Eclipse | |
---|---|
Role | Ultralight aircraft |
National origin | United States |
Manufacturer | Phase 3 Aircraft |
Designer | Bruce Emmons |
Introduction | 1983 |
Status | Production completed |
The Phase 3 Eclipse is an American ultralight aircraft that was designed by Bruce Emmons and produced by Phase 3 Aircraft. The aircraft was supplied as a kit for amateur construction. [1] [2]
The aircraft was designed to comply with the US FAR 103 Ultralight Vehicles rules, including the category's maximum empty weight of 254 lb (115 kg). The aircraft has a standard empty weight of 165 lb (75 kg). It features a cantilever high-wing, inverted V-tail, a single-seat, open cockpit, tricycle landing gear and a single engine in pusher configuration. [1] [2]
The aircraft is made from bolted-together aluminum tubing, with the flying surfaces covered in double surface Dacron sailcloth. Its elliptical planform 32.2 ft (9.8 m) span wing it mounted using several cabane struts and produces a 15:1 glide ratio. The pilot sits on an open-air seat, without a windshield. The control system is unusual in that roll control is by cable-actuated wing warping. All three landing gear wheels have suspension and the nosewheel is steerable. The 25 hp (19 kW) KFM 107 powerplant is mounted behind the pilot's seat, with the propeller in between the upper and lower tailboom tubes. The design was proof-tested to +9/-9 g. The aircraft exhibits good stability in all axes in flight and can be quickly dismantled for storage or ground transport. The wing is removed with three bolts. [1] [2]
The design was introduced just before the ultralight market in the US became saturated in 1984, as such it such never became a commercial success. Only a small number were completed. [1]
Data fromCliche and Virtual Ultralight Museum. [1] [2]
General characteristics
Performance
The Airborne Avenger is an American ultralight aircraft that was designed and produced by Airborne Wing Design in the early 1980s. The aircraft was supplied as a kit for amateur construction.
The Robertson B1-RD is an American ultralight aircraft that was designed by Glen Bashforth and Bruce Bashforth and produced by the Robertson Aircraft Corporation. The aircraft was supplied as a kit for amateur construction with production starting in June 1982.
The International Ultralight Banchee is an American ultralight aircraft designed by Brian Jensen, Gil Kinzie and Nick Nichols and produced by International Ultralight Aviation. The aircraft was supplied as a kit for amateur construction.
The Aircore Cadet is an American ultralight aircraft that was designed by Jim Scott and produced by Aircore Industries in the early 1980s. The aircraft was supplied as a kit for amateur construction.
The Cloudbuster Ultralights Cloudbuster is an American ultralight aircraft that was designed and produced by the Cloudbuster Ultralights Company of Sarasota, Florida in the early 1980s. The aircraft was supplied as a kit for amateur construction.
The Seahawk Condor is an American ultralight aircraft that was designed by Buddy Head, Bob Carswell and Dave French and produced by Seahawk Industries and later by Condor Aircraft. The aircraft was supplied as a kit for amateur construction.
The Striplin F.L.A.C. is an American flying wing ultralight aircraft that was designed by Ken Striplin in 1977, first flying in October 1978. The aircraft was supplied as a kit for amateur construction.
The Cascade Kasperwing I-80 is an American ultralight flying wing motorglider that was designed by Witold Kasper and Steve Grossruck. It was produced by Cascade Ultralites and introduced in 1976. The aircraft was supplied as a kit for amateur construction.
The Manta Foxbat is an American ultralight aircraft that was designed by Bill Armour and produced by Manta Products Inc of Oakland, California. The aircraft was supplied as a kit for amateur construction.
The Chandelle Mk IV is an American ultralight aircraft that was designed by Nile Downer and produced by Chandelle Aircraft. The aircraft was supplied as a kit for amateur construction.
The Bell Sidewinder is an American ultralight aircraft, supplied as a kit for amateur construction.
The Worldwide Ultralite Spitfire is an American ultralight aircraft that was designed by Fred Bell and manufactured by Worldwide Ultralite Industries and later by Don Ecker and Air Magic Ultralights of Houston, Texas. The aircraft was supplied as a kit for amateur construction.
The Skye Treck Skyseeker is a Canadian ultralight aircraft that was designed and produced by Skye Treck of Manitoba. The aircraft was supplied as a kit for amateur construction.
The Star Flight Starfire is the first aircraft in a large family of American ultralight aircraft that was designed by Dick Turner and produced by Star Flight Manufacturing, introduced in 1979. The aircraft were all supplied as kits for amateur construction.
The Swallow Aeroplane Company Swallow is a series of American ultralight aircraft that was designed by Chet Fudge and produced by the Swallow Aeroplane Company in the 1980s. The aircraft was supplied as a kit for amateur construction.
The Teratorn T/A is an American ultralight aircraft that was designed and produced by Teratorn Aircraft. The aircraft was supplied as a kit for amateur construction.
The Thor T/A is a Canadian ultralight aircraft that was designed by Thorsten B. Strenger and produced by Thor Air of Weston, Ontario. The aircraft was supplied as a kit for amateur construction.
The Pinaire Ultra-Aire is an American ultralight aircraft that was designed and produced by Pinaire Engineering. The aircraft was supplied as a kit for amateur construction.
The Diehl AeroNautical XTC Hydrolight is an American amphibious flying boat ultralight aircraft that was designed and produced by Diehl AeroNautical in the 1980s.
The North Wing ATF is an American single-seat ultralight trike designed and produced by North Wing Design of East Wenatchee, Washington. The aircraft is supplied as a kit for amateur construction.