Richard 125 Commuter

Last updated
125 Commuter
Role Homebuilt aircraft
National origin United States
ManufacturerC.H. Richard Company
DesignerCharles H Richard
Number built2
Variants Richard 150 Commuter

The Richard 125 Commuter is a two-passenger homebuilt aircraft design. [1]

Contents

Development

The 125 Commuter was introduced in 1969, and a second refined prototype was built in 1972. The aircraft used a stressed skin all aluminum structure at a time when most homebuilts used wood or tube and fabric construction. The plans were marketed for homebuilt construction by its designer Charles Richard. A 150 hp variant was developed afterward. [2]

Design

The 125 Commuter is a side-by-side passenger strut-braced high wing aircraft with conventional landing gear. The aircraft uses all metal construction. A single control column between the seats acts as a control for either pilot. Fuel is stored in 50 gallon wing tanks. [3]

Variants

Specifications (Richard 125 Commuter)

Data from Sport Aviation

General characteristics

Performance

See also

Aircraft of comparable role, configuration, and era

Related Research Articles

<span class="mw-page-title-main">Aerosport Quail</span> Type of aircraft

The Aerosport Quail is an ultralight aircraft that was designed for home building by Harris Woods. First offered for sale in 1971, by the end of the decade, 375 sets of plans had been sold, with around 26 aircraft under construction and 10 flying.

The Heuberger Sizzler is low-wing, tricycle gear, homebuilt aircraft that was designed by Continental Air Lines engineer Larry Heuberger.

<span class="mw-page-title-main">Tapanee Pegazair-100</span> Canadian homebuilt aircraft

The Pegazair-100 STOL is a two-seat STOL homebuilt aircraft developed in Canada by Tapanee Aviation, Inc. of Mont-Saint-Michel, Quebec.

<span class="mw-page-title-main">Aircraft Technologies Atlantis</span> Type of aircraft

The Aircraft Technologies Atlantis is an American aerobatic homebuilt aircraft, built by Aircraft Technologies of Lilburn, Georgia. The aircraft is supplied as a kit or in the form of plans for amateur construction.

The Eaves Cougar 1 is an American homebuilt aircraft that was designed by Leonard R. Eaves of Oklahoma City, Oklahoma and made available in the form of plans for amateur construction.

The Rogers Sportaire is an American homebuilt aircraft that was designed David M. Rogers and produced by Rogers Aircraft of Riverside, California, introduced in 1959. The aircraft was supplied in the form of plans for amateur construction, but plans are no longer available. Only one was built.

The Adventure Air Adventurer is a family of American homebuilt amphibious flying boats that was designed and produced by Adventure Air of Berryville, Arkansas. When it was available the aircraft was supplied as a kit for amateur construction. The company appears to be out of business.

<span class="mw-page-title-main">Elmwood Christavia Mk IV</span> Canadian homebuilt light aircraft

The Christavia Mk IV (Christ-in-Aviation) is a Canadian homebuilt aircraft that was designed by Ron Mason and produced by Elmwood Aviation of Frankford, Ontario. The aircraft is supplied in the form of plans for amateur construction.

<span class="mw-page-title-main">Collins Dipper</span> American homebuilt aircraft

The Collins Dipper was an American homebuilt flying boat that was designed and produced by Collins Aero of Chadds Ford, Pennsylvania and first flown in 1982. The aircraft was supplied in the form of plans for amateur construction. Only one was built and none remain registered.

The Explorer Ellipse is an American homebuilt aircraft that was designed by Dean Wilson and produced by Explorer Aviation of Grangeville, Idaho. When it was available the aircraft was supplied as a kit for amateur construction.

The Stern ST 87 Vega is a French homebuilt aircraft that was designed by Rene Stern, first flying in July 1992. The aircraft is supplied in the form of plans for amateur construction.

The Mirage Marathon is an American homebuilt aircraft, designed and produced by Mirage Aircraft Corporation of Prescott Valley, Arizona. The aircraft is supplied in the form of plans for amateur construction, with materials kits supplied by Aircraft Spruce & Specialty Co. and Wicks Aircraft Supply as well as some specialized parts supplied by the manufacturer.

<span class="mw-page-title-main">Olympic Desert Eagle</span> American homebuilt aircraft

The Olympic Desert Eagle was an American homebuilt aircraft that was designed and produced by Olympic Ultralights of Port Angeles, Washington. When it was available the aircraft was supplied as a kit for amateur construction.

The Sea Storm is an Italian homebuilt amphibious flying boat that was designed and produced by Storm Aircraft of Sabaudia. Storm Aircraft was originally called SG Aviation srl. When it was available the aircraft was supplied as a kit for amateur construction.

The St Croix Pietenpol Aerial is an American homebuilt aircraft that was designed by Chad and Charles Willie and produced by St Croix Aircraft of Corning, Iowa, first flown in 1977. When it was available the aircraft was supplied in the form of plans for amateur construction, with partial kits available.

The Theiss Speedster is an American Homebuilt ultralight biplane that was designed and produced by Theiss Aviation of Salem, Ohio. When it was available the aircraft was supplied as a quick-build kit for amateur construction.

<span class="mw-page-title-main">Warner Revolution II</span> American homebuilt aircraft

The Warner Revolution II, also marketed as the Space Walker II, is an American homebuilt aircraft that was designed and produced by Warner Aerocraft of Seminole, Florida. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction.

The American Homebuilts John Doe is an American STOL homebuilt aircraft that was designed by Steve Nusbaum and produced by American Homebuilts of Hebron, Illinois, first flown in 1994. When it was available the aircraft was supplied as a kit for amateur construction.

The Bradley BA-200 ATAC was an American homebuilt aircraft that was designed by Bradley Aerospace of Chico, California, introduced in the mid-1990s. The aircraft was intended to be supplied as a kit for amateur construction, but is likely that only one was constructed.

<span class="mw-page-title-main">InterPlane Starboy</span> Czech homebuilt aircraft

The InterPlane Starboy was a proposed Czech homebuilt aircraft designed by InterPlane Aircraft of Zbraslavice. The aircraft was intended to be supplied as a complete ready-to-fly-aircraft or as a kit for amateur construction, but none seem to have been built.

References

  1. Air Trails: 76. Winter 1971.{{cite journal}}: Missing or empty |title= (help)
  2. Sport Aviation: 32. April 1972.{{cite journal}}: Missing or empty |title= (help)
  3. "The Richard 125 Commuter". Sport Aviation. June 1969.