Rhino Passive Infrared Defeat System

Last updated

The Rhino Passive Infrared Defeat System (also known simply as Rhino) was an early detonation Counter-IED system. It was mounted to the front of a vehicle and used heat to prematurely detonate any hidden improvised explosive devices (IEDs) while the vehicle was at a safe distance away from the blast. [1] [2] It was developed by the Joint Improvised-Threat Defeat Organization (JIEDDO) in 2006 during the war in Iraq to counter the rise of IED-related deaths. [3]

Contents

Inspiration

During the Iraq War, the rising number of troops killed and wounded by underbelly IEDs buried by insurgents in the middle of the road prompted the U.S. military to funnel billions of dollars into the development of several countermeasures to either detect the explosive or minimize the damage. [4] However, the frequent delays in producing and delivering these countermeasures to Iraq lead to shortages in effective IED-defeating technology. As a result, several soldiers on the battlefield ended up improvising their own solutions that took advantage of how the passive infrared sensors on the IEDs reacted to heat signatures. One unnamed soldier proposed mounting a large hair dryer to the front of the vehicle to blow hot air on the road to prematurely set off any hidden IEDs and clear the path. Another soldier supposedly purchased a toaster at a bazaar, plugged the appliance into his Humvee, and attached it to the end of a long pole that was welded to the front of the vehicle. These and other similar ideas led JIEDDO to develop Rhino in 2006, one of their earliest innovations. [5]

The initial design consisted of a glow plug that was placed inside a metal ammunition can, which was then attached to a 10 ft long metal pole with the other end mounted onto the front of a vehicle. [4] The glow plug acted as a heat decoy, which triggered any nearby IED’s infrared sensor prematurely and fired the copper explosively formed penetrator (EFP) slug at the Rhino instead of the vehicle behind it. The countermeasure proved to be a success at the time as U.S. forces found that the Rhino could not only take the impact of an EFP but also, in rare cases, continue working afterwards. [5]

Changes

Despite the favorable outcome of the Rhino’s initial run, insurgents soon began making modifications to the IEDs to account for this countermeasure. [4] Within six weeks, the aim of the EFP was adjusted so that the slug was fired 10 feet back from the Rhino to hit the vehicle. In response, JIEDDO and researchers at the Army Research Laboratory in Adelphi, Maryland designed and developed the Rhino II, which came with a telescoping pole whose length could be adjusted to change the position of the heat decoy. [6] More than 16,000 Rhino II devices were deployed to the U.S. Army and Marines in Iraq by the end of 2008, costing around $1,800 each to produce. [3] [4] Before long, the Rhino II was featured on almost every U.S. vehicle in Iraq. However, by 2010, newer IEDs began to use high-powered radio waves from coalition jammers instead of heat signatures to set off the EFP as a countermeasure against Rhino II. [5] As of June 2018, more than 34,000 Rhino gadgets have been deployed to U.S. troops overseas. [7]

Related Research Articles

<span class="mw-page-title-main">Shaped charge</span> Explosive with focused effect

A shaped charge is an explosive charge shaped to focus the effect of the explosive's energy. Different types of shaped charges are used for various purposes such as cutting and forming metal, initiating nuclear weapons, penetrating armor, or perforating wells in the oil and gas industry.

<span class="mw-page-title-main">Improvised explosive device</span> Unconventionally produced bomb

An improvised explosive device (IED) is a bomb constructed and deployed in ways other than in conventional military action. It may be constructed of conventional military explosives, such as an artillery shell, attached to a detonating mechanism. IEDs are commonly used as roadside bombs, or homemade bombs.

<span class="mw-page-title-main">Anti-tank mine</span> Type of land mine designed to destroy tanks

In anti-tank warfare, an anti-tank mine is a type of land mine designed to damage or destroy vehicles including tanks and armored fighting vehicles.

<span class="mw-page-title-main">Insurgency weapons and tactics</span> Firearms etc. in guerrilla warfare

Insurgency weapons and tactics (IWAT) are weapons and tactics, most often involving firearms or explosive devices, intended for use by insurgents to engage in guerrilla warfare against an occupier, or for use by rebels against an established government. One type of insurgency weapon are "homemade" firearms made by non-professionals, such as the Błyskawica (Lightning) submachine gun produced in underground workshops by the Polish resistance movement. One weapon that is part of the conventional military arsenal but which has been taken up to great effect by insurgents, is the RPG. Two examples of an improvised weapon used by insurgents would be the improvised explosive devices used in Iraq and the Molotov cocktails used against vehicles and tanks. Two tactics used by many insurgents are assassinations and suicide bomb attacks. The latter tactic is used when an insurgent has a bomb strapped to them or in their car, which provides a low-tech way for insurgents to get explosives close to critical enemy targets.

An active protection system (APS) is a system designed to actively prevent certain anti-tank weapons from destroying a vehicle.

<span class="mw-page-title-main">Explosively formed penetrator</span> Shaped charge designed to penetrate armor effectively

An explosively formed penetrator (EFP), also known as an explosively formed projectile, a self-forging warhead, or a self-forging fragment, is a special type of shaped charge designed to penetrate armor effectively, from a much greater standoff range than standard shaped charges, which are more limited by standoff distance. As the name suggests, the effect of the explosive charge is to deform a metal plate into a slug or rod shape and accelerate it toward a target. They were first developed as oil well perforators by American oil companies in the 1930s, and were deployed as weapons in World War II.

<span class="mw-page-title-main">Zeus-HLONS</span>

The Zeus-HLONS, also known as HMMWV, Laser Ordnance Neutralization System, is a solid-state laser weapon which is used by the U.S. military in order to neutralize surface land mines and unexploded ordnance. The Zeus-HLONS system was a co-operative effort between SPARTA, Inc. and Naval EOD Technology Division to demonstrate that a moderate-power commercial solid state laser (SSL) and beam control system could be integrated onto a Humvee and used to clear surface mines, improvised explosive devices (IEDs), or unexploded ordnance from supply routes and minefields.

<span class="mw-page-title-main">MRAP</span> Armoured vehicle designed to survive IED explosion

Mine-Resistant Ambush Protected is a term for United States military light tactical vehicles produced as part of the MRAP program that are designed specifically to withstand improvised explosive device (IED) attacks and ambushes. The United States Department of Defense MRAP program began in 2007 as a response to the increased threat of IEDs during the Iraq War. From 2007 until 2012, the MRAP program deployed more than 12,000 vehicles in the Iraq War and War in Afghanistan.

The tactics of the Iraqi insurgency have varied widely. Insurgents have targeted U.S. forces and Iraqi government forces using improvised explosive devices, ambushes, snipers, and mortar and rocket fire, in addition to using car bombs, kidnappings or hostage-taking, and assassinations.

An Operation Forsythe Park in Albu Bali, located 15 kilometers northeast of Ramadi, was completed on Wednesday 5 May 2007 in Ramadi, Iraq by approx 450 Iraqi Security and Coalition Forces.

<span class="mw-page-title-main">Husky VMMD</span> South African military light tactical vehicle

The Husky VMMD is a configurable counter-IED MRAP vehicle, developed by South African-based DCD Protected Mobility and American C-IED company Critical Solutions International. Designed for use in route clearance and de-mining operations, the Husky is equipped with technologies to help detect explosives and minimise blast damage.

<span class="mw-page-title-main">Joint Improvised-Threat Defeat Organization</span>

The Joint Improvised-Threat Defeat Organization (JIDO) is a combat support organization of the U.S. Department of Defense (DoD) organization under the Defense Threat Reduction Agency (DTRA) that deals with improvised threats such as the improvised explosive device (IEDs) and small unmanned aerial systems (sUASs). JIDO was born from the Joint IED Defeat Organization (JIEDDO) established in 2006, which focused on IEDs. JIDO's mission is to "enable Department of Defense actions to counter improvised threats with tactical responsiveness and anticipatory acquisition in support of combatant commanders' efforts to prepare for, and adapt to, battlefield surprise." This mission supports counter-terrorism, counter-insurgency and other related mission areas including Counter-IED.

<span class="mw-page-title-main">Chemring Group</span> United Kingdom business

Chemring Group plc is a global business providing a range of advanced technology products and services to the aerospace, defence and security markets. Chemring has extensive operations in the Americas, Europe, Middle East and Asia.

<span class="mw-page-title-main">Frag Kit 6</span>

Frag Kit 6 is a vehicular armor upgrade kit developed by the U.S. Army Research Laboratory to defeat explosively formed projectiles (EFP), a type of armor penetrator often utilized in improvised explosive devices (IED). It is designed to be added on armored vehicles such as the MRAP and unarmored Humvee. Like the Chobham armor, the exact materials and the way it works is classified information.

<span class="mw-page-title-main">Thor III</span> Counter radio-controlled IED jamming device

The THOR III is man-portable, counter-radio-controlled improvised explosive device (IED) jammer built by Sierra Nevada Corp, designed to counter specifically Radio Controlled Improvised Explosive Devices (RCIED). It was employed by the U.S. Army, U.S. Marine Corps, and partnered Afghan National Army soldiers in Afghanistan. Sierra Nevada received the initial contract in December 2007. This system uses three transceivers mounted on backpacks to jam radio-controlled IEDs; each of the three different transceivers jams a different frequency bandwidth. Power requirements: Low-band, 2.5amps; Mid-band, 4.0amps; High-band, 5.0amps.

<span class="mw-page-title-main">Michael D. Barbero</span> United States Army general

Michael Douglas Barbero is a retired United States Army Lieutenant General and consultant.

<span class="mw-page-title-main">Counter-IED equipment</span>

Counter-IED equipment are created primarily for military and law enforcement. They are used for standoff detection of explosives and explosive precursor components and defeating the Improvised Explosive Devices (IEDs) devices themselves as part of a broader counter-terrorism, counter-insurgency, or law enforcement effort.

The Armor Survivability Kit (ASK) is an armor kit developed by the U.S. Army Research Laboratory (ARL) in 2003 to protect vehicles like the Humvee from small arms, explosive device fragments, and rocket-propelled grenades (RPGs).

U.S. Army Research Laboratory (ARL) research on MRAP Armor Weight Reduction Spiral (MAWRS) program resulted in armor technologies 40 percent lighter, with technologies fielded on more than 10,000 MRAP vehicles. Dozens of spin-out designs were provided to most major combat and tactical wheeled-vehicles program in production.

The Improvised Explosive Device Countermeasure Equipment (ICE) is a vehicle-mounted electronics-based jamming system that uses low-power radio frequency energy to thwart enemy improvised explosive devices (IEDs). The radio frequency energy it emits blocks the signals broadcast by radio-controlled detonators, such as cell phones and cordless telephones, that would otherwise trigger the hidden IED to explode. ICE was developed by the Army Research Laboratory (ARL) at White Sands Missile Range and the Physical Science Laboratory (PSL) at New Mexico State University in 2004 to counter the rising IED threat in Iraq. Due to the urgent demand for counter-IED equipment, ICE was designed and built within three weeks and was provided to troops in less than six months after the project started.

References

  1. ↑ Borjes, Karl; Lewis, John; Minus, Joseph (October 2008). "PEO Ammunition — We Make the Ammo, You Make the Difference" (PDF). Army AL&T Magazine. Retrieved June 26, 2018.
  2. ↑ McCarthy, Liz; Kaplun, Michael (August 2009). "PM CCS Offers Revolutionary Networked Munition Systems" (PDF). Infantry. 98 (4): 9–11.
  3. 1 2 Conderre, Michael (Spring 2009). "Strong the Force Is..." (PDF). CBRNe World. Retrieved June 26, 2018.
  4. 1 2 3 4 Atkinson, Rick (October 2, 2007). "'You can't armor your way out of this problem'". The Washington Post. ISSN   0190-8286 . Retrieved 2018-06-26.
  5. 1 2 3 Higginbotham, Adam (July 28, 2010). "U.S. Military Learns to Fight Deadliest Weapons". WIRED. Retrieved 2018-06-26.
  6. ↑ Army Research Laboratory (2017). History of the U.S. Army Research Laboratory. p. 75. ISBN   9780160942310.
  7. ↑ "Rhino Convoy Protection Device". www.pica.army.mil. Retrieved 2018-06-26.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.