QSAS

Last updated

Qatar Sustainability Assessment System (QSAS) is a green building certification system developed for the State of Qatar. The primary objective of Qatar Sustainability Assessment System [QSAS] is to create a sustainable built environment that minimizes ecological impact while addressing the specific regional needs and environment of Qatar. [1]

Contents

Overview

QSAS was developed by the Gulf Organisation for Research and Development (GORD) in collaboration with the T.C. Chan Center for Building Simulation and Energy Studies at the University of Pennsylvania . [2] [3] [4] Since its deployment in 2009, over 128 buildings in Qatar have been certified through QSAS. [5] In December 2010, QSAS was adopted into the curriculum of the environmental design faculty at King Fahd University and Qatar University. [6] In March, 2011 the State of Qatar integrated QSAS into the Qatar Construction Specifications [QCS] making the implementation of certain criteria mandatory for buildings developed in Qatar. [7]

The development of the rating system took advantage of a comprehensive review of combined best practices employed by a mix of established international and regional rating systems. This review has been performed while taking into consideration the needs that are specific to Qatar’s local environment, culture, and policies. This has led to adaptations and additions to sustainability criteria. Measurements for the rating system are designed to be performance-based and quantifiable. The result is a performance-based sustainable building rating system customized to the unique conditions and requirements of the State of Qatar. [8]

Rating System

QSAS consists of a series of sustainable categories and criteria, each with a direct impact on environmental stress mitigation. Each category measures a different aspect of the project’s environmental impact. The categories define these broad impacts and address ways in which a project can mitigate the negative environmental effects. These categories are then broken down into specific criteria that measure and define individual issues. These issues range from a thorough review of water consumption to an assessment of light quality. Each criterion specifies a process for measuring individual aspects of environmental impact and for documenting the degree to which the requirements have been met. A score is then awarded to each criterion based on the degree of compliance. [9]

The eight categories of QSAS are the following:

Urban Connectivity [UC]

The Urban Connectivity category consists of factors associated with the urban environment such as zoning, transportation networks and loadings. Loadings on the urban environment include traffic congestion and pollution.

Site [S]

The Site category consists of factors associated with land use such as land conservation or remediation and site selection, planning and development.

Energy [E]

The Energy category consists of factors associated with energy demand of buildings, the efficiency of energy delivery, and the use of fossil energy sources that result in harmful emissions.

Water [W]

The Water category consists of factors associated with water consumption and its associated burden on municipal supply and treatment systems.

Materials [M]

The Materials category consists of factors associated with material extraction, processing, manufacturing, distribution, use/re-use, and disposal.

Indoor Environment [IE]

The Indoor Environment category consists of factors associated with indoor environmental quality such as thermal comfort, air quality, acoustic quality, and light quality.

Cultural & Economic Value [CE]

The Cultural and Economic Value category consists of factors associated with cultural conservation and support of the national economy.

Management & Operations [MO]

The Management and Operations category consists of factors associated with building design management and operations.

Rating System Resources

QSAS consists of several resources used to facilitate the assessment of sustainability performance for buildings in Qatar. Target users for the resources are building planners, developers, owners, designers, engineers and environmentalists. The major resources available to QSAS members include the following:

QSAS Schemes

QSAS has been developed to rate different building types as well as projects on the Neighborhood scale for each phase of a building’s lifespan. The building schemes that can be rated with QSAS include:

Phases that can be rated using QSAS include:

The various schemes use similar categories and criteria across each system to facilitate use. The measurements, calculations, simulations, scoring ranges, and weights change accordingly for each building type and project phase.

QSAS Certification

The aim for all QSAS criteria and their associated measurements is to be performance-based and quantifiable on the scoring scale of -1 to 3 (-1, 0, 1, 2, 3) or 0 to 3, depending on the criterion’s level of impact. Each category and criterion has an associated weight based on its relative environmental, social, and economic impact. Once a score is assigned to each criterion in the assessment system, the values are multiplied by the weight and a cumulative final score is determined.

QSAS consists of six certification levels to measure the project’s impact. A building that obtains a cumulative final score below 0 does not meet the baseline and will be denied certification. Certification can only be achieved when the final score is greater than or equal to 0, earning a rating of 1, 2, 3, 4, 5, or 6 stars. The highest score a building can achieve is 3.0 and the highest certification level is 6 stars. [11]

Professional Accreditation

Professional Accreditation is granted to those qualified individuals who demonstrate in‐depth knowledge of the Qatar Sustainability Assessment System (QSAS) and sustainable building practices. The role of the accredited professional or QSAS Certified Green Professional (CGP) is to facilitate the submittal of projects for assessment under QSAS. The candidate must meet the following requirements to receive a QSAS CGP certificate:

Future Development

The T.C. Chan Center and GORD are currently working on further developing and expanding QSAS to other regions in the Middle East. [15]

Related Research Articles

<span class="mw-page-title-main">Green building</span> Structures and processes of building structures that are more environmentally responsible

Green building refers to both a structure and the application of processes that are environmentally responsible and resource-efficient throughout a building's life-cycle: from planning to design, construction, operation, maintenance, renovation, and demolition. This requires close cooperation of the contractor, the architects, the engineers, and the client at all project stages. The Green Building practice expands and complements the classical building design concerns of economy, utility, durability, and comfort. Green building also refers to saving resources to the maximum extent, including energy saving, land saving, water saving, material saving, etc., during the whole life cycle of the building, protecting the environment and reducing pollution, providing people with healthy, comfortable and efficient use of space, and being in harmony with nature Buildings that live in harmony. Green building technology focuses on low consumption, high efficiency, economy, environmental protection, integration and optimization.’

<span class="mw-page-title-main">Ecolabel</span> Labeling systems for food and consumer products

Ecolabels and Green Stickers are labeling systems for food and consumer products. The use of ecolabels is voluntary, whereas green stickers are mandated by law; for example, in North America major appliances and automobiles use Energy Star. They are a form of sustainability measurement directed at consumers, intended to make it easy to take environmental concerns into account when shopping. Some labels quantify pollution or energy consumption by way of index scores or units of measurement, while others assert compliance with a set of practices or minimum requirements for sustainability or reduction of harm to the environment. Many ecolabels are focused on minimising the negative ecological impacts of primary production or resource extraction in a given sector or commodity through a set of good practices that are captured in a sustainability standard. Through a verification process, usually referred to as "certification", a farm, forest, fishery, or mine can show that it complies with a standard and earn the right to sell its products as certified through the supply chain, often resulting in a consumer-facing ecolabel.

<span class="mw-page-title-main">Low-energy house</span> House designed for reduced energy use

A low-energy house is characterized by an energy-efficient design and technical features which enable it to provide high living standards and comfort with low energy consumption and carbon emissions. Traditional heating and active cooling systems are absent, or their use is secondary. Low-energy buildings may be viewed as examples of sustainable architecture. Low-energy houses often have active and passive solar building design and components, which reduce the house's energy consumption and minimally impact the resident's lifestyle. Throughout the world, companies and non-profit organizations provide guidelines and issue certifications to guarantee the energy performance of buildings and their processes and materials. Certifications include passive house, BBC—Bâtiment Basse Consommation—Effinergie (France), zero-carbon house (UK), and Minergie (Switzerland).

<span class="mw-page-title-main">Building science</span>

Building science is the science and technology-driven collection of knowledge in order to provide better indoor environmental quality (IEQ), energy-efficient built environments, and occupant comfort and satisfaction. Building physics, architectural science, and applied physics are terms used for the knowledge domain that overlaps with building science. In building science, the methods used in natural and hard sciences are widely applied, which may include controlled and quasi-experiments, randomized control, physical measurements, remote sensing, and simulations. On the other hand, methods from social and soft sciences, such as case study, interviews & focus group, observational method, surveys, and experience sampling, are also widely used in building science to understand occupant satisfaction, comfort, and experiences by acquiring qualitative data. One of the recent trends in building science is a combination of the two different methods. For instance, it is widely known that occupants' thermal sensation and comfort may vary depending on their sex, age, emotion, experiences, etc. even in the same indoor environment. Despite the advancement in data extraction and collection technology in building science, objective measurements alone can hardly represent occupants' state of mind such as comfort and preference. Therefore, researchers are trying to measure both physical contexts and understand human responses to figure out complex interrelationships.

<span class="mw-page-title-main">LEED</span> Standard for green building design

Leadership in Energy and Environmental Design (LEED) is a green building certification program used worldwide. Developed by the non-profit U.S. Green Building Council (USGBC), it includes a set of rating systems for the design, construction, operation, and maintenance of green buildings, homes, and neighborhoods, which aims to help building owners and operators be environmentally responsible and use resources efficiently.

The Code for Sustainable Homes was an environmental assessment method for rating and certifying the performance of new homes in United Kingdom. First introduced in 2006, it is a national standard for use in the design and construction of new homes with a view to encouraging continuous improvement in sustainable home building. In 2015 the Government in England withdrew it, consolidating some standards into Building Regulations.

Design standards, reference standards and performance standards are familiar throughout business and industry, virtually for anything that is definable. Sustainable design, taken as reducing our impact on the earth and making things better at the same time, is in the process of becoming defined. Also, many well organized specific methodologies are used by different communities of people for a variety of purposes.

Green Star is a voluntary sustainability rating system for buildings in Australia. It was launched in 2003 by the Green Building Council of Australia (GBCA).

<span class="mw-page-title-main">Green Seal</span>

Green Seal is a non-profit environmental standard development and certification organization. Its flagship program is the certification of products and services. Certification is based on Green Seal standards, which contain performance, health, and sustainability criteria.

BREEAM, first published by the Building Research Establishment (BRE) in 1990, is the world's longest established method of assessing, rating, and certifying the sustainability of buildings. More than 550,000 buildings have been 'BREEAM-certified' and over two million are registered for certification in more than 50 countries worldwide. BREEAM also has a tool which focuses on neighbourhood development.

<span class="mw-page-title-main">Green building in Israel</span> Overview of green building in Israel

Israel has a Green Building Standard for buildings with reduced environmental impact. The standard is based on a point rating system, awarding up to 5 stars based on the number of points achieved in 8 categories.

The T.C. Chan Center for Building Simulation and Energy Studies is an international non-profit organization headquartered at the University of Pennsylvania. It is an associated center of the University of Pennsylvania School of Design. It is dedicated to addressing the environmental issues faced by the building industry. The T.C. Chan Center engages in collaborative research that is related to the development of basic knowledge, technologies, and processes. Practical applications range from the building to the urban scale. Outcomes include patents, publications and proprietary information. The T.C. Chan Center is a member of the UNEP-SBCI.

<span class="mw-page-title-main">CASBEE</span>

CASBEE is the green building certification program used in Japan. It was created by a research committee called the Japan Sustainable Building Consortium (JSBC). The first assessment tool, CASBEE for offices, was launched in 2002. CASBEE now consists of multiple assessment tools tailored to different project scales. The tools are collectively called the CASBEE family. The development of CASBEE's assessment tools was a joint effort between JSBC sub-committees, industry, academia, and government leaders, and the Japanese Ministry of Land, Infrastructure, Transport and Tourism. The JSBC provides overall management of CASBEE, and the administrative office is located within the Institute for Building Environment and Energy Conservation (IBEC).

The Guiding Principles for Federal Leadership in High Performance and Sustainable Building are a set of established criteria developed by the U.S. Government for use by federal agencies committed to "federal leadership in the design, construction, and operation of High-Performance and Sustainable Buildings". Following this development effort, Executive Order 13514 was signed in 2009. Sec. 2(g) requires that: "(iii) at least 15 percent of the agency's existing buildings …meet the Guiding Principles by fiscal year 2015…”.

NABERS, the National Australian Built Environment Rating System, is an initiative by the government of Australia to measure and compare the environmental performance of Australian buildings and tenancies. There are NABERS rating tools for commercial office buildings to measure greenhouse gas emissions, energy efficiency, water efficiency, waste efficiency and indoor environment quality. There are also energy/greenhouse and water rating tools for hotels, shopping centres and data centres.

Green Building Initiative (GBI) is a 501(c)(3) nonprofit organization that owns and administers the Green Globes green building assessment and certification in the United States and Canada. It was established in 2004 and is headquartered in Portland, Oregon.

The Global Sustainability Assessment System (GSAS) [Originally QSAS] is the first performance-based system in the Middle East and North Africa (MENA) region, developed for assessing and rating buildings and infrastructure for their sustainability impacts. In 2016, FIFA officially endorsed GSAS as the sustainability assessment system for Qatar's eight stadiums set to host the 2022 FIFA World Cup. The primary objective of GSAS is to create a sustainable built environment that minimizes ecological impact and reduces resources consumption while addressing the local needs and environmental conditions specific to the region. GSAS adopts an integrated lifecycle approach for the assessment of the built environment including design, construction and operation phases.

Building information modeling (BIM) in green buildings aims at enabling sustainable designs and in turn allows architects and engineers to integrate and analyze building performance. It quantifies the environmental impacts of systems and materials to support the decisions needed to produce sustainable buildings, using information about sustainable materials that are stored in the database and interoperability between design and analysis tools. Such data can be useful for building life cycle assessments.

<span class="mw-page-title-main">Yousef Alhorr</span> Qatari environmentalist

Yousef M. Alhorr is a Qatari environmentalist known for his work in the field of sustainable built environment and climate actions. He is founder and chairman of the Gulf Organisation for Research and Development (GORD) and adviser for sustainable delivery and legacy of 2022 FIFA World Cup. He is the founding chairman of Global Carbon Council, which is one of the eight international programs approved by ICAO’s CORSIA and ICROA to supply carbon credits to international airlines to meet their carbon neutral growth. Alhorr is also the founding chairman of Global Accreditation Bureau – an accreditation body which is Associate Member of Asia Pacific Accreditation Cooperation (APAC), and an Accreditation Body Member of International Accreditation Forum (IAF). He is the president of Green Building Committee at the GCC Standardization Organization (GSO).

<span class="mw-page-title-main">Green building certification systems</span>

Green building certification systems are a set of rating systems and tools that are used to assess a building or a construction project's performance from a sustainability and environmental perspective. Such ratings aim to improve the overall quality of buildings and infrastructures, integrate a life cycle approach in its design and construction, and promote the fulfillment of the United Nations Sustainable Development Goals by the construction industry. Buildings that have been assessed and are deemed to meet a certain level of performance and quality, receive a certificate proving this achievement.

References

  1. ↑ Hitting the Green Wall | Taylor Wessing LLP
  2. ↑ Barwa, Qatari Diar, TC Chan sign deal - Emirates 24/7
  3. ↑ BARWA and Qatari Diar Develops the first Performance-Based Sustainability Rating System in the Middle East - Zawya
  4. ↑ GORD to establish Qatar as Middle East ‘Capital of Green building’ | Qatar Business & Corporate News Archived March 25, 2012, at the Wayback Machine
  5. ↑ Hill International MEP expert calls QSAS a success
  6. ↑ QSAS to be adopted in the curriculum of the Environment Design Faculty at King Fahd University of Petroleum and Minerals | Emirates Week Archived January 3, 2014, at the Wayback Machine
  7. ↑ Qatar to impose strict green standards from April | ConstructionWeekOnline.com
  8. ↑ Gulf Organisation for Research and Development and Qatar Olympic Committee Ink MOU | Emirates Week Archived January 3, 2014, at the Wayback Machine
  9. ↑ Privacy Policy | Green Building Solutions Doha Archived March 25, 2012, at the Wayback Machine
  10. ↑ "Archived copy" (PDF). Archived from the original (PDF) on September 11, 2011. Retrieved June 15, 2011.{{cite web}}: CS1 maint: archived copy as title (link)
  11. ↑ Sustainability Award | Green Building Solutions Doha Archived October 6, 2011, at the Wayback Machine
  12. ↑ Barwa, Qatari Diar organise workshop - MENAFN
  13. ↑ QSAS – CERTIFIED GREEN PROFESSIONAL® 3days Training Workshop Ends
  14. ↑ "Archived copy" (PDF). Archived from the original (PDF) on April 11, 2015. Retrieved December 12, 2012.{{cite web}}: CS1 maint: archived copy as title (link)
  15. ↑ Qatar’s GSAS Turns Other Rating Systems Green | Green Prophet
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.