Positive (photography)

Last updated

Positive has multiple meanings in the world of photography. The two main definitions of positive photography include positive space and positive film.

Contents

Positive space

Positive space is the idea that any part of a photo that includes the subject, stands out from the rest of the photo. It is key component in most photographs that helps convey emotions towards an audience. The technique can illustrate emotions ranging from crowdedness, to power, to chaos, or even to movement in a photo. Positive photos often busy and active so that most of the focus is drawn towards the subject. It is important to note that positive space in photography is usually balanced with negative space to make an appealing composition. For example, if a photo is over-crowded and it is hard to distinguish what is and is not the subject of the photo (meaning there is a lack of definition or negative space, or there's too much negative space), then the photo may not be compositionally well thought out or perhaps fits a different style of photography like abstract.

Example of positive photography: The jet and clouds crowd most of the image, removing most of the negative space, like the sky and Earth. Jet and clouds.jpg
Example of positive photography: The jet and clouds crowd most of the image, removing most of the negative space, like the sky and Earth.
Example of positive photography: The leaves and stem are the subject of the photo and occupy most of the space. Leaves and stem.jpg
Example of positive photography: The leaves and stem are the subject of the photo and occupy most of the space.

Positive film

Positive film, which is used to develop photos (slides) that would go into a slide projector, is also known as “reversal,” “slide,” or “transparency” film. It is a film or paper record of a scene that represents the color and luminance of objects in that scene with the same colors and luminance (as near as the medium will allow). Color transparencies are an example of positive photography: the range of colors presented in the medium is limited by the tonal range of the original image (dark and light areas correspond).

It is opposed to a negative where colors and luminance are reversed: this is due to the chemical or electrical processes involved in recording the scene. Positives can be turned into negatives by appropriate chemical or electronic processes. Often, with the use of digital imaging, computers can automatically complete this process. Using E-6 chemicals for processing these transparent photos and combining them with C-41 chemicals, a process known as cross processing results in highly saturated and vivid photos with different colors and brightness each time the process is done.

History

When film was first made (mid-19th century), it used silver-plated copper sheets that contained three layers with light sensitive chemicals on them. Other items used to create film included leather, paper, and glass sheets. Glass sheets were the most popular due being cheaper and more opaque than plastic sheets. By 1895 “safety film” became the new norm as it was flexible and roll-able unlike the copper and glass sheets, and it was safer than nitrate film; however, it would take until the 1930s for the modern color subtract film and positive film to finally develop. Even then, the film produced images that were too dark in color and would take an additional six years for Kodachrome, a film produced by Kodak that used color subtraction methods, to lighten the colors and film for more suitable images. Gradually over time, the process and chemicals used for the processes to make positive photography became refined and better in terms of detail, resolution, lighting, and color.

Related Research Articles

<span class="mw-page-title-main">Photography</span> Creating images by recording light

Photography is the art, application, and practice of creating durable images by recording light, either electronically by means of an image sensor, or chemically by means of a light-sensitive material such as photographic film. It is employed in many fields of science, manufacturing, and business, as well as its more direct uses for art, film and video production, recreational purposes, hobby, and mass communication.

<span class="mw-page-title-main">Photograph</span> Image created by light falling on a light-sensitive surface

A photograph is an image created by light falling on a photosensitive surface, usually photographic film or an electronic image sensor, such as a CCD or a CMOS chip. Most photographs are now created using a smartphone/camera, which uses a lens to focus the scene's visible wavelengths of light into a reproduction of what the human eye would see. The process and practice of creating such images is called photography.

<span class="mw-page-title-main">Exposure (photography)</span> Amount of light captured by a camera

In photography, exposure is the amount of light per unit area reaching a frame of photographic film or the surface of an electronic image sensor, as determined by shutter speed, lens F-number, and scene luminance. Exposure is measured in lux seconds, and can be computed from exposure value (EV) and scene luminance in a specified region.

<span class="mw-page-title-main">Autochrome Lumière</span> Early color photography process

The Autochrome Lumière was an early color photography process patented in 1903 by the Lumière brothers in France and first marketed in 1907. Autochrome was an additive color "mosaic screen plate" process. It was the principal color photography process in use before the advent of subtractive color film in the mid-1930s.

<span class="mw-page-title-main">Multi-exposure HDR capture</span> Technique to capture HDR images and videos

In photography and videography, multi-exposure HDR capture is a technique that creates extended or high dynamic range (HDR) images by taking and combining multiple exposures of the same subject matter at different exposure levels. Combining multiple images in this way results in an image with a greater dynamic range than what would be possible by taking one single image. The technique can also be used to capture video by taking and combining multiple exposures for each frame of the video. The term "HDR" is used frequently to refer to the process of creating HDR images from multiple exposures. Many smartphones have an automated HDR feature that relies on computational imaging techniques to capture and combine multiple exposures.

<span class="mw-page-title-main">Kodachrome</span> Brand name of an Eastman Kodak film

Kodachrome is the brand name for a color reversal film introduced by Eastman Kodak in 1935. It was one of the first successful color materials and was used for both cinematography and still photography. For many years, Kodachrome was widely used for professional color photography, especially for images intended for publication in print media.

<span class="mw-page-title-main">Reversal film</span> Type of photographic film that produces a positive image on a transparent base

In photography, reversal film or slide film is a type of photographic film that produces a positive image on a transparent base. Instead of negatives and prints, reversal film is processed to produce transparencies or diapositives. Reversal film is produced in various sizes, from 35 mm to roll film to 8×10 inch sheet film.

<span class="mw-page-title-main">E-6 process</span> Chromogenic photographic process

The E-6 process is a chromogenic photographic process for developing Ektachrome, Fujichrome and other color reversal photographic film.

<span class="mw-page-title-main">Negative (photography)</span> Image on photographic film

In photography, a negative is an image, usually on a strip or sheet of transparent plastic film, in which the lightest areas of the photographed subject appear darkest and the darkest areas appear lightest. This reversed order occurs because the extremely light-sensitive chemicals a camera film must use to capture an image quickly enough for ordinary picture-taking are darkened, rather than bleached, by exposure to light and subsequent photographic processing.

<span class="mw-page-title-main">Darkroom</span> Room which can be made fully dark to allow for development of photographs and film

A darkroom is used to process photographic film, to make prints and to carry out other associated tasks. It is a room that can be made completely dark to allow the processing of the light-sensitive photographic materials, including film and photographic paper. Various equipment is used in the darkroom, including an enlarger, baths containing chemicals, and running water.

<span class="mw-page-title-main">Color photography</span> Photography that reproduces colors

Color photography is photography that uses media capable of capturing and reproducing colors. By contrast, black-and-white or gray-monochrome photography records only a single channel of luminance (brightness) and uses media capable only of showing shades of gray.

<span class="mw-page-title-main">Contact print</span> Photographic image produced directly from film

A contact print is a photographic image produced from film; sometimes from a film negative, and sometimes from a film positive or paper negative. In a darkroom an exposed and developed piece of film or photographic paper is placed emulsion side down, in contact with a piece of photographic paper, light is briefly shone through the negative or paper and then the paper is developed to reveal the final print.

<span class="mw-page-title-main">Instant film</span> Photographic film which develops in minutes

Instant film is a type of photographic film that was introduced by Polaroid Corporation to produce a visible image within minutes or seconds of the photograph's exposure. The film contains the chemicals needed for developing and fixing the photograph, and the camera exposes and initiates the developing process after a photo has been taken.

The science of photography is the use of chemistry and physics in all aspects of photography. This applies to the camera, its lenses, physical operation of the camera, electronic camera internals, and the process of developing film in order to take and develop pictures properly.

<span class="mw-page-title-main">Tone mapping</span> Image processing technique

Tone mapping is a technique used in image processing and computer graphics to map one set of colors to another to approximate the appearance of high-dynamic-range images in a medium that has a more limited dynamic range. Print-outs, CRT or LCD monitors, and projectors all have a limited dynamic range that is inadequate to reproduce the full range of light intensities present in natural scenes. Tone mapping addresses the problem of strong contrast reduction from the scene radiance to the displayable range while preserving the image details and color appearance important to appreciate the original scene content.

The conservation and restoration of photographs is the study of the physical care and treatment of photographic materials. It covers both efforts undertaken by photograph conservators, librarians, archivists, and museum curators who manage photograph collections at a variety of cultural heritage institutions, as well as steps taken to preserve collections of personal and family photographs. It is an umbrella term that includes both preventative preservation activities such as environmental control and conservation techniques that involve treating individual items. Both preservation and conservation require an in-depth understanding of how photographs are made, and the causes and prevention of deterioration. Conservator-restorers use this knowledge to treat photographic materials, stabilizing them from further deterioration, and sometimes restoring them for aesthetic purposes.

A chromogenic print, also known as a C-print or C-type print, a silver halide print, or a dye coupler print, is a photographic print made from a color negative, transparency or digital image, and developed using a chromogenic process. They are composed of three layers of gelatin, each containing an emulsion of silver halide, which is used as a light-sensitive material, and a different dye coupler of subtractive color which together, when developed, form a full-color image.

<span class="mw-page-title-main">Analog photography</span> Non-digital photography that uses film or chemical emulsions

Analog photography, known as film photography, is an incorrect term for photography that uses chemical processes to capture an image, typically on paper, film or a hard plate. Analog is a word used to define what a video signal was before digital came along. These photographic processes were the only methods available to photographers for more than a century prior to the invention of digital photography, which uses electronic sensors to record images to digital media.

<span class="mw-page-title-main">Monochrome photography</span> Photography in which every point in the image has the same hue but different intensity

Monochrome photography is photography where each position on an image can record and show a different amount of light, but not a different hue. It includes all forms of black-and-white photography, which produce images containing shades of neutral grey ranging from black to white. Other hues besides grey, such as sepia, cyan, blue, or brown can also be used in monochrome photography. In the contemporary world, monochrome photography is mostly used for artistic purposes and certain technical imaging applications, rather than for visually accurate reproduction of scenes.

<span class="mw-page-title-main">Photographic film</span> Film used by film (analog) cameras

Photographic film is a strip or sheet of transparent film base coated on one side with a gelatin emulsion containing microscopically small light-sensitive silver halide crystals. The sizes and other characteristics of the crystals determine the sensitivity, contrast, and resolution of the film.

References

Photography Life, Learn Pro Photography, Lomography, Photography History Facts, Image of leaves, Image of Jet