Publicly owned treatment works

Last updated
The Stickney Water Reclamation Plant, serving metropolitan Chicago, is the largest sewage treatment plant in the world. Stickney Water Reclamation Plant.jpg
The Stickney Water Reclamation Plant, serving metropolitan Chicago, is the largest sewage treatment plant in the world.

A publicly owned treatment works (POTW) is a term used in the United States for a sewage treatment plant owned, and usually operated, by a government agency. In the U.S., POTWs are typically owned by local government agencies, and are usually designed to treat domestic sewage and not industrial wastewater.

The term is used extensively in U.S. water pollution law (i.e. the Clean Water Act), regulations and programs. [1] [2] Many POTWs were established or expanded with grants or low-interest loans from the U.S. Environmental Protection Agency (EPA). [3]

There are over 16,000 POTWs in the U.S., serving 75 percent of the total population. [4] The remainder of the population is served by decentralized or private septic systems. The POTWs treat 32 billion US gallons (120 gigalitres) of wastewater every day. [5] Most POTWs are required to meet national secondary treatment standards. [6] [7]

See also

Related Research Articles

Pollutant Substance or energy damaging to the environment

A pollutant is a substance or energy introduced into the environment that has undesired effects, or adversely affects the usefulness of a resource. A pollutant may cause long- or short-term damage by changing the growth rate of plant or animal species, or by interfering with human amenities, comfort, health, or property values. Some pollutants are biodegradable and therefore will not persist in the environment in the long term. However, the degradation products of some pollutants are themselves polluting such as the products DDE and DDD produced from the degradation of DDT.

Stormwater Water that originates during precipitation events and snow/ice melt

Stormwater, also spelled storm water, is water that originates from rain, including snow and ice melt. Stormwater can soak into the soil (infiltrate), be stored on the land surface in ponds and puddles, evaporate, or contribute to surface runoff. Most runoff is conveyed directly to nearby streams, rivers, or other water bodies without treatment.

Industrial waste Waste produced by industrial activity or manufacturing processes

Industrial waste is the waste produced by industrial activity which includes any material that is rendered useless during a manufacturing process such as that of factories, mills, and mining operations. Types of industrial waste include dirt and gravel, masonry and concrete, scrap metal, oil, solvents, chemicals, scrap lumber, even vegetable matter from restaurants. Industrial waste may be solid, semi-solid or liquid in form. It may be hazardous waste or non-hazardous waste. Industrial waste may pollute the nearby soil or adjacent water bodies, and can contaminate groundwater, lakes, streams, rivers or coastal waters. Industrial waste is often mixed into municipal waste, making accurate assessments difficult. An estimate for the US goes as high as 7.6 billion tons of industrial waste produced annually, as of 2017. Most countries have enacted legislation to deal with the problem of industrial waste, but strictness and compliance regimes vary. Enforcement is always an issue.

Water pollution Contamination of water bodies

Water pollution is the contamination of water bodies, usually as a result of human activities, in such a manner that negatively affects its legitimate uses. Water pollution reduces the ability of the body of water to provide the ecosystem services that it would otherwise provide. Water bodies include for example lakes, rivers, oceans, aquifers, reservoirs and groundwater. Water pollution results when contaminants are introduced into these water bodies. Water pollution can usually be attributed to one of four sources: sewage, industry, agriculture, and urban runoff including stormwater. For example, releasing inadequately treated wastewater into natural waters can lead to degradation of these aquatic ecosystems. Water pollution can also lead to water-borne diseases for people using polluted water for drinking, bathing, washing or irrigation. Supplying clean drinking water is an important ecosystem service provided by some freshwater systems, but approximately 785 million people in the world do not have access to clean drinking water because of pollution.

Clean Water Act 1972 U.S. federal law regulating water pollution

The Clean Water Act (CWA) is the primary federal law in the United States governing water pollution. Its objective is to restore and maintain the chemical, physical, and biological integrity of the nation's waters; recognizing the responsibilities of the states in addressing pollution and providing assistance to states to do so, including funding for publicly owned treatment works for the improvement of wastewater treatment; and maintaining the integrity of wetlands.

Sewage disposal regulation and administration describes the governance of sewage treatment and disposal.

New Source Performance Standards (NSPS) are pollution control standards issued by the United States Environmental Protection Agency (EPA). The term is used in the Clean Air Act Extension of 1970 (CAA) to refer to air pollution emission standards, and in the Clean Water Act (CWA) referring to standards for water pollution discharges of industrial wastewater to surface waters.

Effluent Guidelines are U.S. national standards for wastewater discharges to surface waters and publicly owned treatment works (POTW). The United States Environmental Protection Agency (EPA) issues Effluent Guideline regulations for categories of industrial sources of water pollution under Title III of the Clean Water Act (CWA). The standards are technology-based, i.e. they are based on the performance of treatment and control technologies. Effluent Guidelines are not based on risk or impacts of pollutants upon receiving waters.

Best management practice for water pollution Term used in the United States and Canada to describe a type of water pollution control

Best management practices (BMPs) is a term used in the United States and Canada to describe a type of water pollution control. Historically the term has referred to auxiliary pollution controls in the fields of industrial wastewater control and municipal sewage control, while in stormwater management and wetland management, BMPs may refer to a principal control or treatment technique as well.

Regulation of ship pollution in the United States

In the United States, several federal agencies and laws have some jurisdiction over pollution from ships in U.S. waters. States and local government agencies also have responsibilities for ship-related pollution in some situations.

A conventional pollutant is a term used in the USA to describe a water pollutant that is amenable to treatment by a municipal sewage treatment plant. A basic list of conventional pollutants is defined in the U.S. Clean Water Act. The list has been amended in regulations issued by the Environmental Protection Agency:

A Discharge Monitoring Report (DMR) is a United States regulatory term for a periodic water pollution report prepared by industries, municipalities and other facilities discharging to surface waters. The facilities collect wastewater samples, conduct chemical and/or biological tests of the samples, and submit reports to a state agency or the United States Environmental Protection Agency (EPA). All point source dischargers to ”Waters of the U.S.” must obtain a National Pollution Discharge Elimination System (NPDES) permit from the appropriate agency, and many permittees are required to file DMRs.

An effluent limitation is a United States Clean Water Act standard of performance reflecting a specified level of discharge reduction achievable by the best available technology or related standards for various sources of water pollution. These sources include all industries, businesses, municipal sewage treatment plants and storm sewer systems, and other facilities that discharge to surface waters. Effluent limitations are implemented in discharge permits issued by the Environmental Protection Agency (EPA) and state agencies, through the National Pollutant Discharge Elimination System (NPDES).

Water quality law

Water quality laws govern the protection of water resources for human health and the environment. Water quality laws are legal standards or requirements governing water quality, that is, the concentrations of water pollutants in some regulated volume of water. Such standards are generally expressed as levels of a specific water pollutants that are deemed acceptable in the water volume, and are generally designed relative to the water's intended use - whether for human consumption, industrial or domestic use, recreation, or as aquatic habitat. Additionally, these laws provide regulations on the alteration of the chemical, physical, radiological, and biological characteristics of water resources. Regulatory efforts may include identifying and categorizing water pollutants, dictating acceptable pollutant concentrations in water resources, and limiting pollutant discharges from effluent sources. Regulatory areas include sewage treatment and disposal, industrial and agricultural waste water management, and control of surface runoff from construction sites and urban environments. Water quality laws provides the foundation for regulations in water standards, monitoring, required inspections and permits, and enforcement. These laws may be modified to meet current needs and priorities.

Water pollution in the United States Overview of water pollution in the United States of America

Water pollution in the United States is a growing problem that became critical in the 19th century with the development of mechanized agriculture, mining, and industry, although laws and regulations introduced in the late 20th century have improved water quality in many water bodies. Extensive industrialization and rapid urban growth exacerbated water pollution as a lack of regulation allowed for discharges of sewage, toxic chemicals, nutrients and other pollutants into surface water.

United States regulation of point source water pollution Overview of the regulation of point source water pollution in the United States of America

Point source water pollution comes from discrete conveyances and alters the chemical, biological, and physical characteristics of water. In the United States, it is largely regulated by the Clean Water Act (CWA). Among other things, the Act requires dischargers to obtain a National Pollutant Discharge Elimination System (NPDES) permit to legally discharge pollutants into a water body. However, point source pollution remains an issue in some water bodies, due to some limitations of the Act. Consequently, other regulatory approaches have emerged, such as water quality trading and voluntary community-level efforts.

A marine sanitation device (MSD) is a piece of machinery or a mechanical system that is dedicated to treat, process, and/or store raw, untreated sewage that can accumulate onboard water vessels. It does not refer to portable devices such as portable toilets.

Industrial stormwater is runoff from precipitation that lands on industrial sites. This runoff is often polluted by materials that are handled or stored on the sites, and the facilities are subject to regulations to control the discharges.

Clean Boating Act of 2008 United States law

The Clean Boating Act of 2008 (CBA) is a United States law that requires recreational vessels to implement best management practices to control pollution discharges. The law exempts these vessels from requirements to obtain a discharge permit under the Clean Water Act.

County of Maui v. Hawaii Wildlife Fund, No. 18-260, 590 U.S. ___ (2020), was a United States Supreme Court case involving pollution discharges under the Clean Water Act (CWA). The case asked whether the Clean Water Act requires a permit when pollutants that originate from a non-point source can be traced to reach navigable waters through mechanisms such as groundwater transport. In a 6–3 decision, the Court ruled that such non-point discharges require a permit when they are the "functional equivalent of a direct discharge", a new test defined by the ruling. The decision vacated the ruling of the United States Court of Appeals for the Ninth Circuit, and remanded the case with instructions to apply the new standard to the lower courts with cooperation of the Environmental Protection Agency (EPA).

References

  1. United States. Clean Water Act (CWA), Titles II and VI. 33 U.S.C.   § 1281, 33 U.S.C.   § 1381.
  2. "National Pretreatment Program". National Pollutant Discharge Elimination System (NPDES). Washington, D.C.: U.S. Environmental Protection Agency (EPA). 2019-11-05.
  3. Copeland, Claudia (2016-10-18). Clean Water Act: A Summary of the Law (PDF) (Report). Washington, D.C.: U.S. Congressional Research Service. pp. 4–5. RL30030.
  4. "Water and Wastewater Systems Sector". Critical Infrastructure Sectors. Washington, D.C.: U.S. Department of Homeland Security. 2016-01-08.
  5. "Basic Information about Water Security". Water Security. EPA. 2014-02-11. Archived from the original on 2015-09-06.
  6. CWA sec. 304(d)(1), 33 U.S.C.   § 1314(d)(1) and "Secondary Treatment Regulation", Code of Federal Regulations, 40 CFR Part 133.
  7. "Secondary Treatment Standards". National Pollutant Discharge Elimination System. EPA. 2016-11-01.