The Yellowhead Highway is a major interprovincial highway in Western Canada that runs from Winnipeg to Graham Island off the coast of British Columbia via Saskatoon and Edmonton. It stretches across the four western Canadian provinces of British Columbia, Alberta, Saskatchewan, and Manitoba and is part of the Trans-Canada Highway system and the larger National Highway System, but should not be confused with the more southerly, originally-designated Trans-Canada Highway. The highway was officially opened in 1970. Beginning in 1990, the green and white Trans-Canada logo is used to designate the roadway.
Highway 5 is a 543 km (337 mi) north–south route in southern British Columbia, Canada. Highway 5 connects the southern Trans-Canada route with the northern Trans-Canada/Yellowhead route, providing the shortest land connection between Vancouver and Edmonton. Despite the entire route being signed as part of the Yellowhead Highway, the portion of Highway 5 south of Kamloops is also known as the Coquihalla Highway while the northern portion is known as the Southern Yellowhead Highway. The Coquihalla section was a toll road until 2008.
The Air Force Reserve Officers' Training Corps (AFROTC) is one of the three primary commissioning sources for officers in the United States Air Force and United States Space Force, the other two being the United States Air Force Academy (USAFA) and Air Force Officer Training School (OTS). A subordinate command of the Air University within the Air Education and Training Command (AETC), AFROTC is aligned under the Jeanne M. Holm Center for Officer Accessions and Citizen Development at Maxwell AFB, Alabama. The Holm Center, formerly known as the Air Force Officer Accession and Training Schools (AFOATS), retains direct responsibility for both AFROTC and OTS.
Alberta Provincial Highway No. 2A is the designation of six alternate routes off Highway 2 in Alberta, Canada. In general, these are original sections of Highway 2, such as the southern portion of Macleod Trail in Calgary. They passed through communities before limited-access freeways were built to shorten driving distance, accommodate heavier volumes and to bypass city traffic. Portions of the alignment of Highway 2A follow the route of the former Calgary and Edmonton Trail.
Canadian Senate divisions refers to two aspects of the Senate of Canada. First, it refers to the division of Canada into four regional Senate divisions of 24 senators each, as set out in section 22 of the Constitution Act, 1867. The four regions are the Western Provinces, Ontario, Quebec and the Maritimes. These regions are intended to serve the Senate's purpose of providing regional representation in the Parliament of Canada, in contrast to the popular representation that the House of Commons is intended to provide. While not within any of the original four Senate divisions, Senate seats are also allocated to Newfoundland and Labrador and the three territories. The four divisions can be expanded when the need arises to have an extra two senators appointed to each regional division.
Alberta Provincial Highway No. 22, commonly referred to as Highway 22 and officially named Cowboy Trail, is a 584-kilometre (363 mi) highway in the Canadian province of Alberta. It generally parallels Highway 2, beginning in the foothills of southern Alberta at Highway 3 near Lundbreck Falls. It proceeds north along the eastern slopes of the Rocky Mountains passing through the foothills and ranch country to the aspen parkland of northern Alberta, ending at Highway 18 near Mayerthorpe.
Alberta Provincial Highway No. 39, commonly referred to as Highway 39, is an east–west highway in central Alberta, Canada. It extends from Highway 22, approximately 13 kilometres (8 mi) east of Drayton Valley, to Leduc where it ends at Highway 2. Highway 39 is about 91 kilometres (57 mi) long.
The Association of Professional Engineers and Geoscientists of Alberta (APEGA) is an engineering society that regulates the practices of professional engineering and geoscience in Alberta.
Certified engineering technologist (CET) is a Canadian professional certification awarded on the basis of academic qualification and work experience. Abbreviated as C.E.T., most Canadian provincial engineering and applied science technology associations offer this certification. Certification is voluntary and does not represent a provincial regulatory requirement or a statutory required license.
The engineering design process, also known as the engineering method, is a common series of steps that engineers use in creating functional products and processes. The process is highly iterative – parts of the process often need to be repeated many times before another can be entered – though the part(s) that get iterated and the number of such cycles in any given project may vary.
A professional technologist (P.Tech) is a class of certification of engineering technologist and professional technologist in Canada and Malaysia respectively.
Alberta Innovates (AI) is a Canadian provincial crown corporation created and funded by the government of Alberta, responsible for promoting innovation in the province. Its appointed Board of Directors is accountable to the Minister of Jobs, Economy and Innovation. AI created from a variety of predecessor research and development organizations including the Alberta Research Council, the Alberta Heritage Foundation for Medical Research and the Alberta Energy Research Institute.
The Association of Science and Engineering Technology Professionals of Alberta (ASET), is a professional association located in Alberta, Canada. The organization represents applied science and engineering technology professionals in industry, educational institutions, the public and the government. ASET also evaluates the qualifications of individuals who voluntarily apply for certification and issues professional credentials accordingly. It also delivers a number of benefits and services to its members and their employers.
Alberta Provincial Highway No. 16X, commonly referred to as Highway 16X, is the designation of one former and three proposed routes off Highway 16 in Alberta, Canada. The former section was a 36 km (22 mi) east–west provincial highway in Edmonton Capital Region, that existed for approximately 20 years between the 1970s and 1997 and is now part of Highway 16. Right of way is set aside around Hinton, Edson, and Lloydminster that is presently designated as Highway 16X.
Alberta Provincial Highway No. 57, commonly referred to as Highway 57, was a highway in central Alberta, Canada that served the Town of Drayton Valley and existed between the 1950s and 1979. It is now part of Highway 22 and Highway 39.
Applied science technologist (AScT) is a Canadian professional certification awarded on the basis of academic qualification and work experience. Abbreviated as A.Sc.T., some, but not all, Canadian provincial engineering and applied science technology associations offer this certification.
In Canada, a new occupational category of "technologist" was established in the 1960s in conjunction with an emerging system of community colleges and technical institutes. It was designed to effectively bridge the gap between the increasingly theoretical nature of engineering science degrees and the predominantly practical approach of technician and trades programs. Provincial associations may certify individuals as a professional technologist (P.Tech), certified engineering technologist (C.E.T.), registered engineering technologist (R.E.T.), applied science technologist (AScT) or technologue professionel (T.P.). These provincial associations are constituent members of the Canadian Council of Technicians and Technologists (CCTT), which nationally accredits technology programs across Canada through its Canadian Technology Accreditation Board (CTAB). Nationally accredited engineering technology programs range from two to three years in length, depending on province, with two-year programs leading to a C.Tech. certification and three-year programs usually leading to an AScT, CET or RET certification.
The Association of Engineering Technicians and Technologists of Newfoundland and Labrador (AETTNL) is Newfoundland and Labrador's independent certifying body for engineering/applied science technicians and technologists.
COVID Alert was the Exposure Notification service app for the country of Canada. It launched in the province of Ontario on July 31, 2020, and became available in nearly all Canadian provinces by October of that year, excluding Alberta, and British Columbia.
