 | This article relies largely or entirely on a single source .(December 2019) |
QoS Class Identifier (QCI) is a mechanism used in 3GPP Long Term Evolution (LTE) networks to ensure carrier traffic is allocated appropriate Quality of Service (QoS). Different carrier traffic requires different QoS and therefore different QCI values. QCI value 9 is typically used for the default carrier of a UE/PDN for non privileged subscribers. [1]
To ensure that carrier traffic in LTE networks is appropriately handled, a mechanism is needed to classify the different types of carriers into different classes, with each class having appropriate QoS parameters for the traffic type. Examples of the QoS parameters include Guaranteed Bit Rate (GBR) or non-Guaranteed Bit Rate (non-GBR), Priority Handling, Packet Delay Budget and Packet Error Loss rate. This overall mechanism is called QCI.
The QoS concept as used in LTE networks is class-based, where each carrier type is assigned one QoS Class Identifier (QCI) by the network. The QCI is a scalar that is used within the access network (namely the eNodeB) as a reference to node specific parameters that control packet forwarding treatment, for example scheduling weight, admission thresholds and link-layer protocol configuration.
The QCI is also mapped to transport network layer parameters in the relevant Evolved Packet Core (EPC) core network nodes (for example, the PDN Gateway (P-GW), Mobility Management Entity (MME) and Policy and Charging Rules Function (PCRF)), by preconfigured QCI to Differentiated Services Code Point (DSCP) mapping.
According to 3GPP TS 23.203, 9 QCI values in Rel-8 (13 QCIs Rel-12, 15 QCIs Rel-14) are standardized and associated with QCI characteristics in terms of packet forwarding treatment that the carrier traffic receives edge-to-edge between the UE and the P-GW. Scheduling priority, resource type, packet delay budget and packet error loss rate are the set of characteristics defined by the 3GPP standard and they should be understood as guidelines for the pre-configuration of node specific parameters to ensure that applications/services mapped to a given QCI receive the same level of QoS in multi-vendor environments as well as in roaming scenarios. The QCI characteristics are not signalled on any interface.
The following table illustrates the standardized characteristics as defined in the 3GPP TS 23.203 standard "Policy and Charging Control Architecture".
| QCI | Resource Type | Priority | Packet Delay Budget | Packet Error Loss Rate | Example Services |
|---|---|---|---|---|---|
| 1 | GBR | 2 | 100ms | 10−2 | Conversational Voice |
| 2 | GBR | 4 | 150ms | 10−3 | Conversational Video (Live Streaming) |
| 3 | GBR | 3 | 50ms | 10−3 | Real Time Gaming, V2X messages |
| 4 | GBR | 5 | 300ms | 10−6 | Non-Conversational Video (Buffered Streaming) |
| 65 | GBR | 0.7 | 75ms | 10−2 | Mission Critical user plane Push To Talk voice (e.g., MCPTT) |
| 66 | GBR | 2 | 100ms | 10−2 | Non-Mission-Critical user plane Push To Talk voice |
| 67 | GBR | 1.5 | 100ms | 10−3 | Mission Critical Video user plane |
| 75 | GBR | 2.5 | 50ms | 10−2 | V2X (Vehicle-to-everything) messages |
| 5 | non-GBR | 1 | 100ms | 10−6 | IMS Signalling |
| 6 | non-GBR | 6 | 300ms | 10−6 | Video (Buffered Streaming) TCP-Based (for example, www, email, chat, ftp, p2p and the like) |
| 7 | non-GBR | 7 | 100ms | 10−3 | Voice, Video (Live Streaming), Interactive Gaming |
| 8 | non-GBR | 8 | 300ms | 10−6 | Video (Buffered Streaming) TCP-Based (for example, www, email, chat, ftp, p2p and the like) |
| 9 | non-GBR | 9 | 300ms | 10−6 | Video (Buffered Streaming) TCP-Based (for example, www, email, chat, ftp, p2p and the like). Typically used as default carrier |
| 69 | non-GBR | 0.5 | 60ms | 10−6 | Mission Critical delay sensitive signalling (e.g., MC-PTT signalling) |
| 70 | non-GBR | 5.5 | 200ms | 10−6 | Mission Critical Data (e.g. example services are the same as QCI 6/8/9) |
| 79 | non-GBR | 6.5 | 50ms | 10−2 | V2X messages |
| 80 | non-GBR | 6.8 | 10ms | 10−6 | Low latency eMBB applications (TCP/UDP-based); Augmented Reality |
| 82 | GBR | 1.9 | 10ms | 10−4 | Discrete Automation (small packets) |
| 83 | GBR | 2.2 | 10ms | 10−4 | Discrete Automation (big packets) |
| 84 | GBR | 2.4 | 30ms | 10−5 | Intelligent Transport Systems |
| 85 | GBR | 2.1 | 5ms | 10−5 | Electricity Distribution- high voltage |
Every QCI (GBR and Non-GBR) is associated with a Priority level. Priority level 0.5 is the highest Priority level. If congestion is encountered, the lowest Priority level traffic (highest Priority number!) would be the first to be discarded.
QCI-65, QCI-66, QCI-69 and QCI-70 were introduced in 3GPP TS 23.203 Rel-12.
QCI-75 and QCI-79 were introduced in 3GPP TS 23.203 Rel-14.
QCI-67 was introduced in 3GPP TS 23.203 Rel-15.
Differentiated services or DiffServ is a computer networking architecture that specifies a mechanism for classifying and managing network traffic and providing quality of service (QoS) on modern IP networks. DiffServ can, for example, be used to provide low-latency to critical network traffic such as voice or streaming media while providing best-effort service to non-critical services such as web traffic or file transfers.
The GPRS core network is the central part of the general packet radio service (GPRS) which allows 2G, 3G and WCDMA mobile networks to transmit Internet Protocol (IP) packets to external networks such as the Internet. The GPRS system is an integrated part of the GSM network switching subsystem.
Evolution-Data Optimized is a telecommunications standard for the wireless transmission of data through radio signals, typically for broadband Internet access. EV-DO is an evolution of the CDMA2000 (IS-2000) standard which supports high data rates and can be deployed alongside a wireless carrier's voice services. It uses advanced multiplexing techniques including code-division multiple access (CDMA) as well as time-division multiplexing (TDM) to maximize throughput. It is a part of the CDMA2000 family of standards and has been adopted by many mobile phone service providers around the world particularly those previously employing CDMA networks. It is also used on the Globalstar satellite phone network.
The IP Multimedia Subsystem or IP Multimedia Core Network Subsystem (IMS) is a standardised architectural framework for delivering IP multimedia services. Historically, mobile phones have provided voice call services over a circuit-switched-style network, rather than strictly over an IP packet-switched network. Alternative methods of delivering voice (VoIP) or other multimedia services have become available on smartphones, but they have not become standardized across the industry. IMS is an architectural framework that provides such standardization.
GPRS Tunnelling Protocol (GTP) is a group of IP-based communications protocols used to carry general packet radio service (GPRS) within GSM, UMTS, LTE and 5G NR radio networks. In 3GPP architectures, GTP and Proxy Mobile IPv6 based interfaces are specified on various interface points.
E-UTRA is the air interface of 3rd Generation Partnership Project (3GPP) Long Term Evolution (LTE) upgrade path for mobile networks. It is an acronym for Evolved Universal Mobile Telecommunications System (UMTS) Terrestrial Radio Access, also referred to as the 3GPP work item on the Long Term Evolution (LTE) also known as the Evolved Universal Terrestrial Radio Access (E-UTRA) in early drafts of the 3GPP LTE specification. E-UTRAN is the initialism of Evolved UMTS Terrestrial Radio Access Network and is the combination of E-UTRA, user equipment (UE), and E-UTRAN Node B or Evolved Node B (eNodeB).
High Speed Packet Access (HSPA) is an amalgamation of two mobile protocols—High Speed Downlink Packet Access (HSDPA) and High Speed Uplink Packet Access (HSUPA)—that extends and improves the performance of existing 3G mobile telecommunication networks using the WCDMA protocols. A further-improved 3GPP standard called Evolved High Speed Packet Access was released late in 2008, with subsequent worldwide adoption beginning in 2010. The newer standard allows bit rates to reach as high as 337 Mbit/s in the downlink and 34 Mbit/s in the uplink; however, these speeds are rarely achieved in practice.
Evolved High Speed Packet Access, HSPA+, HSPA (Plus) or HSPAP, is a technical standard for wireless broadband telecommunication. It is the second phase of HSPA which has been introduced in 3GPP release 7 and being further improved in later 3GPP releases. HSPA+ can achieve data rates of up to 42.2 Mbit/s. It introduces antenna array technologies such as beamforming and multiple-input multiple-output communications (MIMO). Beam forming focuses the transmitted power of an antenna in a beam towards the user's direction. MIMO uses multiple antennas at the sending and receiving side. Further releases of the standard have introduced dual carrier operation, i.e. the simultaneous use of two 5 MHz carriers. HSPA+ is an evolution of HSPA that upgrades the existing 3G network and provides a method for telecom operators to migrate towards 4G speeds that are more comparable to the initially available speeds of newer LTE networks without deploying a new radio interface. HSPA+ should not be confused with LTE though, which uses an air interface based on orthogonal frequency-division modulation and multiple access.
System Architecture Evolution (SAE) is the core network architecture of mobile communications protocol group 3GPP's LTE wireless communication standard.
A Home Node B, or HNB, is the 3GPP's term for a 3G femtocell or Small Cell.
Proxy Mobile IPv6 is a network-based mobility management protocol standardized by IETF and is specified in RFC 5213. It is a protocol for building a common and access technology independent of mobile core networks, accommodating various access technologies such as WiMAX, 3GPP, 3GPP2 and WLAN based access architectures. Proxy Mobile IPv6 is the only network-based mobility management protocol standardized by IETF.
Access network discovery and selection function (ANDSF) is an entity within an evolved packet core (EPC) of the system architecture evolution (SAE) for 3GPP compliant mobile networks. The purpose of the ANDSF is to assist user equipment (UE) to discover non-3GPP access networks – such as Wi-Fi or WIMAX – that can be used for data communications in addition to 3GPP access networks and to provide the UE with rules policing the connection to these networks.
HNBAP is a control protocol found in Home Node B networks on the Iu-h interface.
A Home eNodeB, or HeNB, is the 3GPP's term for an LTE femtocell or Small Cell.
OTDOA is a positioning feature introduced in rel9 E-UTRA. It's a multilateration method in which the User Equipment (UE) measures the time difference between some specific signals from several eNodeBs and reports these time differences to a specific device in the network. The ESMLC based on these time differences and knowledge of the enodeBs locations calculates the UEs' position.
IMS is a set of specifications to offer multimedia services through IP protocol. This makes it possible to incorporate all kinds of services, such as voice, multimedia and data, on an accessible platform through any Internet connection.
Time-Sensitive Networking (TSN) is a set of standards under development by the Time-Sensitive Networking task group of the IEEE 802.1 working group. The TSN task group was formed in November 2012 by renaming the existing Audio Video Bridging Task Group and continuing its work. The name changed as a result of the extension of the working area of the standardization group. The standards define mechanisms for the time-sensitive transmission of data over deterministic Ethernet networks.
ViLTE, an acronym for "Video over LTE", is a conversational video service based on the IP Multimedia Subsystem (IMS) core network like VoLTE. It has specific profiles for the control and VoLTE of the video service and uses LTE as the radio access medium. The service as a whole is governed by the GSM Association in PRD IR.94.
LTE-WLAN aggregation (LWA) is a technology defined by the 3GPP. In LWA, a mobile handset supporting both LTE and Wi-Fi may be configured by the network to utilize both links simultaneously. It provides an alternative method of using LTE in unlicensed spectrum, which unlike LAA/LTE-U can be deployed without hardware changes to the network infrastructure equipment and mobile devices, while providing similar performance to that of LAA. Unlike other methods of using LTE and WLAN simultaneously, LWA allows using both links for a single traffic flow and is generally more efficient, due to coordination at lower protocol stack layers.
Packet Forwarding Control Protocol (PFCP) is a 3GPP protocol used on the Sx/N4 interface between the control plane and the user plane function, specified in TS 29.244. It is one of the main protocols introduced in the 5G Next Generation Mobile Core Network, but also used in the 4G/LTE EPC to implement the Control and User Plane Separation (CUPS). PFCP and the associated interfaces seek to formalize the interactions between different types of functional elements used in the Mobile Core Networks as deployed by most operators providing 4G, as well as 5G, services to mobile subscribers. These 2 types of components are: