RNA Automation, a member of Rhein-Nadel Automation, was established in Birmingham UK, in 1986, and has progressed into becoming the major supplier of parts handling equipment in the UK.[citation needed] The company operates in the area of specialized Automation Engineering, providing automatic parts handling equipment for high volume production in the cosmetics, pharmaceutical, electronics, food and metal working industries, with seven manufacturing facilities across Europe and North America and a network of sales and service outlets across the globe.
Founded in 1972, Rhein-Nadel Automation or RNA operates worldwide in parts handling technology. Rhein-Nadel Automation is a member of the Rheinnadel Group, which has been based since 1898 in the city of Aachen, Germany. Rhein-Nadel Automation have four manufacturing sites in Germany and individual manufacturing plants in the UK, Spain and Switzerland, together with a world-wide, decentralized distribution and service network with 28 subsidiaries.[citation needed]
Time line
1968 — The department of the needle factory, so far only responsible for the internal construction of operating materials and machines, trades under the name Rheinnadel Maschinenbau and begins working for external customers.
1972 — Rheinnadel Maschinenbau now also uses the firm name Rhein-Nadel Automation GmbH and concentrates exclusively on the area of Feeding Technology.
1980–1989 — Rhein-Nadel Automation expands. The permanent establishment in Ergolding and the subsidiaries in Switzerland and Great Britain are found.
1990–1999 — Rhein-Nadel Automation continues to grow. The Spanish company Vibrant S.A. is purchased.
2000 — With RNA Automated Systems Inc., the first subsidiary outside of Europe to take up its commercial activities in Canada.
2004 — The Rheinnadel Group concentrates its activities on the area of Automation. RNA broadens its range with the components and continues to extend its development capacities.
RNA Automation specializes in automated feeder and specialist handling systems, offering vibratory bowl feeders, Linear Feeders, Centrifugal Feeders and Step Feeder systems. RNA also supplies a range of specialist handling equipment, including Vision Guided Robots, Tablet Inspection, Vision Inspection, Tray Loading, and Bottle Handling.
Technology
RNA supplies a range of vibratory, centrifugal feeders, linear and conveyor feed systems, and hopper elevator systems in different formats.
In association with Hoppmann Corporation, RNA offers a full range of tooled centrifugal feeders. The centrifugal feeder systems can be interfaced and supplied as a complete packaging line with further production transportation via downstream conveyor systems to subsequent packaging operations such as capping, labelling, flow wrapping, and cartoning machines.
Specialist handling
RNA are the sole agents in the UK and Ireland for the SVIA range of Vision Guided Robotic Systems. All systems have a Robotic arm for handling and manipulating the product, a camera system, and share the same PC-based control system and are, in most cases, integrated with a standard ABB robot controller.
RNA, alongside camera specialists Machine Vision Technology, has developed a tablet inspection system to inspect and sort tablets up to and over 1000 parts per minute. The specification of a tablet inspection system is as follows:
A 600mm diameter vibratory bowl feeder in stainless steel and a variable speed controller. A speed of 800–1000 tablets per minute Outputs onto a conveyor with a reject sort facility. With up to four double-speed progressive scan cameras and lighting mounted along the conveyor, A high-speed PC with a 17-inch LCD display mounted in a SS enclosure. The system is designed to meet pharmaceutical standards The software complies with FDA requirements. All documentation is to CFR 21 pt. 11, with the fully validated version option.[citation needed]
Related Research Articles
An industrial robot is a robot system used for manufacturing. Industrial robots are automated, programmable and capable of movement on three or more axes.
Machine vision is the technology and methods used to provide imaging-based automatic inspection and analysis for such applications as automatic inspection, process control, and robot guidance, usually in industry. Machine vision refers to many technologies, software and hardware products, integrated systems, actions, methods and expertise. Machine vision as a systems engineering discipline can be considered distinct from computer vision, a form of computer science. It attempts to integrate existing technologies in new ways and apply them to solve real world problems. The term is the prevalent one for these functions in industrial automation environments but is also used for these functions in other environment vehicle guidance.
Automation describes a wide range of technologies that reduce human intervention in processes, mainly by predetermining decision criteria, subprocess relationships, and related actions, as well as embodying those predeterminations in machines. Automation has been achieved by various means including mechanical, hydraulic, pneumatic, electrical, electronic devices, and computers, usually in combination. Complicated systems, such as modern factories, airplanes, and ships typically use combinations of all of these techniques. The benefit of automation includes labor savings, reducing waste, savings in electricity costs, savings in material costs, and improvements to quality, accuracy, and precision.
FANUC is a Japanese group of companies that provide automation products and services such as robotics and computer numerical control wireless systems. These companies are principally FANUC Corporation of Japan, Fanuc America Corporation of Rochester Hills, Michigan, USA, and FANUC Europe Corporation S.A. of Luxembourg.
KUKA is a German manufacturer of industrial robots and factory automation systems. In 2016, the company was acquired by Chinese appliance manufacturer Midea Group.
A reconfigurable manufacturing system (RMS) is one designed at the outset for rapid change in its structure, as well as its hardware and software components, in order to quickly adjust its production capacity and functionality within a part family in response to sudden market changes or intrinsic system change.
Surface-mount technology (SMT) component placement systems, commonly called pick-and-place machines or P&Ps, are robotic machines which are used to place surface-mount devices (SMDs) onto a printed circuit board (PCB). They are used for high speed, high precision placing of a broad range of electronic components, for example capacitors, resistors, integrated circuits onto the PCBs which are in turn used in computers, consumer electronics as well as industrial, medical, automotive, military and telecommunications equipment. Similar equipment exists for through-hole components. This type of equipment is sometimes used to package microchips using the flip chip method.
Integrated Micro-electronics, Inc. provides electronics manufacturing services (EMS) and power semiconductor assembly and test services (SATS) with manufacturing facilities in Asia, Europe, and North America. Its headquarters is located in Biñan, Laguna.
Omron Adept Technology, Inc. is a multinational corporation with headquarters in Pleasanton, California. The company focus on industrial automation and robotics, including software and vision guidance. Adept has offices throughout the United States as well as in Dortmund, Germany, Paris, France, and Singapore. Adept was acquired by Omron in October 2015.
Vibratory bowl feeders, also known as a bowl feeders, are common devices used to orient and feed individual component parts for assembly on industrial production lines. They are used when a randomly sorted bulk package of small components must be fed into another machine one-by-one, oriented in a particular direction.
A vision-guided robot (VGR) system is basically a robot fitted with one or more cameras used as sensors to provide a secondary feedback signal to the robot controller to more accurately move to a variable target position. VGR is rapidly transforming production processes by enabling robots to be highly adaptable and more easily implemented, while dramatically reducing the cost and complexity of fixed tooling previously associated with the design and set up of robotic cells, whether for material handling, automated assembly, agricultural applications, life sciences, and more.
A vibratory feeder is an instrument that uses vibration to "feed" material to a process or machine. Vibratory feeders use both vibration and gravity to move material. Gravity is used to determine the direction, either down, or down and to a side, and then vibration is used to move the material. They are mainly used to transport a large number of smaller objects.
Dematic is an American supplier of materials handling systems, software and services. With a growth rate of 21.2% in 2021 Dematic was listed as the world's second-largest materials handling systems supplier with a revenue of 3.2 billion USD. The company employs over 10,000 people and has engineering centres and manufacturing facilities in the United States, Germany, United Kingdom, Mexico, Australia, Belgium, China, Italy, Spain, France, Lithuania and Czech Republic. Its customer base includes small, medium and large companies in several other countries across six continents.
Ishida Co., Ltd. is a Japanese multinational company which manufactures food packing machinery. It has been in business since 1893 and is a privately owned family business. It invented the multihead weigher, for which it enjoys a global market share of 70%. The company also makes weighing, packing and inspection equipment and packing line systems for food and non-food industries.
Fillers are used for packaging, mainly for food/beverage but for other products as well. These are used to fill either a bottle or a pouch, depending on the product.
Elecon Engineering Company Limited is an Indian multinational company headquartered in Anand, Gujarat. The company specializes in the manufacturing of industrial gear and material handling equipment. Elecon is one of the largest Asian manufacturers of industrial gears and material handling equipment for core major sector like power, steel, cement, sugar, paper, mining, rubber and many more. Elecon group has subsidiaries such as Eimco Elecon Ltd, Elecon Hydraulics, Elecon Information Technology Ltd (EITL) and Tech Elecon Pvt. Ltd. (TEPL).
Component placement is an electronics manufacturing process that places electrical components precisely on printed circuit boards (PCBs) to create electrical interconnections between functional components and the interconnecting circuitry in the PCBs (leads-pads). The component leads must be accurately immersed in the solder paste previously deposited on the PCB pads. The next step after component placement is soldering.
Automation technicians repair and maintain the computer-controlled systems and robotic devices used within industrial and commercial facilities to reduce human intervention and maximize efficiency. Their duties require knowledge of electronics, mechanics and computers. Automation technicians perform routine diagnostic checks on automated systems, monitor automated systems, isolate problems and perform repairs. If a problem occurs, the technician needs to be able to troubleshoot the issue and determine if the problem is mechanical, electrical or from the computer systems controlling the process. Once the issue has been diagnosed, the technician must repair or replace any necessary components, such as a sensor or electrical wiring. In addition to troubleshooting, Automation technicians design and service control systems ranging from electromechanical devices and systems to high-speed robotics and programmable logic controllers (PLCs). These types of systems include robotic assembly devices, conveyors, batch mixers, electrical distribution systems, and building automation systems. These machines and systems are often found within industrial and manufacturing plants, such as food processing facilities. Alternate job titles include field technician, bench technician, robotics technician, PLC technician, production support technician and maintenance technician.
PLC technicians design, program, repair, and maintain programmable logic controller (PLC) systems used within manufacturing and service industries ranging from industrial packaging to commercial car washes and traffic lights.
The HAHN Group GmbH is a conglomerate of companies that specialize in industrial automation and robotics. The headquarters are located in Rheinböllen, Germany.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
