Rate-of-return regulation (also cost-based regulation) is a system for setting the prices charged by government-regulated monopolies, such as public utilities. It attempts to set prices at efficient (non-monopolistic, competitive) levels [1] equal to the efficient costs of production, plus a government-permitted rate of return on capital. [2]
Rate-of-return regulation has been criticized because it encourages cost-padding and because if the rate is set too high, it encourages regulated firms to adopt capital-labor ratios that are too high. That is known as the Averch–Johnson effect, or simply "gold-plating." Under rate-of-return regulation, regulated monopolies have no incentive to minimize their capital purchases, since prices are set equal to their costs of production.[ citation needed ]
Rate-of-return regulation was dominant in the US for a number of years in the government regulation of utility companies and other natural monopolies. Such companies, if not regulated, could easily charge far higher rates since consumers would pay any price for essential goods such as electricity or water.
Rate-of-return regulation is considered fair because it gives the company the opportunity to recover the costs of serving their customers while protecting consumers from paying exorbitant prices. Under this method of regulation, government regulators examine the firm's rate base, cost of capital, operating expenses, depreciation expenses and taxes in order to estimate the total revenue needed for the firm to fully recover its expenses.
Regulators combine a company's expenses and cost of capital to calculate a revenue requirement. This revenue requirement becomes the target revenue for setting prices. [3] [4]
The goal of rate-of-return regulation is for the regulator to evaluate the effects of different price levels on a public utility's potential earnings, protect consumers and provide the utility the opportunity to receive a "fair" rate of return on its investment. There are five criteria utilized by regulators to assess the suitable rate of return for a firm.
Rate-of-Return regulation was mainly used due to its ability to be sustainable in the long-term and resistant to changes in the company's conditions as well as its popularity among investors. While regulation of this type prevents monopolies with the potential to make large profits from doing so, such as electricity companies, it provides stability. Investors will not make as large dividends off of regulated utility companies; however, they will be able to make fairly constant, substantial returns despite fluctuations in the economy or firm composure. Investor risk is minimized since the regulator's prudence in price setting is constrained by the method used to set the regulation rate. Therefore, investors can depend on consistency, which can be an attractive offer, especially in a volatile world market.
Furthermore, regulation of this sort protects the firm from negative public opinion while providing the consumer with ease of mind. Throughout history, due to their large profits, public opinion has turned against monopolies, which eventually resulted in severe anti-trust laws in the early 20th century. Unregulated monopolies such as Standard Oil that pulled vast profits quickly became the subjects of negative public opinion, the original source of regulation of monopolies. With rate-of-return regulation, consumers can rely on the government to ensure that they are paying fair prices for their electricity and other regulated services, and not feeding into a business of trusts and greed.
The central problem with rate-of-return regulation, the reason most countries with economic regulation have switched to alternate methods of regulating such firms,[ citation needed ] is that rate-of-return regulation does not provide strong incentives for regulated firms to operate efficiently. The main form of this weakness is the Averch-Johnson effect.
Firms regulated in this manner may engage in disproportionate capital accumulation, which in turn will heighten the price level allotted by the government regulator, raising the firm's short-term profits. Unnecessary capital expenditures and operating expenses would increase the firm's revenue requirement (R) as a result of both an increase in operating expenses (E) and depreciation costs (d). Depreciation costs rise due to the fact that as a firm obtains more capital, that physical capital will depreciate over time, thereby raising the overall depreciation cost and their regulated price level as allocated by the government.
The right of states to prescribe rates was affirmed in the United States Supreme Court case of Munn v. Illinois of 1877. This case generally allowed states to regulate certain businesses and practices within their borders, including railroads, which had risen to substantial power at the time. This case was one of six that were later dubbed the "Granger Cases", all concerning the proper degree of government regulation on private industry.
While the political sentiment of the early 20th century was increasingly anti-monopoly and anti-trust, government officials recognized the need for some goods and services to be provided by monopolies. In specific cases, a monopolistic economic model is more efficient than a perfectly competitive model. This type of firm is called a "Natural monopoly" due to the fact that the cost-technology of the industry is markedly high, suggesting that it is more effective for only one or a few firms to dominate production. In a monopolistic market, one or several firms can make the large investment necessary, and in turn provide a large enough percentage of the output to cover the costs of their large initial investment. In a competitive market, numerous firms would be required to spend large sums on the necessary capital only to produce a small quantity of output, thereby sacrificing economic efficiency.
The system of rate setting was developed through a series of Supreme Court cases beginning with the Smyth v. Ames case in 1898. In this so-called "Maximum Freight Case", the Supreme Court defined the constitutional limits of governmental power to set railroad utility rates. The Court stated that regulated industries had a right to "fair return." This was later overturned in the Federal Power Commission v. Hope Natural Gas Company case, but it was important to the development of rate-of-return regulation and more generally, to the practice of government regulation of private industry.
As the concept of rate-of-return regulation spread throughout the anti-trust leaning America, the question of "what profit should investors receive?" became the main decisive issue. This was the question the Hope case set out to answer in 1944.
Failing prices in the late 19th century raised the issue of whether profit should be based on the amount the investors originally invested in assets years earlier, or on the lower current asset value resulting from a drop in overall price level. The Hope case settled on a compromise for asset valuation. With respect to debt capital, Hope accepted the original historic cost as reasonable for valuating the debt portion of the asset rate base and allowing the historically agreed upon interest rate as its rate of return. However, with respect to equity capital, Hope determined that the current return value would be acceptable. Therefore, asset valuation was to be calculated by regulators based on a combination of historical cost and current return value.
Rate-of-return regulation was primarily used in the United States to regulate utility companies that provide goods such as electricity, gas, telephone service, water, and television cable to the general public. Despite its relative success in regulating such companies, rate-of-return regulation was gradually replaced in the late 20th century by new, more efficient forms of regulation such as Price-cap regulation and Revenue-cap regulation. Price-cap regulation was developed in the 1980s by British Treasury economist Stephen Littlechild and was gradually incorporated globally into monopoly regulations. Price-cap regulation adjusts firm prices according to a price cap index which reflects the inflation rate in the economy generally, efficiencies a specific firm is able to utilize relative to the average firm in the economy, and the inflation in a firm's output prices relative to the average firm in the economy. Revenue-cap regulation is a similar means of regulating monopolies, except instead of prices being the regulated variable, regulators set revenue limits. These new forms of regulation gradually replaced rate-of-return regulation in the American and global economies. While rate-of-return regulation is very susceptible to the Averch-Johnson effect, new forms of regulation avoid this loophole by using indexes to properly evaluate firm efficiency and use of resources.
Microeconomics is a branch of economics that studies the behavior of individuals and firms in making decisions regarding the allocation of scarce resources and the interactions among these individuals and firms. Microeconomics focuses on the study of individual markets, sectors, or industries as opposed to the economy as a whole, which is studied in macroeconomics.
A monopoly is a market in which one person or company is the only supplier of a particular good or service. A monopoly is characterized by a lack of economic competition to produce a particular thing, a lack of viable substitute goods, and the possibility of a high monopoly price well above the seller's marginal cost that leads to a high monopoly profit. The verb monopolise or monopolize refers to the process by which a company gains the ability to raise prices or exclude competitors. In economics, a monopoly is a single seller. In law, a monopoly is a business entity that has significant market power, that is, the power to charge overly high prices, which is associated with unfair price raises. Although monopolies may be big businesses, size is not a characteristic of a monopoly. A small business may still have the power to raise prices in a small industry.
Monopolistic competition is a type of imperfect competition such that there are many producers competing against each other but selling products that are differentiated from one another and hence not perfect substitutes. In monopolistic competition, a company takes the prices charged by its rivals as given and ignores the impact of its own prices on the prices of other companies. If this happens in the presence of a coercive government, monopolistic competition will fall into government-granted monopoly. Unlike perfect competition, the company maintains spare capacity. Models of monopolistic competition are often used to model industries. Textbook examples of industries with market structures similar to monopolistic competition include restaurants, cereals, clothing, shoes, and service industries in large cities. The "founding father" of the theory of monopolistic competition is Edward Hastings Chamberlin, who wrote a pioneering book on the subject, Theory of Monopolistic Competition (1933). Joan Robinson's book The Economics of Imperfect Competition presents a comparable theme of distinguishing perfect from imperfect competition. Further work on monopolistic competition was undertaken by Dixit and Stiglitz who created the Dixit-Stiglitz model which has proved applicable used in the sub fields of international trade theory, macroeconomics and economic geography.
A natural monopoly is a monopoly in an industry in which high infrastructural costs and other barriers to entry relative to the size of the market give the largest supplier in an industry, often the first supplier in a market, an overwhelming advantage over potential competitors. Specifically, an industry is a natural monopoly if the total cost of one firm, producing the total output, is lower than the total cost of two or more firms producing the entire production. In that case, it is very probable that a company (monopoly) or minimal number of companies (oligopoly) will form, providing all or most relevant products and/or services. This frequently occurs in industries where capital costs predominate, creating large economies of scale about the size of the market; examples include public utilities such as water services, electricity, telecommunications, mail, etc. Natural monopolies were recognized as potential sources of market failure as early as the 19th century; John Stuart Mill advocated government regulation to make them serve the public good.
In economics, specifically general equilibrium theory, a perfect market, also known as an atomistic market, is defined by several idealizing conditions, collectively called perfect competition, or atomistic competition. In theoretical models where conditions of perfect competition hold, it has been demonstrated that a market will reach an equilibrium in which the quantity supplied for every product or service, including labor, equals the quantity demanded at the current price. This equilibrium would be a Pareto optimum.
In economics, profit maximization is the short run or long run process by which a firm may determine the price, input and output levels that will lead to the highest possible total profit. In neoclassical economics, which is currently the mainstream approach to microeconomics, the firm is assumed to be a "rational agent" which wants to maximize its total profit, which is the difference between its total revenue and its total cost.
A public utility company is an organization that maintains the infrastructure for a public service. Public utilities are subject to forms of public control and regulation ranging from local community-based groups to statewide government monopolies.
In theories of competition in economics, a barrier to entry, or an economic barrier to entry, is a fixed cost that must be incurred by a new entrant, regardless of production or sales activities, into a market that incumbents do not have or have not had to incur. Because barriers to entry protect incumbent firms and restrict competition in a market, they can contribute to distortionary prices and are therefore most important when discussing antitrust policy. Barriers to entry often cause or aid the existence of monopolies and oligopolies, or give companies market power. Barriers of entry also have an importance in industries. First of all it is important to identify that some exist naturally, such as brand loyalty. Governments can also create barriers to entry to meet consumer protection laws, protecting the public. In other cases it can also be due to inherent scarcity of public resources needed to enter a market.
In economics, market power refers to the ability of a firm to influence the price at which it sells a product or service by manipulating either the supply or demand of the product or service to increase economic profit. In other words, market power occurs if a firm does not face a perfectly elastic demand curve and can set its price (P) above marginal cost (MC) without losing revenue. This indicates that the magnitude of market power is associated with the gap between P and MC at a firm's profit maximising level of output. The size of the gap, which encapsulates the firm's level of market dominance, is determined by the residual demand curve's form. A steeper reverse demand indicates higher earnings and more dominance in the market. Such propensities contradict perfectly competitive markets, where market participants have no market power, P = MC and firms earn zero economic profit. Market participants in perfectly competitive markets are consequently referred to as 'price takers', whereas market participants that exhibit market power are referred to as 'price makers' or 'price setters'.
Profit margin is a financial ratio that measures the percentage of profit earned by a company in relation to its revenue. Expressed as a percentage, it indicates how much profit the company makes for every dollar of revenue generated. Profit margin is important because this percentage provides a comprehensive picture of the operating efficiency of a business or an industry. All margin changes provide useful indicators for assessing growth potential, investment viability and the financial stability of a company relative to its competitors. Maintaining a healthy profit margin will help to ensure the financial success of a business, which will improve its ability to obtain loans.
Price-cap regulation is a form of incentive regulation capping the prices that firms in a natural monopoly position may charge their customers. Designed in the 1980s by UK Treasury economist Stephen Littlechild, it has been applied to all privatised British network utilities. It is contrasted with both rate-of-return regulation, with utilities being permitted a set rate of return on capital, and with revenue-cap regulation, with total revenue being the regulated variable.
The Ramsey problem, or Ramsey pricing, or Ramsey–Boiteux pricing, is a second-best policy problem concerning what prices a public monopoly should charge for the various products it sells in order to maximize social welfare while earning enough revenue to cover its fixed costs.
The Averch–Johnson effect is the tendency of regulated companies to engage in excessive amounts of capital accumulation in order to expand the volume of their profits. If companies' profits to capital ratio is regulated at a certain percentage then there is a strong incentive for companies to over-invest in order to increase profits overall. This investment goes beyond any optimal efficiency point for capital that the company may have calculated as higher profit is almost always desired over and above efficiency.
In economics, profit is the difference between revenue that an economic entity has received from its outputs and total costs of its inputs, also known as surplus value. It is equal to total revenue minus total cost, including both explicit and implicit costs.
The building block model is a form of public utility regulation that is common in Australia. Variants of the building block model are currently used in Australia in the regulation of electricity transmission and distribution, gas transmission and distribution, railways, postal services, urban water and sewerage services, irrigation infrastructure, and port access. The Australian Competition & Consumer Commission (ACCC) has stated that it intends to use a version of the building block model to determine indicative access prices for fixed-line telecommunications services. The building block model is so-called because the allowed revenue of the regulated firm is equal to the sum of underlying components or building blocks consisting of the return on capital, the return of capital, the operating expenditure, and various other components such as taxes and incentive mechanisms.
Utility ratemaking is the formal regulatory process in the United States by which public utilities set the prices they will charge consumers. Ratemaking, typically carried out through "rate cases" before a public utilities commission, serves as one of the primary instruments of government regulation of public utilities.
In the utilities industry, the Prudent Investment Rule refers to a series of state standards which determine the fiscal soundness of a utility in the course of rate recovery for recoverable capital costs to be determined by that state’s Public Service Commission (PSC). The determination is established through a series of filings from the utility to the PSC and hearings conducted by the PSC. This occurs during a prudency hearing. The PSC follows these standards to determine if the capital costs were a "prudent investment". To determine the prudency of the investment, the PSC applies the prudent investment test or standard, determining if the costs were reasonable at the time they were incurred, and given the circumstances and what was known or knowable at the time, are to be included in the firm's rates. It is commonly used as an oversight tool by the government to ensure that money invested into a project is being spent as it was intended so the utility may recoup some costs in construction through a recovery in rates, hence the title prudent investment rule. Regulators can consider cases of hidden imprudence, but are required to consider what was known or knowable at the time the decision was made by the PSC.
In microeconomics, a monopoly price is set by a monopoly. A monopoly occurs when a firm lacks any viable competition and is the sole producer of the industry's product. Because a monopoly faces no competition, it has absolute market power and can set a price above the firm's marginal cost.
Performance-based regulation (PBR) is an approach to utility regulation designed to strengthen utility performance incentives. Thus defined, the term PBR is synonymous with incentive regulation. The two most common forms of PBR are award-penalty mechanisms (“APMs”) and multiyear rate plans (“MRPs”). Both involve mathematical formulas that can lower regulatory cost at the same time that they encourage better performance. This constitutes a remarkable potential advance in the “technology” of regulation. Economic theorists whose work has supported the development of PBR include Nobel prize-winning economist Jean Tirole.
This glossary of economics is a list of definitions containing terms and concepts used in economics, its sub-disciplines, and related fields.