Precision railroading

Last updated
Precision railroading attempts to minimize the number of times on each journey a freight car must be sorted in classification yards such as this one in Fort Worth, Texas. Union Pacific Davidson Yard in Fort Worth.jpg
Precision railroading attempts to minimize the number of times on each journey a freight car must be sorted in classification yards such as this one in Fort Worth, Texas.

Precision railroading or precision scheduled railroading (PSR) is a concept in freight railroad operations pioneered by E. Hunter Harrison in 1993, and adopted by nearly every North American Class I railroad. It shifts the focus from older practices, such as unit trains, hub and spoke operations, and individual car switching at hump yards to emphasizing point-to-point freight car movements on simplified routing networks. Under PSR, freight trains operate on fixed schedules, much like passenger trains, instead of being dispatched whenever a sufficient number of loaded cars are available. In the past, intermodal trains and general merchandise trains operated separately; under PSR they are combined as needed, typically with distributed power. Inventories of freight cars and locomotives are reduced and fewer workers are employed for a given level of traffic. The result is an often substantial decrease in railroad operating ratios and other financial and operating metrics at the cost of less-reliable service (particularly to smaller customers), long-term capacity issues, and possibly increased derailments and other safety risks associated with longer trains and crew fatigue. [1]

Contents

History

Harrison first introduced PSR at the Illinois Central Railroad (IC), where he became CEO in 1993. He implemented it at Canadian National after they acquired IC in 1998. After retiring from Canadian National, Harrison was recruited to take over leadership of the Canadian Pacific and implemented precision railroading there. In March 2017, he was appointed CEO of CSX Transportation and began implementing PSR on its large network, but he died eight months later.

Criticism

Precision railroading has been criticized on many fronts. Shippers complain about poorer service and delays. [2] Railroad workers have raised concerns about safety due to reduced inspections and staffing. [3] Under PSR, service is typically eliminated on shipping lanes and origin-destination pairs that have low traffic levels. Intermodal terminals have been consolidated, with the railroad relying on trucks for the last hundred miles. [4] Fewer workers are needed, even with higher traffic volumes. [5] As a result, over 20,000 railroad workers were laid off in 2019. [6] The Surface Transportation Board estimates large freight carriers employed 30% fewer workers in 2022 as compared to 2018. [7]

PSR advocates claim that shippers benefit in the long run from reduced costs and more reliable schedules. However, PSR has been criticized as being focused on short-term financial benefits at the expense of long-term capacity. [8] [9] [10] In particular, Precision Scheduled Railroading is impacting safety due to increased train length, up to three miles (5,000 metres) in many cases. This leads to a higher risk of derailments as well as crew stress and fatigue due to the difficulty of operating trains of this length, for which the North American railroad network was not necessarily designed. [11]

Related Research Articles

<span class="mw-page-title-main">Canadian Pacific Railway</span> Class I railroad in Canada and the United States

The Canadian Pacific Railway, also known simply as CPR or Canadian Pacific and formerly as CP Rail (1968–1996), was a Canadian Class I railway incorporated in 1881. The railway was owned by Canadian Pacific Railway Limited, which began operations as legal owner in a corporate restructuring in 2001.

<span class="mw-page-title-main">Train</span> Series of powered rail vehicles

A train is a series of connected vehicles that run along a railway track and transport people or freight. Trains are typically pulled or pushed by locomotives or railcars, though some are self-propelled, such as multiple units. Passengers and cargo are carried in railroad cars, also known as wagons. Trains are designed to a certain gauge, or distance between rails. Most trains operate on steel tracks with steel wheels, the low friction of which makes them more efficient than other forms of transport.

<span class="mw-page-title-main">Union Pacific Railroad</span> Class I freight railroad in the United States

The Union Pacific Railroad is a Class I freight-hauling railroad that operates 8,300 locomotives over 32,200 miles (51,800 km) routes in 23 U.S. states west of Chicago and New Orleans. Union Pacific is the second largest railroad in the United States after BNSF, with which it shares a duopoly on transcontinental freight rail lines in the Western, Midwestern and West South Central United States.

<span class="mw-page-title-main">Canadian National Railway</span> Canadian Class I freight railway company

The Canadian National Railway Company is a Canadian Class I freight railway headquartered in Montreal, Quebec, which serves Canada and the Midwestern and Southern United States.

<span class="mw-page-title-main">BNSF Railway</span> American freight railroad

BNSF Railway is the largest freight railroad in the United States. One of six North American Class I railroads, BNSF has 36,000 employees, 33,400 miles (53,800 km) of track in 28 states, and over 8,000 locomotives. It has three transcontinental routes that provide rail connections between the western and eastern United States. BNSF trains traveled over 169 million miles in 2010, more than any other North American railroad.

<span class="mw-page-title-main">CSX Transportation</span> Class I railroad system in the US

CSX Transportation, known colloquially as simply CSX, is a Class I freight railroad company operating in the Eastern United States and the Canadian provinces of Ontario and Quebec. Operating about 21,000 route miles (34,000 km) of track, it is the leading subsidiary of CSX Corporation, a Fortune 500 company headquartered in Jacksonville, Florida.

<span class="mw-page-title-main">Norfolk Southern Railway</span> American railway company

The Norfolk Southern Railway is a Class I freight railroad operating in the Eastern United States. Headquartered in Atlanta, the company was formed in 1982 with the merger of the Norfolk and Western Railway and Southern Railway. The company operates 19,420 route miles (31,250 km) in 22 eastern states, the District of Columbia, and has rights in Canada over the Albany to Montreal route of the Canadian Pacific Kansas City. Norfolk Southern Railway is the leading subsidiary of the Norfolk Southern Corporation.

<span class="mw-page-title-main">Stock car (rail)</span> Rolling stock used for carrying livestock on railways

In railroad terminology, a stock car or cattle car is a type of rolling stock used for carrying livestock to market. A traditional stock car resembles a boxcar with louvered instead of solid car sides for the purpose of providing ventilation; stock cars can be single-level for large animals such as cattle or horses, or they can have two or three levels for smaller animals such as sheep, pigs, and poultry. Specialized types of stock cars have been built to haul live fish and shellfish and circus animals such as camels and elephants. Until the 1880s, when the Mather Stock Car Company and others introduced "more humane" stock cars, death rates could be quite high as the animals were hauled over long distances. Improved technology and faster shipping times have greatly reduced deaths.

<span class="mw-page-title-main">Siding (rail)</span> Type of railway track

A siding, in rail terminology, is a low-speed track section distinct from a running line or through route such as a main line, branch line, or spur. It may connect to through track or to other sidings at either end. Sidings often have lighter rails, meant for lower speed or less heavy traffic, and few, if any, signals. Sidings connected at both ends to a running line are commonly known as loops; those not so connected may be referred to as single-ended or dead-end sidings, or stubs.

<span class="mw-page-title-main">Pan Am Railways</span> American transportation company

Pan Am Railways, Inc. (PAR) is a subsidiary of CSX Corporation that operates Class II regional railroads covering northern New England from Mattawamkeag, Maine, to Rotterdam Junction, New York. Pan Am Railways is primarily made up of former Class II regional railroads such as Boston and Maine Corporation, Maine Central Railroad Company, Portland Terminal Company, and Springfield Terminal Railway Company. It was formerly known as Guilford Transportation Industries and was also known as Guilford Rail System. Guilford bought the name, colors, and logo of Pan American World Airways in 1998.

<span class="mw-page-title-main">Montreal, Maine and Atlantic Railway</span> Former freight railroad in North America

The Montreal, Maine and Atlantic Railway was a Class II freight railroad that operated in the U.S. states of Maine and Vermont and the Canadian province of Quebec between 2002 and 2014. It was headquartered in Hermon, Maine.

<span class="mw-page-title-main">Rail transportation in the United States</span>

Rail transportation in the United States consists primarily of freight shipments along a well integrated network of standard gauge private freight railroads that also extend into Canada and Mexico. The United States has the largest rail transport network of any country in the world, about 160,000 miles (260,000 km).

TTX Company is a provider of railcars and related freight car management services to the North American rail industry. TTX's pool of railcars—over 168,000 cars and intermodal well cars—supports shippers in several industries where flatcars, boxcars and gondolas are required.

<span class="mw-page-title-main">Rail freight transport</span> Practice of transporting cargo by rail

Rail freight transport is the use of railways and trains to transport cargo as opposed to human passengers.

<span class="mw-page-title-main">Central Railroad of Indiana</span>

The Central Railroad Company of Indiana is a Class III short-line railroad that owns 92 miles (148 km) of track between Cincinnati, Ohio, and Shelbyville, Indiana, with trackage rights on CSX to Indianapolis, Indiana. CIND interchanges with CSX, Indiana & Ohio Railway, and Norfolk Southern in Cincinnati, and in North Bend, Ohio, with CSX; an Indiana & Ohio branchline splits from the CIND line at Valley Junction, a railroad location near Hooven, Ohio.

<span class="mw-page-title-main">Positive train control</span> Type of train protection system

Positive train control (PTC) is a family of automatic train protection systems deployed in the United States. Most of the United States' national rail network mileage has a form of PTC. These systems are generally designed to check that trains are moving safely and to stop them when they are not.

<span class="mw-page-title-main">Crescent Corridor</span> Railroad corridor in eastern USA

The Crescent Corridor is a railroad corridor operated by the Norfolk Southern Railway (NS). The project, first proposed in 2007, and scheduled for completion by 2020, spans 13 states from New York to Louisiana. It is a private-public partnership between Norfolk Southern and the various state and federal governments.

The Thermal Belt Railway is a Class III shortline railroad that operates for freight service on an irregular schedule on a former CSX line from Bostic to Forest City and on a former Norfolk Southern line from Forest City to Alexander Mills, North Carolina. Total mileage is 8.5 miles (13.7 km). Connections are made with CSX at Bostic. Rail is 85 pounds.

Urban freight distribution is the system and process by which goods are collected, transported, and distributed within urban environments. The urban freight system can include seaports, airports, manufacturing facilities, and warehouse/distribution centers that are connected by a network of railroads, rail yards, pipelines, highways, and roadways that enable goods to get to their destinations.

References

  1. Schwartz, Dan; Sanders, Topher (April 3, 2023). "The True Dangers of Long Trains". ProPublica. Archived from the original on April 3, 2023. Retrieved April 3, 2023.
  2. Wilner, Frank (9 June 2022). "STB Opts for Transparency Over Fiat". Railway Age. Retrieved 9 June 2022.
  3. Gordon, Aaron (22 March 2021). "'It's Going to End Up Like Boeing': How Freight Rail Is Courting Catastrophe". Vice. Retrieved 23 March 2021.
  4. Ashe, Ari (April 5, 2019). "Jury still out on 'precision' railroading in US". Joc.com.
  5. Stephens, Bill (June 26, 2019). "Impact of Precision Scheduled Railroading shows up in Class I employment figures". Trains Magazine.
  6. Long, Heather (January 3, 2020). "Railroads are slashing workers, cheered on by Wall Street to stay profitable amid Trump's trade war". Washington Post .
  7. "STB Issues Hearing Notice for Urgent Issues in Freight Rail Service". Surface Transportation Board. Retrieved 2022-11-21.
  8. "What is Precision Scheduled Railroading (PSR)?". FreightWaves. January 9, 2020.
  9. "Are We Genuflecting Too Much to Wall Street?". Railway Age. October 23, 2020.
  10. "Why BNSF is bucking the PSR trend and adding logistics centers". Supply Chain Drive.
  11. "It is Getting Worse. People Are Leaving". Railway Age. April 25, 2020.