RICE chart

Last updated July 05, 2022

An ICE table or RICE box or RICE chart is a tabular system of keeping track of changing concentrations in an equilibrium reaction. ICE stands for initial, change, equilibrium. It is used in chemistry to keep track of the changes in amount of substance of the reactants and also organize a set of conditions that one wants to solve with.^[1] Some sources refer to a RICE table (or box or chart) where the added R stands for the reaction to which the table refers.^[2] Others simply call it a concentration table (for the acid–base equilibrium).^[3]

Example

To illustrate the processes, consider the case of dissolving a weak acid, HA, in water. The pH can be calculated using an ICE table. Note that in this example, we are assuming that the acid is not very weak, and that the concentration is not very dilute, so that the concentration of [OH⁻] ions can be neglected. This is equivalent to the assumption that the final pH will be below about 6 or so. See Calculations of pH for more details.

First write down the equilibrium expression.

{\ce {HA<=>{A^{-}}+{H+}}}

The columns of the table correspond to the three species in equilibrium.

(R)	[HA]	[A⁻]	[H⁺]
I	C_a	0	0
C	−x	+x	+x
E	C_a − x	x	x

The first row shows the reaction, which some authors label R and some leave blank.

The second row, labeled I, has the initial conditions: the nominal concentration of acid is C_a and it is initially undissociated, so the concentrations of A⁻ and H⁺ are zero.

The third row, labeled C, specifies the change that occurs during the reaction. When the acid dissociates, its concentration changes by an amount $-x$ , and the concentrations of A⁻ and H⁺ both change by an amount $+x$ . This follows from consideration of mass balance (the total number of each atom/molecule must remain the same) and charge balance (the sum of the electric charges before and after the reaction must be zero).

Note that the coefficients in front of the "x" correlate to the mole ratios of the reactants to the product. For example, if the reaction equation had 2 H⁺ ions in the product, then the "change" for that cell would be "2x"

The fourth row, labeled E, is the sum of the first two rows and shows the final concentrations of each species at equilibrium.

It can be seen from the table that, at equilibrium, [H⁺] = x.

To find x, the acid dissociation constant (that is, the equilibrium constant for acid-base dissociation) must be specified.

K_{\text{a}}={\frac {{\ce {[H^+][A^-]}}}{{\ce {[HA]}}}}

Substitute the concentrations with the values found in the last row of the ICE table.

K_{\text{a}}={\frac {x^{2}}{C_{a}-x}}

x^{2}+K_{\text{a}}x-K_{\text{a}}C_{a}=0

With specific values for C_a and K_a this quadratic equation can be solved for x. Assuming^[4] that pH = −log₁₀[H⁺] the pH can be calculated as pH = −log₁₀x.

If the degree of dissociation is quite small, C_a ≫ x and the expression simplifies to

K_{\text{a}}={\frac {x^{2}}{C_{a}}}

and pH = 1/2 (pK_a − log C_a). This approximate expression is good for pK_a values larger than about 2 and concentrations high enough.

Related Research Articles

An acid is a molecule or ion capable of either donating a proton (i.e. hydrogen ion, H⁺), known as a Brønsted–Lowry acid, or forming a covalent bond with an electron pair, known as a Lewis acid.

In a chemical reaction, chemical equilibrium is the state in which both the reactants and products are present in concentrations which have no further tendency to change with time, so that there is no observable change in the properties of the system. This state results when the forward reaction proceeds at the same rate as the reverse reaction. The reaction rates of the forward and backward reactions are generally not zero, but they are equal. Thus, there are no net changes in the concentrations of the reactants and products. Such a state is known as dynamic equilibrium.

In chemistry, biochemistry, and pharmacology, a dissociation constant is a specific type of equilibrium constant that measures the propensity of a larger object to separate (dissociate) reversibly into smaller components, as when a complex falls apart into its component molecules, or when a salt splits up into its component ions. The dissociation constant is the inverse of the association constant. In the special case of salts, the dissociation constant can also be called an ionization constant. For a general reaction:

In chemistry, pH, historically denoting "potential of hydrogen" is a scale used to specify the acidity or basicity of an aqueous solution. Acidic solutions are measured to have lower pH values than basic or alkaline solutions.

A buffer solution is an aqueous solution consisting of a mixture of a weak acid and its conjugate base, or vice versa. Its pH changes very little when a small amount of strong acid or base is added to it. Buffer solutions are used as a means of keeping pH at a nearly constant value in a wide variety of chemical applications. In nature, there are many living systems that use buffering for pH regulation. For example, the bicarbonate buffering system is used to regulate the pH of blood, and bicarbonate also acts as a buffer in the ocean.

In chemistry, carbonic acid is a dibasic acid with the chemical formula H₂CO₃. The pure compound decomposes at temperatures greater than ca. −80 °C.

An acid dissociation constant, K_a, is a quantitative measure of the strength of an acid in solution. It is the equilibrium constant for a chemical reaction

Solubility equilibrium is a type of dynamic equilibrium that exists when a chemical compound in the solid state is in chemical equilibrium with a solution of that compound. The solid may dissolve unchanged, with dissociation, or with chemical reaction with another constituent of the solution, such as acid or alkali. Each solubility equilibrium is characterized by a temperature-dependent solubility product which functions like an equilibrium constant. Solubility equilibria are important in pharmaceutical, environmental and many other scenarios.

In electrochemistry, the Nernst equation is a chemical thermodynamical relationship that permits the calculation of the reduction potential of a reaction from the standard electrode potential, absolute temperature, the number of electrons involved in the oxydo-reduction reaction, and activities of the chemical species undergoing reduction and oxidation respectively. It was named after Walther Nernst, a German physical chemist who formulated the equation.

In chemistry, a dynamic equilibrium exists once a reversible reaction occurs. Substances transition between the reactants and products at equal rates, meaning there is no net change. Reactants and products are formed at such a rate that the concentration of neither changes. It is a particular example of a system in a steady state.

The self-ionization of water (also autoionization of water, and autodissociation of water) is an ionization reaction in pure water or in an aqueous solution, in which a water molecule, H₂O, deprotonates (loses the nucleus of one of its hydrogen atoms) to become a hydroxide ion, OH⁻. The hydrogen nucleus, H⁺, immediately protonates another water molecule to form hydronium, H₃O⁺. It is an example of autoprotolysis, and exemplifies the amphoteric nature of water.

In chemistry and biochemistry,
the Henderson–Hasselbalch equation

Neutralization (chemistry) Chemical reaction in which an acid and a base react quantitatively

In chemistry, neutralization or neutralisation is a chemical reaction in which acid and a base react quantitatively with each other. In a reaction in water, neutralization results in there being no excess of hydrogen or hydroxide ions present in the solution. The pH of the neutralized solution depends on the acid strength of the reactants.

A reversible reaction is a reaction in which the conversion of reactants to products and the conversion of products to reactants occur simultaneously.

An acid–base titration is a method of quantitative analysis for determining the concentration of an acid or base by exactly neutralizing it with a standard solution of base or acid having known concentration. A pH indicator is used to monitor the progress of the acid–base reaction. If the acid dissociation constant (pK_a) of the acid or base dissociation constant (pK_b) of base in the analyte solution is known, its solution concentration (molarity) can be determined. Alternately, the pK_a can be determined if the analyte solution has a known solution concentration by constructing a titration curve.

The equilibrium constant of a chemical reaction is the value of its reaction quotient at chemical equilibrium, a state approached by a dynamic chemical system after sufficient time has elapsed at which its composition has no measurable tendency towards further change. For a given set of reaction conditions, the equilibrium constant is independent of the initial analytical concentrations of the reactant and product species in the mixture. Thus, given the initial composition of a system, known equilibrium constant values can be used to determine the composition of the system at equilibrium. However, reaction parameters like temperature, solvent, and ionic strength may all influence the value of the equilibrium constant.

Dissociation in chemistry and biochemistry is a general process in which molecules (or ionic compounds such as salts, or complexes) separate or split into other things such as atoms, ions, or radicals, usually in a reversible manner. For instance, when an acid dissolves in water, a covalent bond between an electronegative atom and a hydrogen atom is broken by heterolytic fission, which gives a proton (H⁺) and a negative ion. Dissociation is the opposite of association or recombination.

Equilibrium constants are determined in order to quantify chemical equilibria. When an equilibrium constant $K$ is expressed as a concentration quotient,

Equilibrium chemistry is concerned with systems in chemical equilibrium. The unifying principle is that the free energy of a system at equilibrium is the minimum possible, so that the slope of the free energy with respect to the reaction coordinate is zero. This principle, applied to mixtures at equilibrium provides a definition of an equilibrium constant. Applications include acid–base, host–guest, metal–complex, solubility, partition, chromatography and redox equilibria.

Acid strength is the tendency of an acid, symbolised by the chemical formula $, to dissociate into a proton,, and an anion, . The dissociation of a strong acid in solution is effectively complete, except in its most concentrated solutions.$

References

↑ Petrucci, Ralph H.; Harwood, William S.; Herring, F. Geoffrey (2002). General Chemistry (8th ed.). Prentice Hall. pp. 648–653. ISBN 0-13-014329-4. We will introduce a tabular system for keeping track of the changing concentrations of the reactants and products that some call an ICE table.
↑ "R.I.C.E. Tables (I.C.E. Tables) and Equilibrium Constant Calculations Tutorial". AUS-e-TUTE : Chemistry Teaching and Learning Resources. AUS-e-tute (Australia). Retrieved 9 April 2021. R.I.C.E. tables are also known as I.C.E. tables, ICE boxes, RICE boxes, ICE charts or RICE charts.
↑ Ebbing, Darrell; Gammon, Steven (2016). General Chemistry (11 ed.). Cengage Learning. pp. 569–601. ISBN 978-1305580343.
↑ Strictly speaking pH is equal to −log₁₀{H⁺} where {H⁺} is the activity of the hydrogen ion. In dilute solution concentration is almost equal to activity

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[1] Petrucci, Ralph H.; Harwood, William S.; Herring, F. Geoffrey (2002). General Chemistry (8th ed.). Prentice Hall. pp. 648–653. ISBN 0-13-014329-4. We will introduce a tabular system for keeping track of the changing concentrations of the reactants and products that some call an ICE table.

[2] "R.I.C.E. Tables (I.C.E. Tables) and Equilibrium Constant Calculations Tutorial". AUS-e-TUTE : Chemistry Teaching and Learning Resources. AUS-e-tute (Australia). Retrieved 9 April 2021. R.I.C.E. tables are also known as I.C.E. tables, ICE boxes, RICE boxes, ICE charts or RICE charts.

[3] Ebbing, Darrell; Gammon, Steven (2016). General Chemistry (11 ed.). Cengage Learning. pp. 569–601. ISBN 978-1305580343.

[4] Strictly speaking pH is equal to −log₁₀{H⁺} where {H⁺} is the activity of the hydrogen ion. In dilute solution concentration is almost equal to activity

[1]

[2]

[3]

[4]