Richard Dolby

Last updated

Richard Edwin Dolby, OBE, HonDMet, FREng, FIMMM, HonFWeldI (born 7 July 1938 in Sheffield) is a metallurgist and former Director of Research and Technology at The Welding Institute (TWI) in Cambridge, UK. He is a past President at the Institute of Materials, Minerals and Mining [1] and a current Distinguished Research Fellow at the University of Cambridge Department of Materials Science and Metallurgy. [2]

Contents

Education

Richard Dolby was educated at Northampton Grammar School and, following two years' National Service in the Royal Electrical and Mechanical Engineers, at the University of Cambridge (Selwyn College), Department of Materials Science and Metallurgy where he also gained his PhD.

Career

Richard Dolby's early career began at British Alcan and the General Electric Company, and in 1964 he joined The Welding Institute (British Welding Research Association). Here he worked on metallurgical aspects of HAZ toughness of pressure vessel steels [3] and jointly led pioneering studies into lamellar tearing in welded structural steel. [4] He spent 14 years specialising in metallurgy and carrying out fundamental industrial research [5] in the Materials Department at the Institute, becoming Head of Department in 1978. He was appointed Director, Research and Technology in 1985 until his retirement in 2003 when The Welding Institute hosted a two-day conference [6] in his honour.

The Welding Institute's Richard Dolby-Rolls-Royce Prize is given biennially to young engineers who demonstrate success in, and enthusiasm for, welding, joining and/or materials engineering at an early stage in their career.

Advisory committees and awards

Richard Dolby has held appointments on the UK Technical Advisory Board on the Structural Integrity of High Integrity Plant (TAGSI), the Materials Board of the UK Defence Scientific Advisory Council and various Department of Trade and Industry Committees, as well as the Institute of Materials, Minerals and Mining (IoM3). He was President of the Institute of Materials Minerals and Mining from 2006-2007 and is a past Vice-President of the International Institute of Welding (IIW) where he also served as Chairman of the IIW Technical Management Board and Chairman of the IIW Research Strategy Group.

He was elected a Fellow of the Royal Academy of Engineering in 1987 and awarded the Order of the British Empire in 2000 for his services to research and technology transfer in materials joining. He is a past winner of The Welding Institute's Brooker Award and the Institute of Materials, Minerals and Mining's Bessemer Gold Medal for contributions to the steel industry. He was invited to deliver the Hatfield Memorial Lecture in 1997 and awarded an Honorary Doctorate of Metallurgy at the University of Sheffield in 1998. [7] In 2003 he was presented with the IIW Arata Prize for his contribution to the science of welding and joining.

Related Research Articles

<span class="mw-page-title-main">Frederick Brian Pickering</span> English engineer and metallurgist (1927-2017)

Frederick Brian Pickering, AMet, DMet, FIMMM, CEng, FREng was an English metallurgist. His research and development activities contributed significantly to the creation of stronger and lighter steels.

<span class="mw-page-title-main">Julia King, Baroness Brown of Cambridge</span> British engineer (born 1954)

Julia Elizabeth King, Baroness Brown of Cambridge is a British engineer and a crossbench member of the House of Lords. She is the incumbent chair of the Carbon Trust and the Henry Royce Institute, and was the vice-chancellor of Aston University from 2006 to 2016.

<span class="mw-page-title-main">Peter Gregson (engineer)</span> British research engineer and academic

Sir Peter John Gregson, FREng is a British research engineer and Chair of the Henry Royce Institute. He was previously the Vice-Chancellor of Cranfield University from 2013-202 and President and Vice-Chancellor of Queen's University Belfast from 2004. Prior to that he was deputy Vice-Chancellor at Southampton University from 2000-2004.

Friction welding (FRW) is a solid-state welding process that generates heat through mechanical friction between workpieces in relative motion to one another, with the addition of a lateral force called "upset" to plastically displace and fuse the materials. Because no melting occurs, friction welding is not a fusion welding process, but a solid-state welding technique more like forge welding. Friction welding is used with metals and thermoplastics in a wide variety of aviation and automotive applications.

<span class="mw-page-title-main">Friction stir welding</span>

Friction stir welding (FSW) is a solid-state joining process that uses a non-consumable tool to join two facing workpieces without melting the workpiece material. Heat is generated by friction between the rotating tool and the workpiece material, which leads to a softened region near the FSW tool. While the tool is traversed along the joint line, it mechanically intermixes the two pieces of metal, and forges the hot and softened metal by the mechanical pressure, which is applied by the tool, much like joining clay, or dough. It is primarily used on wrought or extruded aluminium and particularly for structures which need very high weld strength. FSW is capable of joining aluminium alloys, copper alloys, titanium alloys, mild steel, stainless steel and magnesium alloys. More recently, it was successfully used in welding of polymers. In addition, joining of dissimilar metals, such as aluminium to magnesium alloys, has been recently achieved by FSW. Application of FSW can be found in modern shipbuilding, trains, and aerospace applications.

<span class="mw-page-title-main">Institute of Materials, Minerals and Mining</span> UK engineering institution

The Institute of Materials, Minerals and Mining (IOM3) is a UK engineering institution whose activities encompass the whole materials cycle, from exploration and extraction, through characterisation, processing, forming, finishing and application, to product recycling and land reuse. It exists to promote and develop all aspects of materials science and engineering, geology, mining and associated technologies, mineral and petroleum engineering and extraction metallurgy, as a leading authority in the worldwide materials and mining community.

<span class="mw-page-title-main">The Welding Institute</span>

The Welding Institute is a research and technology organisation, with a specialty in welding. It has had headquarters near Cambridge, England, since 1946, and has other facilities across the UK and around the world. TWI works across all industry sectors and in all aspects of manufacturing, fabrication and whole-life integrity management technologies.

<span class="mw-page-title-main">Calvin Blignault</span> South African mechanical engineer (1979–2010)

Calvin Blignault was a South African mechanical engineer.

Robert Baker, FREng, FIMMM (1938–2004) was a British metallurgist and steelmaker.

Frederick Michael Burdekin is a British civil engineer, and emeritus professor at University of Manchester Institute of Science and Technology and the University of Manchester.

<span class="mw-page-title-main">Harshad Bhadeshia</span> Indian-British metallurgist

Sir Harshad"Harry"Kumar Dharamshi Hansraj Bhadeshia is an Indian-British metallurgist and Emeritus Tata Steel Professor of Metallurgy at the University of Cambridge. In 2022 he joined Queen Mary University of London as Professor of Metallurgy.

The A. A. Griffith Medal and Prize is awarded annually by the Institute of Materials, Minerals and Mining in commemoration of Alan Arnold Griffith.

Bhakta B. Rath is an Indian American material physicist and Head of the Materials Science and Component Technology of the United States Naval Research Laboratory (NRL), the corporate research laboratory for the United States Navy and the United States Marine Corps. He is the chief administrative officer for program planning, interdisciplinary coordination, supervision and control of research and is the associate director of research for Materials Science and Component Technology at NRL.

<span class="mw-page-title-main">Ken Mills</span> British chemistry professor

Kenneth Claughan Mills, was head of the Slags group at the National Physical Laboratory and a visiting professor in the Department of Materials at Imperial College London.

Catherine Mary Fiona Rae is a Professor of Superalloys in the Department of Materials at the University of Cambridge. Rae is the Director of the Rolls-Royce UTC in Cambridge. She is known for her expertise in electron microscopy and the behaviour of materials in aerospace applications.

Allan Matthews (1952) is Professor of Surface Engineering and Tribology at The University of Manchester and Director of the Digitalised Surfaces Manufacturing Network.

Rotary friction welding (RFW) one of the methods of friction welding, the classic way of which uses the work of friction to create a not separable weld. Typically one welded element is rotated to the other and forge. The heating of the material is caused by friction work and creates a permanent connection. In this method can be welded the same, dissimilar, or composite and non-metallic materials. The friction welding methods of are often considered as solid-state welding.

<span class="mw-page-title-main">David Knowles (engineer)</span>

Professor David Knowles FREng FIMMM is Professor of Nuclear Engineering at the University of Bristol and Chief Executive of the UK's Henry Royce Institute for advanced materials research. From 2016 to 2019, he was the co-director of the South West Nuclear Hub, and Atkins Fellow. His work focusses primarily on understanding and modelling the degradation mechanisms in metallic materials and their interrelation with the structural integrity of rotating and static equipment in the energy sector.

David Dye is a Professor of Metallurgy at Imperial College London. Professor Dye specialises in fatigue and micromechanics of aerospace and nuclear materials, mainly Ni/Co superalloys, Titanium, TWIP steel, and Zirconium alloys.

<span class="mw-page-title-main">Chinnapat Panwisawas</span> Computational Metallurgist

Chinnapat Panwisawas FIMMM FInstP FIMechE is a metallurgist and engineer based at Queen Mary University of London. Panwisawas' research concentrates on advanced process science and engineering of investment casting laser fusion welding and powder-bed fusion additive manufacturing.

References

  1. Dolby, Richard (April 2006). "Joining Matters". Materials World.
  2. "Distinguished Research Fellows". University of Cambridge Department of Materials Science and Metallurgy. 28 July 2016.
  3. Dolby, Richard (August 1979). "HAZ Toughness of Structural and Pressure Vessel Steels - Improvement and Prediction" (PDF). AWS Welding Journal: Supplement.
  4. Farrar, J.C.M.; Dolby, R.E. (1972). Lamellar tearing in welded steel fabrication. Cambridge: The Welding Institute.
  5. Dolby, R.E. "Selected publications and citations". ResearchGate.
  6. Booth, Geoff (2004). The Richard Dolby Conference: Metals Joining Technology - Where Next?. Cambridge: TWI Ltd. ISBN   1903761026.
  7. "Honorary Graduates" (PDF). University of Sheffield.