Pizza layout

Last updated
H0e scale Pizza Layout 07.jpg
H0e scale

A pizza layout is a model railway laid out as a circle of the smallest workable radius of curve, on the smallest possible square or circular baseboard. This baseboard can be so small as to look as if it would fit into a pizza box, hence the name. [1] [2] [3]

Contents

Pizza layouts are not serious scale models, but are to provide a little humour. Despite their simplicity, they are rarely built by beginners but are usually light relief for an experienced modeller. As they are quick to build and lower budget they are often used as a theme for exhibitions and contests. [4] Many are also seasonally themed, such as Christmas layouts. They often provide an opportunity to experiment with a different gauge and scale from a modeller's regular.

A more sophisticated pizza layout in O9 gauge, with highly detailed scenery Mini Layout01.jpg
A more sophisticated pizza layout in O9 gauge, with highly detailed scenery

Building this minimum-size layout requires a small gauge. Most pizzas use 9mm gauge, as for N gauge. [5] Z gauge [6] and the esoteric smaller gauges would be useful too, but their costs are more than 9mm and there are fewer options available. Other gauges up to the popular H0/OO 16.5mm gauge are also used, [2] but almost only as narrow gauge models.

Most pizzas model narrow gauge railways. This combines the narrow physical gauge needed with a larger and more visible scale. Narrow gauge prototypes also have short wheelbases, slow running speeds and so are often more accepting of tight curve radii. Where standard gauge is modelled, this is only for N, Z or smaller gauges, [2] H0 requiring a size greater than the usual 'pizza' format, [2] although this can just be achieved in 2' diameter. [7]

For an 00-9 or H0e pizza, using 9mm gauge and either 4mm or 3.5mm scale, a workable minimum curve radius is 6", for an overall baseboard diameter of 15 inches (380 mm), within the pizza box format. [3] Some model companies, such as Tomix, even produce extra-small radius curves of 4" radius, for modelling trams. These have been used to model at N gauge within a 9" baseboard. [6]

Gn15 gauge models one of the smallest prototypical gauges, 15 inch minimum gauge railways. This gives the greatest combination of small curve radius and largest scale. [8]

Nn3 Z gauge [9] Z gauge has even been used to make layouts inside a large glass bottle. [10]

The layout is a simple circular loop. Points are limited to just one, perhaps two, small sidings and these are more decorative than useful for shunting. A siding to the outside of the loop [2] requires a larger baseboard. A siding inside the loop may do so too: the siding's radius must be smaller than that of the running loop, which is already close to the minimum radius. [9] Allowing the loop to be a little larger, so as to permit a tighter siding curve within it, means a larger loop and baseboard. This can be done most compactly by stretching the circular loop to an oval, but keeping the same radius with an added straight; the point comes off the straight portion. In rare cases, a fiddle yard has been incorporated into a hidden part of the layout. [11]

Although rare, some pizza layouts have also used multi-level spiral layouts, with something of the rabbit warren to them. [12]

Scenery

Scenery may be realistic, a caricature of geography containing real buildings or deliberately unrealistic. [13] The difficulty is the likelihood that all of the layout can be seen at once, and the problem of finding any sort of visual break between the two sides. Many simply ignore this, placing a realistic building or feature in the centre and ignoring the logical pointlessness of a railway that obviously circles without going anywhere. [1] Some layouts model funfairs, where the short circle can appear purposeful. A popular approach is to place a large visual break in the centre of the layout, such as a hill or quarry working. This has the advantage of stopping the layout look so obviously a loop, but at the risk of looking like a wedding cake with an arbitrary hill in the middle. [14] Many alpine or mining layouts have hidden half of the loop beneath tunnels. [11]

See also

Related Research Articles

<span class="mw-page-title-main">Rail transport modelling</span> Modeling trains hobby

Railway modelling or model railroading is a hobby in which rail transport systems are modelled at a reduced scale.

<span class="mw-page-title-main">OO gauge</span> Model railroad gauge

OO gauge or OO scale is the most popular standard-gauge model railway standard in the United Kingdom, outside of which it is virtually unknown. OO gauge is one of several 4 mm-scale standards, and the only one to be marketed by major manufacturers. The OO track gauge of 16.5 mm corresponds to prototypical gauge of 4 ft 1+12 in, rather than 4 ft 8+12 in standard gauge. However, since the 1960s, other gauges in the same scale have arisen—18.2 mm (EM) and 18.83 mm (Scalefour)—to reflect the desire of some modellers for greater scale accuracy.

<span class="mw-page-title-main">Track gauge</span> Spacing of the rails on a railway track

In rail transport, track gauge is the distance between the two rails of a railway track. All vehicles on a rail network must have wheelsets that are compatible with the track gauge. Since many different track gauges exist worldwide, gauge differences often present a barrier to wider operation on railway networks.

<span class="mw-page-title-main">O scale</span> Model railroad gauge

O scale is a scale commonly used for toy trains and rail transport modelling. Introduced by German toy manufacturer Märklin around 1900, by the 1930s three-rail alternating current O gauge was the most common model railroad scale in the United States and remained so until the early 1960s. In Europe, its popularity declined before World War II due to the introduction of smaller scales.

<span class="mw-page-title-main">HO scale</span> Model railroad scale of 1:87 (3.5 mm:1 ft)

HO or H0 is a rail transport modelling scale using a 1:87 scale. It is the most popular scale of model railway in the world. The rails are spaced 16.5 millimetres (0.650 in) apart for modelling 1,435 mm standard gauge tracks and trains in HO.

<span class="mw-page-title-main">N scale</span>

N scale is a popular model railway scale. Depending upon the manufacturer, the scale ranges from 1:148 to 1:160. In all cases, the gauge is 9 mm or 0.354 in. The term N gauge refers to the track dimensions, but in the United Kingdom in particular British N gauge refers to a 1:148 scale with 1:160 track gauge modelling. The terms N scale and N gauge are often inaccurately used interchangeably, as scale is defined as ratio or proportion of the model, and gauge only as a distance between rails. The scale 1:148 defines the rail-to-rail gauge equal to 9 mm exactly, so when calculating the rail or track use 1:160 and for engines and car wheel base use 1:148.

<span class="mw-page-title-main">2 mm scale</span> Railway modeling finecast scale

2 mm scale, often 2 mm finescale is a specification used for railway modelling, largely for modelling British railway prototypes. It uses a scale of 2 mm on the model to 1 foot on the prototype, which scales out to 1:152. The track gauge used to represent prototype standard gauge is 9.42 mm. Track and wheels are closer to dead scale replicas than commercial British N.

<span class="mw-page-title-main">TT scale</span>

TT scale is a model railroading scale, whose name stands for table top.

Z scale is one of the smallest commercially available model railway scales (1:220), with a track gauge of 6.5 mm / 0.256 in. Introduced by Märklin in 1972, Z scale trains operate on 0–10 volts DC and offer the same operating characteristics as all other two-rail, direct-current, analog model railways. Locomotives can be fitted with digital decoders for independent control. Model trains, track, structures, and human/animal figures are readily available in European, North American, and Japanese styles from a variety of manufacturers.

<span class="mw-page-title-main">Garden railway</span> Model railway system

A garden railroad or garden railway is a model railway system set up outdoors in a garden. While G is the most popular scale for garden railroads, 16 mm scale has a dedicated and growing following especially in the UK. Model locomotives in this scale are often live steam scale models of British narrow gauge prototypes. 16 mm scale track, the same gauge as O gauge is probably now more popular in the UK than G scale.

<span class="mw-page-title-main">Live steam</span> Steam-powered models and toys

Live steam is steam under pressure, obtained by heating water in a boiler. The steam is used to operate stationary or moving equipment.

<span class="mw-page-title-main">Peco</span>

PECO is a UK-based manufacturer of model railway accessories, especially trackwork, based at Pecorama, Beer in South Devon, England.

<span class="mw-page-title-main">Minimum-gauge railway</span>

Minimum-gauge railways have a gauge of most commonly 15 in, 400 mm, 16 in, 18 in, 19 in, 500 mm or 20 in. The notion of minimum-gauge railways was originally developed by estate railways and the French company of Decauville for light railways, trench railways, mining, and farming applications.

<span class="mw-page-title-main">T gauge</span>

T gauge is a model railway scale with a track gauge of 3 mm, referred from "Three-millimeter gauge" or "Third of N scale". It was introduced at the Tokyo Toy Show in 2006 by KK Eishindo of Japan, and went on sale in 2007. It is the smallest commercial model train scale in the world. Since mid-2009, Railway Shop is the exclusive licensed manufacturer.

<span class="mw-page-title-main">Track gauge conversion</span> Change of rail tracks or rail vehicles to a different gauge

Gauge conversion is the changing of one railway track gauge to another.

<span class="mw-page-title-main">On2 gauge</span>

On2 gauge is part of the hobby of rail transport modeling. The name is based on the common USA model railroad O scale of 1:48 and refers to the gauge between the rails and the fact that it is narrow gauge, thus 'On2'.

<span class="mw-page-title-main">Minimum railway curve radius</span> Shortest allowable design radius for the centerline of railway tracks

The minimum railway curve radius is the shortest allowable design radius for the centerline of railway tracks under a particular set of conditions. It has an important bearing on construction costs and operating costs and, in combination with superelevation in the case of train tracks, determines the maximum safe speed of a curve. The minimum radius of a curve is one parameter in the design of railway vehicles as well as trams; monorails and automated guideways are also subject to a minimum radius.

<span class="mw-page-title-main">Minories (model railway)</span> Design for a model railway layout

Minories is a 'deceptively simple' design for a model railway layout, designed by C. J. Freezer. The design was first published in Railway Modeller in 1957 and it became a regular of Peco's many collected plans books afterwards. It is notable as an influential design, more than as a single instance of the model. The design was an attempt to model an interesting urban passenger terminus in the minimum space, allowing much opportunity for operating trains, rather than scenic modelling. Freezer was the editor of Railway Modeller and Minories, with its developments, made regular appearances throughout the years.

<span class="mw-page-title-main">Rabbit warren layout</span> Model railway layout

A rabbit warren layout is a model railway layout. A group of designs, more than a single constructed layout, rabbit warrens provide a humorous display of continuously moving trains that appear to pop in and out of tunnels, seemingly randomly.

References

    1. 1 2 Carl Arendt (1 April 2010). "Pizza Party". p. 96.
    2. 1 2 3 4 5 Carl Arendt (15 November 2008). "Pizza Party". p. 79a.
    3. 1 2 "Model Railway in a Pizza Box". Mendocino Coast Model Railroad and Historical Society.
    4. "Pizza Layouts". Greenwich and District Narrow Gauge Railway Society.
    5. Carl Arendt (10 January 2013). "Stony Brook". p. 112.
    6. 1 2 Carl Arendt (15 April 2007). "Pizza Parade". p. 60a.
    7. "Pizza Layout". Westport Terminal. Oct 2005.
    8. Carl Arendt (1 November 2011). "Pizza Is Built On A Lazy Susan". p. 107.
    9. 1 2 "The "Pizza" Layout".
    10. Carl Arendt (1 December 2012). "Pizza in a Bottle". p. 111.
    11. 1 2 Carl Arendt (2006). "Pizza Pizzaz". p. 49.
    12. ""Pizza Hill" N-scale Model Train Layout".
    13. Carl Arendt (9 April 2015). "A Rural Railway in France". p. 117.
    14. Günther Kiltz (1 July 2014). "The Gynthrolith Mine". Carl Arendt. p. 116.