Quikkit Glass Goose

Last updated

Glass Goose
Aero Gare Seahawk.jpg
Aero Gare Seahawk
Role Amateur-built aircraft
National origin United States
Manufacturer Quikkit
DesignerTom Scott
Introduction1982
StatusProduction completed (2013)

The Quikkit Glass Goose is an American two-seat biplane amphibious aircraft, designed by Tom Scott and marketed for homebuilding by Quikkit of Dallas, Texas. [1]

Contents

The Glass Goose is based on the earlier Sea Hawker, which was designed by Garry LeGare in 1982 and sold through his firm Aero Gare as the Sea Hawk and, later, Sea Hawker. LeGare sold the rights to the aircraft to Aero Composites in 1986, which sold them again two years later to (unrelated) Aero Composite Technologies. [2] [3]

Design and development

Tom Scott purchased a Sea Hawker kit in October 1984 and completed the aircraft in March 1986, constructing the aircraft according to the plans. He was not happy with the resulting aircraft and over five years incorporated improvements to address performance and stability shortcomings. The final design has more wing area, a larger hull surface and improved pylon aerodynamics, plus many other improvements. This redesign became the Glass Goose kit. [1]

The Glass Goose features a cantilever biplane layout, without interplane struts, a two-seats-in-side-by-side configuration enclosed cockpit under a bubble canopy, retractable tricycle landing gear and a single engine in pusher configuration. [2] [3]

The aircraft is made from composites. Its 27 ft (8.2 m) span wing has an area of 12 m2 (130 sq ft). Standard engines used are 160 to 185 hp (119 to 138 kW) Lycomings, although the eight-cylinder 180 hp (134 kW) Jabiru 5100 and Mazda Wankel engines have also been employed. [2] [3]

In 2013, Kitplanes Magazine reported that they could not reach the Quikkit Division of Rainbow Flyers, Inc., the Glass Goose kit manufacturer, so they considered the design unavailable. [4]

Specifications (Glass Goose)

Data from Bayerl and Tacke [2] [3]

General characteristics

Performance

Related Research Articles

<span class="mw-page-title-main">ADI Stallion</span> Type of aircraft

The ADI Stallion is a US civil utility aircraft that first flew in July 1994. It is marketed in kit form for homebuilding by Aircraft Designs Inc.

<span class="mw-page-title-main">Thorp T-18</span> American homebuilt aircraft

The Thorp T-18 is an American, two-place, all-metal, plans-built, homebuilt aircraft designed in 1963 by John Thorp.

<span class="mw-page-title-main">Aero AT-3</span> Type of aircraft

The Aero AT-3 is a two-seat, low wing, utility aircraft manufactured in Poland by Aero AT in ready-to-fly certificated form and as a kitplane. The aircraft is of conventional configuration and features fixed tricycle undercarriage. The structure is largely of all-metal construction. Designed by Tomasz Antoniewski it first flew in 1997 and deliveries to customers commenced in 2002. It is certified under the European Very Light Aircraft regulations. On July 2, 2010 Aero AT-3 was granted an American Federal Aviation Administration type certificate, based on its European VLA certification.

<span class="mw-page-title-main">Murphy Rebel</span> Type of aircraft

The Murphy Rebel is a two- or three-seat, strut braced, high wing, taildragger monoplane which is sold in kit form by Murphy Aircraft in Chilliwack, British Columbia, Canada.

<span class="mw-page-title-main">Zenith STOL CH 701</span> Canadian family of light, two-seat aircraft

The Zenith STOL CH 701 and CH 750 are a family of light, two-place kit-built STOL aircraft designed by Canadian aeronautical engineer Chris Heintz through his Midland, Ontario, based company, Zenair. The CH 701 first flew in 1986 and the design is still in production. The CH 750 was first introduced in 2008. The CH 701 was later developed into the four-place Zenith STOL CH 801.

<span class="mw-page-title-main">Lancair Legacy</span> American homebuilt aircraft

The Lancair Legacy, a modernized version of the Lancair 320, is a low-wing two-place retractable-gear composite monoplane manufactured by the American company Lancair. It is available as a kit that cost US$71,500 in 2011. There is also a fixed-gear version, the Legacy FG. The retractable version of the Legacy cruises at 276 mph at 8,000 ft and the fixed gear version cruises at 215 mph.

<span class="mw-page-title-main">Jabiru J430</span> Type of aircraft

The Jabiru J430 is one model in a large family of two- and four-seat Australian light aircraft developed as a touring aircraft and provided in kit form by Jabiru Aircraft.

<span class="mw-page-title-main">Fisher Celebrity</span> Canadian ultralight aircraft

The Fisher Celebrity is a Canadian two-seat, conventional landing gear, single engined, biplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, United States but the company is now located in Dorchester, Ontario, Canada.

<span class="mw-page-title-main">Fisher Dakota Hawk</span> Canadian homebuilt light aircraft

The Fisher Dakota Hawk is a Canadian side-by-side two-seat, conventional landing gear, single-engined, high-wing monoplane kit aircraft designed for construction by amateur builders.

The Preceptor STOL King is an American STOL amateur-built aircraft that was designed and produced by Preceptor Aircraft, of Rutherfordton, North Carolina. When it was available the aircraft was supplied as plans or as a kit for amateur construction.

<span class="mw-page-title-main">Dream Tundra</span> Type of aircraft

The Dream Tundra is a robust, single-engine, high-wing monoplane designed in Canada. Seating four, its short takeoff and landing characteristics can be adapted to land, snow, or water use. It is produced as a kit for homebuilding.

<span class="mw-page-title-main">Murphy Elite</span> Canadian homebuilt light aircraft

The Murphy Elite is a Canadian light aircraft that was designed and is produced by Murphy Aircraft of Chilliwack, British Columbia. The aircraft is supplied as a kit for amateur construction.

<span class="mw-page-title-main">A2 CZ Ellipse Spirit</span> Czech ultralight aircraft

The A2 CZ Ellipse Spirit is a Czech ultralight aircraft, designed and produced by A2 CZ. The aircraft was introduced at the Aero show in 2011 and is supplied complete and ready to fly or as a kit for amateur construction.

The Bushcaddy L-164 is a Canadian kit aircraft that was designed by Sean Gilmore and produced by Canadian Light Aircraft Sales and Service and most recently by Bushcaddy. The aircraft is supplied as a kit for amateur construction.

<span class="mw-page-title-main">Jabiru J170</span> Australian ultralight aircraft

The Jabiru J170 is an Australian ultralight and light-sport aircraft, designed and produced by Jabiru Aircraft. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.

<span class="mw-page-title-main">Pro-Composites Personal Cruiser</span> Type of aircraft

The Pro-Composites Personal Cruiser, also called the Corvair Cruiser, is a single seat, composite homebuilt aircraft.

The Servoplant Aerocraft is a Romanian agricultural ultralight biplane, designed and produced by agricultural machinery manufacturer Servoplant, of Bucharest. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.

The AeroLites Bearcat is an American amateur-built aircraft, designed and produced by AeroLites, of Welsh, Louisiana and introduced in 1984. The aircraft is supplied as a kit for amateur construction.

<span class="mw-page-title-main">Airdrome Nieuport 24</span> American fighter replica

The Airdrome Nieuport 24 is an American amateur-built aircraft, designed and produced by Airdrome Aeroplanes, of Holden, Missouri. The aircraft is supplied as a kit for amateur construction and is available in two versions, the Nieuport 24 and Nieuport 24 bis.

The Pro-Composites Vision is an American amateur-built aircraft, designed by Steve Rahm and produced by Pro-Composites of Buffalo Grove, Illinois. The aircraft is supplied in the form of plans for amateur construction, with some pre-formed parts made available to speed construction.

References

  1. 1 2 Purdy, Don (15 July 1998), AeroCrafter – Homebuilt Aircraft Sourcebook (5th ed.), BAI Communications, p. 231, ISBN   0-9636409-4-1 .
  2. 1 2 3 4 Bayerl, Robby; Berkemeier, Martin (2011), "World Directory of Leisure Aviation 2011–12", World Directory of Light Aviation, et al, Lancaster, UK: WDLA: 116, ISSN   1368-485X .
  3. 1 2 3 4 Tacke, Willi; Marino Boric; et al: World Directory of Light Aviation 2015–16, p. 121. Flying Pages Europe SARL, 2015. ISSN   1368-485X
  4. Bernard, Mary: 2013 Kit Aircraft Buyer’s Guide, October 18, 2012, Kitplanes Magazine, retrieved July 4, 2023