined, high wing tricycle gear-equipped aircraft that were available in kit form from Hy-Tek Hurricane of Aurora, Oregon.

<span class="mw-page-title-main">Kolb Firestar</span> Type of aircraft

The Kolb Firestar is a family of American open cockpit, high wing, pusher configuration, conventional landing gear-equipped ultralight aircraft that was produced in kit form by Kolb Aircraft of Phoenixville, Pennsylvania and intended for amateur construction.

<span class="mw-page-title-main">Rans S-12 Airaile</span> Type of aircraft

The Rans S-12 Airaile is a family of related American single-engined, pusher configuration, high-wing monoplanes designed by Randy Schlitter and manufactured by Rans Inc. The aircraft are available in kit form for amateur construction.

<span class="mw-page-title-main">Sport Flight Talon</span> Type of aircraft

The Sport Flight Talon is a high-wing, pusher configuration single-engine, conventional landing gear homebuilt aircraft or ultralight aircraft, that was produced by Sport Flight Aviation of Sandy, Oregon in kit form for amateur construction.

<span class="mw-page-title-main">Golden Circle Air T-Bird</span> Type of aircraft

The Golden Circle Air T-Bird is a family of high-wing, strut-braced, pusher configuration ultralight aircraft that was produced by Teratorn Aircraft of Clear Lake, Iowa from 1983 to 1989 and then Golden Circle Air of De Soto, Iowa from 1989 until the mid-2000s. From 2011-2021 the aircraft were back in production by Indy Aircraft and from 2021 on by Tbird Aircraft. The aircraft is produced as a kit for amateur construction.

<span class="mw-page-title-main">Joplin Tundra</span> CzechCanadian ultralight aircraft

The Joplin Tundra is a family of Canadian, high-wing, strut-braced, pusher configuration ultralight aircraft that was originally produced by Back Forty Developments of Campbellford, Ontario, Canada and later by Joplin Light Aircraft of Joplin, Missouri and Laron Aviation of Borger, Texas for amateur construction. The aircraft is out of production.

<span class="mw-page-title-main">SlipStream Genesis</span> Type of aircraft

The SlipStream Genesis is a family of American, strut-braced, high wing, pusher configuration, tricycle gear aircraft, produced in kit form, for amateur construction. Designed by Chuck Hamilton, the series were originally produced by Innovation Engineering of Davenport, Iowa and more recently by SlipStream International of Wautoma, Wisconsin.

<span class="mw-page-title-main">M-Squared Breese</span> Type of aircraft

The M-Squared Breese is a large family of high-wing, strut-braced, pusher configuration, tricycle gear, ultralight aircraft produced by M-Squared Aircraft of St. Elmo, Alabama in kit form, for amateur construction.

The Worldwide Ultralite Spitfire is an American ultralight aircraft that was designed by Fred Bell and manufactured by Worldwide Ultralite Industries and later by Don Ecker and Air Magic Ultralights of Houston, Texas. The aircraft was supplied as a kit for amateur construction.

<span class="mw-page-title-main">Air Creation GT</span> Type of aircraft

The Air Creation GT and Clipper are a series of French two-seat flying wing ultralight trikes that was designed and produced by Air Creation.

<span class="mw-page-title-main">Airborne Edge</span> Type of aircraft

The Airborne Edge is a line of Australian two-seat ultralight trikes designed and produced by Airborne Windsports of Redhead, New South Wales. The aircraft are supplied as a completed aircraft and not as a kit.

<span class="mw-page-title-main">Airborne XT</span> Type of aircraft

The Airborne XT is an Australian series of two-seat flying wing ultralight trikes designed and produced by Airborne Windsports and introduced in 2003.

The North Wing Apache is an American two-seat ultralight trike designed and produced by North Wing Design of East Wenatchee, Washington. The aircraft is supplied as a kit for amateur construction.

The BAaer Gurí is an Argentine ultralight aircraft, designed and produced by BAaer (BA-Aeroplanos) of Buenos Aires. When it was available the aircraft was supplied as a kit for amateur construction.

<span class="mw-page-title-main">Flylab Tucano</span> Italian ultralight aircraft

The Flylab Tucano is an Italian ultralight aircraft, produced by Flylab, of Ischitella. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft. The aircraft was produced in the 1990s by Ferrari ULM of Castelbaldo.

The Krasniye Kryl'ya Deltacraft MD-50C is a Russian ultralight trike, designed and produced by Krasniye Kryl'ya of Taganrog. The aircraft is supplied as a complete ready-to-fly-aircraft.

References

  1. 1 2 3 4 5 6 7 8 Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, pages B-45, B-93 and E-33. Cybair Limited Publishing, 2001. ISBN   0-9680628-1-4
  2. 1 2 3 4 5 Downey, Julia: 1999 Kit Aircraft Directory, Kitplanes, Volume 15, Number 12, December 1998, page 61. Primedia Publications. ISSN 0891-1851
  3. 1 2 3 4 5 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, page 221. BAI Communications. ISBN   0-9636409-4-1
  4. ↑ Phantom Aeronautics (2003). "Welcome to Phantom Aeronautics" . Retrieved 17 August 2010.
  5. ↑ U.S. AirBorne Sport Aviation (n.d.). "Ultralight Aircraft Sales" . Retrieved 17 August 2010.{{cite web}}: CS1 maint: year (link)
  6. 1 2 3 Phantom Aeronautics (2003). "Phantom Aircraft Specifications" . Retrieved 17 August 2010.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.