 |
 | This article includes a list of general references, but it lacks sufficient corresponding inline citations .(July 2023) |
The Riga was a Latvian moped built in Riga between 1965 and 1992.
| |
| This article includes a list of general references, but it lacks sufficient corresponding inline citations .(July 2023) |
The Riga was a Latvian moped built in Riga between 1965 and 1992.
In the 1960s, the idea of providing people of the Soviet Union with an easy to use, easy to maintain, motorised transport took form. The idea was followed by action and a plan was formed at Riga Engine Factory "Sarkanā zvaigzne". Initially, the Hungarian Dongó, bicycle-mounted auxiliary engine and the Velosolex motorcycle was tested, but these vehicles did not bring the expected success, so they turned their attention toward light motorcycles as they had proved popular in the West.
In 1965 the first model, called Riga-1, was released. The frame and look was inspired by the East German Simson Suhl. The engine was an imported Czechoslovakian made Jawa Stadion S11/S22 engine. It used a two speed gearbox and foot pedals could also be used. Later production of the engine was brought in-house.
In 1967 the successor, Riga-3, was presented at the Budapest International Fair. It was not much different from its predecessor, however, some changes were done to be able to use the S-51 engine. It was a 49.8 cc, air cooled, 1.5 HP engine using carburetor, mostly of type K30 or K35. It had 19" wheels and skirted fenders.
In 1969 a more streamlined version, Riga-4, was introduced. The design of the engine had undergone numerous changes. The large-diameter, 19-inch wheels were replaced by smaller, 16-inch wheels, which remained until the end of the Riga moped production. The fuel tank was replaced. The new engine, S-52, was a 2 to 2.2 hp engine. In the last production year the all-plastic tail light cover from the previous design was replaced by metal.
In 1974 the Riga-12 was released. It had significantly changed its appearance and functioning. While the earlier models had a rounded fuel tank it was now replaced by a less flashy, rounded off, rectangular shape. It still maintained its pedal-crank functionality.
In 1979 Riga-16 was released. It essentially looked like the Riga-12. The engine was now a S-58, and pedal-cranks were not used in the design. The exhaust system had also changed; it was much longer. The seat was the long type, and more comfortable. The rear lamps were changed to a larger hexagonal-shape. It also came in metallic paint.
1981 the Riga-22 was released. At first it had a Š-62 engine, then starting from 1984 Riga-22 was equipped with a V-50 engine. First V-50 models had no external differences from the Š-62, but the internals were redesigned. It had a similar looking, but, better clutch. The only identical parts were plastic friction discs. Instead of 2 friction discs, the V-50 had 3 friction discs, and the gearbox in V-50 had ball bearings, instead of plain bearings. It had a new, and more modern electronic ignition, and the fuel tank was redesigned. The new V-50 engine was also used. Riga-22 was produced until 1989.
1986 was a turn-around year for Riga. Deteriorating quality and engine problems made the need of a new model apparent. So in 1986 the new Riga Delta was introduced. The engine in no way resembles its predecessor. The frame is completely changed. It has a new fuel tank, with only "Delta" written on it. Replaced the front and rear lamps and ignition. The Deltas were available in three colours pea-green, brick red and beige. Deltas also featured 3 gear gearbox.
In 1986 the Mini Riga was introduced. It was a mini moped using the V-50 and later V-501 engines. In the early 1990s the engine was changed to the well-known Jawa 210 Babette's two-speed, automatic transmission engine.
The Verkhovyna made in Lwow factory did not look like the Riga, but used identical mechanics.
"Sarkanā zvaigzne" was in its heyday in the 1970s very actively involved in motor sport. Especially the 125 cc category and built Riga-5S, 15S-Riga, Riga and Riga-19S-17S type that had significant success in the Soviet Union and the Baltic championships.
The Honda CX series motorcycles, including the GL500 and GL650 Silver Wing variants, were developed and released by Honda in the late 1970s, with production ending in most markets by the mid-1980s. The design included innovative features and technologies that were uncommon or unused at the time such as liquid cooling, electric-only starting, low-maintenance shaft drive, modular wheels, and dual CV-type carburetors that were tuned for reduced emissions. The electronic ignition system was separate from the rest of the electrical system, but the motorcycle could only be started via the start button.
In 1979, Honda introduced a series of light motorcycles in the US and in Europe. Honda's production lines of these models were in Spain, Belgium and Sweden.
The Yamaha XS650 is a mid-size motorcycle that was made by the Yamaha Motor Company. The standard model was introduced in October 1969, and produced until 1979. The "Special" cruiser model was introduced in 1978 and produced until 1985. The XS650 began with the 1955 Hosk SOHC 500 twin. After about 10 years of producing 500 twin, Hosk engineers designed a 650 cc twin. Later Showa Corporation acquired the Hosk company, and in 1960 Yamaha acquired Showa, with Hosk's early design of 650 cc twin.
The Babetta or Jawa Babetta was a series of mopeds built in Czechoslovakia and commonly marketed under the Jawa name in other countries. It had a 50cc two-stroke engine, a 1-speed or a 2-speed automatic transmission and reached 25–50 km/h (15–30 mph) depending on the model and year. They were produced in Považská Bystrica and later in Kolárovo, Rajec and Veľký Meder.
JAWA is a motorcycle and moped manufacturer founded in Prague, Czechoslovakia, in 1929 by František Janeček, who bought the motorcycle division of Wanderer. The name JAWA was established by concatenating the first letters of Janeček and Wanderer. In the past, especially in the 1950s, JAWA was one of the top motorcycle manufacturers and exported its 350 model to over 120 countries. The best known model was the 350 Pérák, and in the 1970s the 350 Californian. It appeared in typical black and red coloring from the US to New Zealand. After 1990 a significant loss of production occurred. A successor company was formed in 1997 in Týnec nad Sázavou, continuing the name as JAWA Moto.
Ford Model AA is a truck from Ford. As the Model T and TT became obsolete and needed to be replaced, Henry Ford began initial designs on the Model A and Model AA in 1926. Basic chassis layout was done rapidly and mechanical development was moved forward quickly. Body design and style was developed and then outsourced to various body manufacturers, including Briggs and Murray. The designs of the Model A shared parts and materials with the Model AA Ford, notably the body, engine and interior. The AA usually received plainer interiors than their car counterparts. The Model AA followed similar design changes to the Model A during the AA's four years in production, often delayed anywhere from three to nine months. The mechanical changes and upgrades were done during production of the vehicles. Body changes that occurred between 1929 and 1930 were also integrated into AA production, but leftover parts were used longer in the heavy commercial trucks.
The Honda Express or Honda NC50 is a scooter made by Honda between 1977 and 1983. Variants include the Express (NC50), Express II (NA50), Express SR (NX50) and Urban Express (NU50). All versions of the Express line are powered by an air-cooled 49 cc (3.0 cu in) two-stroke engine.
The Honda RVF750R RC45 was a fully faired racing motorcycle created for homologation purposes for the Superbike World Championship by Honda Racing Corporation. The RVF750R was the successor to the VFR750R RC30. Like its predecessor, the RVF750R featured a DOHC liquid-cooled V4 4-stroke engine with gear driven cams and a single-sided swingarm, but unlike the RC30 it utilized electronic fuel injection, in a setup very similar to the production 1992 NR750. The US spec engine had a 749.2cc capacity and was rated at 101 horsepower; the European version was rated at 118 horsepower. A simple rewire modification to the PGM-FI box increased power in the US engine up to the 118 hp. It was manufactured from 1994 until 1995 and sold in limited numbers, followed by the VTR1000R SP-1 RC51 in 2000. Unlike the VFR750R RC30 and VFR750F from which the engine was originally derived the gear drive for the cams was moved from the centre of the engine in between the cylinders to the one side allowing a slightly narrower engine.
The L-twin is a naturally aspirated two-cylinder petrol engine by Ducati. It uses a 90-degree layout and 270-degree firing order and is mounted with one cylinder nearly horizontal.
The Ducati Supersport and SS are a series of air-cooled four stroke desmodromic 2-valve 90° L-twin motorcycles made by Ducati since 1988. A limited edition Supersport called the SuperLight was sold in 1992. The name harked back to the round case 1973 Ducati 750 Super Sport, and the 1975 square case 750 and 900 Super Sport. The appellation 'SS' was applied only to the later belt drive (Pantah) based models.
The FS1 is a Yamaha moped of the 1970s. Various letter suffixes were added to indicate model variation to suit local regulations, such as the FS1-E for England, FS1P/DX NL and others.
The Honda PC50 is a moped produced by the Honda Motor Company in Japan from May 1969 until at least 1983. The PC50, though much smaller and lighter, had some similar features to Honda's popular C50 /70 /90 Super Cub line, with a step-through pressed-steel frame, a fuel tank under the saddle, a chain cover, and optionally equipped with leg shields,
The Yamaha V series are two-stroke step-through motorcycles made by the Yamaha Motor Company. There were a number of different engine capacities to suit different sections of the market. The bike was primarily released to compete with the ever-popular Honda Super Cub. It is also very similar to the Suzuki FR50.
The Honda SS50 is a 50 cc (3.1 cu in) motorcycle manufactured by the Honda Motor Company.
The Austin 15-20 is the smaller-engined of the almost identical pair of new cars announced by Herbert Austin in February 1906. A very complete catalogue with detailed specifications was issued at the same time. As well as the engine's smaller bore the 15-20 differed from the 25-30 by being only available with a live rear axle and not chain-drive. Otherwise the specifications were the same, the very minor differences are detailed below.
Janus Motorcycles is an American manufacturer of small-displacement motorcycles in Goshen, Indiana. The company was founded in 2011 by Richard Worsham and Devin Biek, and has been delivering motorcycles since 2013. Worsham and Biek got started repairing, restoring, and tuning vintage, pedal-type mopeds through Biek's company, Motion Left Mopeds, a manufacturer of aftermarket performance parts for vintage two-strokes. The moped business led to their interest in small, lightweight bikes, and helped develop business relationships with local component vendors.
The Honda SH50 is a 49 cc (3.0 cu in), air-cooled, two stroke, single cylinder, scooter style, restricted moped manufactured by the Honda Motor Company between 1984 and 2006, with substantial revisions for the 1996 model year. It was equipped with continuously variable automatic transmission, together with both electric and kick start, automatic choke and capacitor discharge electronic ignition. Brakes were drum front and rear, operated pedal-cycle style by two handlebar levers. The early models had some resemblance to Honda's C50/70/90 Super Cub range with a similar shape, dual seat and rear carrier, but with a scooter type floor, unlike the P series of mopeds such as the Honda PC50 or the Honda Express N series, which had cycle style construction. The SH50 was also known as the City Express and in some markets, as the Scoopy. All models had cycle type wheels as against the smaller wheels of later 50cc scooter style mopeds. The battery, fuel tank and two-stroke-oil reservoir were contained under the seat. Electrics were 12 volt and a handlebar mounted binnacle, which effectively formed part of the front bodywork, contained basic instrumentation and warning lights.
Their new Daimler 22 horsepower full-size luxury car was first displayed by Daimler in April 1902 at The Automobile Club’s Exhibition in London's Agricultural Hall. Daimler had elected to drop their multiple old low powered designs and restrict themselves to this 22 horsepower and a pair of 9 or 12 horsepower cars to the same design as the 22 but more lightly constructed. The King’s not quite finished new Daimler 22 was reported to be the chief attraction of the show.
The Ducati 250 Scrambler, known in Europe as the Ducati 250 SCR is an on/off-road 249 cc (15.2 cu in) single cylinder bevel drive SOHC motorcycle produced by the Italian manufacturer Ducati from 1962 to 1974. Originally produced for the American Market at the request of the US importers, Berliner Motor Corporation, the model was offered in Europe from 1968. Total production was around 12,000 machines.
The Laverda 1000 is a series of 981 cc (59.9 cu in) air cooled DOHC triple motorcycles produced by the Italian manufacturer Laverda between 1973 and 1988. The high-performance variant, the Jota, was the fastest production motorcycle from 1976 to 1981. Approximately 7,100 triples of the various models were produced.