Rakaia railway accident

Last updated

Carriage damaged in the collision Rakaia Railway collision.jpg
Carriage damaged in the collision
Rakaia railway accident
Details
Date11 March 1899
Location Rakaia, South Island
Country New Zealand
Line Main South Line
Operator New Zealand Railways Department
Incident typeCollision
CauseExcessive speed
Inadequate brakes and signals
Statistics
Trains2
Deaths4

The Rakaia railway accident at Rakaia, Canterbury, New Zealand on the evening of Saturday, 11 March 1899 occurred when the second of two excursion trains returning from Ashburton to Christchurch ran into the rear of the first at the Rakaia Railway Station, killing four passengers. While due to excessive speed, the accident resulted in overdue improvements by New Zealand Railways to signalling and braking.

Contents

Background

Rakaia was an intermediate station on the single-track Main South Line between Ashburton and Christchurch, with a branch line to Methven. Two excursion trains carrying about 3000 workers and families from the Islington Freezing Works (abattoir) in Christchurch had been to Ashburton for their annual picnic. The first train had two locomotives and 30 carriages, and the second had one locomotive and 14 carriages plus two wagons. The first train left Ashburton at 6.05 pm. The second train left 20 minutes late at 6.35 pm., and the chief guard (William Climpson) was left on the platform. The two trains had to wait at Rakaia for the regular Christchurch-Ashburton train, and a Methven branch train was waiting on the branch line south of Rakaia Station. Conditions were wet and unpleasant, with driving rain and a south-west gale.

Accident

Damaged first train carriages Damaged carriages - Rakaia railway accident 1898.jpg
Damaged first train carriages

The second train was trying to make up time, and should have stopped short of the Rakaia station. But the driver (Charles Carter) did not brake until he saw the hand-held light of a station clerk, and the brakes skidded on the wet rails. The guard (J. Curson) of the first train saw the second train approaching fast, and signalled the drivers (William Hyland and Gardiner) to move the first train. Though the first train only had time to move two coach lengths, this reduced the damage. The engine of the second train ploughed into the back of the guard's van of the first train, causing it to cut 14 feet (4.3 m) into the next carriage while the third carriage mounted the second carriage to a distance of about 8 feet (2.4 m).

Casualties

Four passengers, three young women and a child, were killed and 22 were injured.

Aftermath

The Inquest jury found Carter was negligent in approaching the station too fast, though also criticising the lack of fixed signals at a station where five passenger trains met. Carter was then acquitted of manslaughter in the Christchurch Supreme Court, but was dismissed after a Royal Commission of Inquiry found he was negligent in not observing the regulations governing an approach to a station. But he was "scapegoat for a railway system suffering from severe growing pains, using operational methods that had not kept pace with increased traffic" (Conly & Stewart, page 77).

The accident led to the fitting of air brakes to rolling stock and improved signalling. Only the locomotives (UB class) had been fitted with air brakes, with hand-operated brakes in the guard’s van at the rear, and Rakaia station had no fixed signals.

So Westinghouse Continuous Air Brakes were fitted to rolling stock, and interlocking signals installed, plus Tyer's tablet machines on single lines (most NZR lines were single track).

While improvements were on the way (and the first signals engineer (H. J. Wynne) was appointed in 1900), the accident contributed to the remarkably rapid expansion of Tyer's block (tablet) working from 1901. [1]

Related Research Articles

The Armagh rail disaster happened on 12 June 1889 near Armagh, County Armagh, in Ireland, when a crowded Sunday school excursion train had to negotiate a steep incline; the steam locomotive was unable to complete the climb and the train stalled. The train crew decided to divide the train and take forward the front portion, leaving the rear portion on the running line. The rear portion was inadequately braked and ran back down the gradient, colliding with a following train.

<span class="mw-page-title-main">Tangiwai disaster</span> 1953 railway accident in New Zealand

The Tangiwai disaster occurred at 10:21 p.m. on 24 December 1953 when a railway bridge over the Whangaehu River collapsed beneath an express passenger train at Tangiwai, North Island, New Zealand. The locomotive and the first six carriages derailed into the river, killing 151 people. The subsequent board of inquiry found that the accident was caused by the collapse of the tephra dam holding back nearby Mount Ruapehu's crater lake, creating a rapid mudflow (lahar) in the Whangaehu River, which destroyed one of the bridge piers at Tangiwai only minutes before the train reached the bridge. The volcano itself was not otherwise erupting at the time. The disaster remains New Zealand's worst rail accident.

<span class="mw-page-title-main">Railway preservation in New Zealand</span>

Railway preservation in New Zealand is the preservation of historically significant facets of New Zealand's rail transport history. The earliest recorded preservation attempt took place in 1925, although the movement itself did not start properly until 1960. New Zealand appears to have a higher proportion of organized railway enthusiasts per 1,000 of population than any other part of the world.

<span class="mw-page-title-main">Abermule train collision</span>

The Abermule train collision was a head-on collision which occurred at Abermule, Montgomeryshire, Wales on Wednesday 26 January 1921, killing 17 people. The crash arose from misunderstandings between staff which effectively over-rode the safe operation of the Electric Train Tablet system protecting the single line. A train departed carrying the wrong tablet for the section it was entering and collided with a train coming the other way.

<span class="mw-page-title-main">Penistone rail accidents</span> List of rail accidents in Penistone South Yorkshire, England

Over the latter years of the 19th and early years of the 20th centuries, Penistone in Yorkshire gained a name as an accident black-spot on Britain's railway network; indeed, it could be said to hold the title of the worst accident black-spot in the country. The main line through the town was the Woodhead route of the Manchester, Sheffield and Lincolnshire Railway between Sheffield Victoria and Manchester, London Road. The line was heavily graded with a summit some 400 yards inside the eastern portal of the Woodhead tunnel.

<span class="mw-page-title-main">Main South Line</span> Railway line in New Zealand

The Main South Line, sometimes referred to as part of the South Island Main Trunk Railway, is a railway line that runs north and south from Lyttelton in New Zealand through Christchurch and along the east coast of the South Island to Invercargill via Dunedin. It is one of the most important railway lines in New Zealand and was one of the first to be built, with construction commencing in the 1860s. At Christchurch, it connects with the Main North Line to Picton, the other part of the South Island Main Trunk.

The Methven Branch was a branch line railway that was part of New Zealand's national rail network in Canterbury. It opened in 1880 and operated until 1976.

The Southerner was a passenger express train in New Zealand's South Island between Christchurch and Invercargill along the South Island Main Trunk, that ran from 1970 to 2002. It was one of the premier passenger trains in New Zealand and its existence made Invercargill the southernmost passenger station in the world.

The Railway Enthusiasts Society Incorporated is a New Zealand railway enthusiast society formed on 17 July 1958. RES formed the Glenbrook Vintage Railway (GVR) in 1968, with GVR now forming a separate charitable trust.

<span class="mw-page-title-main">Glenbrook Vintage Railway</span>

The Glenbrook Vintage Railway (GVR) is a heritage steam railway in Glenbrook, New Zealand.

<span class="mw-page-title-main">New Zealand EW class locomotive</span>

The New Zealand EW class locomotive was a type of electric locomotive used in Wellington, New Zealand. The classification "EW" was due to their being electric locomotives allocated to Wellington. For two decades until the advent of the DX class they were the most powerful locomotives in New Zealand.

The Darlington rail accident occurred on the evening of 27 June 1928 when a parcels train and an excursion train collided head on at Darlington Bank Top railway station in County Durham, England. The accident was caused by the parcels train driver passing a signal at danger, due to misunderstanding the signalling layout in an unfamiliar part of the station. This accident resulted in the deaths of 25 people and the serious injury of 45 people.

<span class="mw-page-title-main">Cross Creek railway station</span> Defunct railway station in New Zealand

Cross Creek railway station was the base of operations for the Rimutaka Incline, a Fell railway over the Remutaka Ranges, and part of the original Wairarapa Line between Upper Hutt and Featherston in the Wellington region of New Zealand's North Island. The station was between Pigeon Bush and Summit stations on the Wairarapa Line. The station was bypassed when the Rimutaka Tunnel was opened.

Tyer's Electric Train Tablet system is a form of railway signalling for single line railways used in several countries; it was first devised in Great Britain by engineer Edward Tyer after the Thorpe rail accident of 1874, which left 21 people dead. It was used in New Zealand for close to 100 years until June 1994. The system used a hard disk called a tablet, a form of token.

<span class="mw-page-title-main">Round Oak rail accident</span>

The Round Oak railway accident happened on 23 August 1858 between Brettell Lane and Round Oak railway stations, on the Oxford, Worcester and Wolverhampton Railway. The breakage of a defective coupling caused seventeen coaches and one brake van, containing about 450 passengers, of an excursion train to run backwards down the steep gradient between the stations, colliding with a following second portion of the excursion. 14 passengers were killed and 50 injured in the disaster. In the words of the Board of Trade accident inspector, Captain H. W. Tyler, it was at the time "decidedly the worst railway accident that has ever occurred in this country".

The Slough rail accident happened on 16 June 1900 at Slough railway station on the Great Western Main Line when an express train from London Paddington to Falmouth Docks ran through two sets of signals at danger, and collided with a local train heading for Windsor & Eton Central. Five passengers were killed; 35 were seriously injured, and 90 complained of shock or minor injuries

The Ferrymead 125 celebration was an event to celebrate 125 years of Rail transport in New Zealand. The event was held over a week from 17 to 24 October 1988, with trains running in, and to and from Christchurch.

<span class="mw-page-title-main">Railway signalling in New Zealand</span>

The first railway line in New Zealand was the line from Christchurch to Ferrymead opened in 1863. Under the “Grand Go-ahead Policy” of public works instituted by Sir Julius Vogel in 1870 the network was rapidly expanded. Initially lines went from the main town and port to the rural hinterland, but the line between the cities of Christchurch and Dunedin section of the South Island Main Trunk Railway opened in 1878. The New Zealand Railways Department was established in 1876, and the rail network was then run by the central government rather than by provincial governments. Signalling installation was handled by district engineers in the maintenance branch. The Rakaia rail accident in 1899 when four passengers were killed showed the deficiencies in railway signalling and braking; Rakaia did not have fixed signals, and rolling stock apart from locomotives did not have air brakes. But those lines with heavier traffic already had block working installed. The first signalling and interlocking engineer had already been appointed in 1899 at a salary of £400; Arthur H. Johnson, who had “considerable experience in England and America” and who was to design and develop a uniform system of interlocking points and signals. <!—NZ Herald 23 May 1898 --> But he resigned in 1899, and returned to England c1901. He was replaced by Henry John Wynne from 1900; with staff of a chief signal inspector in Wellington and several regional signal inspectors. Wynne retired in 1929. Wynne was replaced by Guy Wilfred Wyles (1887-1947) as Signalling and electrical engineer. Wyles had started with Sykes Interlocking Co in London. He married into Wynn’s family, and died of peritonitis three months before his retirement. The first three engineers all trained in England. Signalling in New Zealand was based on British practice for 60 years until about 1922, when it became “essentially indigenous” – partly British with two-aspect mechanical signalling and partly American with automatic three-aspect signalling using so-called ‘”speed’ indicators.

References


  1. Heine 2000, pp. 1, 2, 14.