Rossi Model 461 [1] | |
---|---|
Type | Revolver |
Place of origin | Brazil |
Production history | |
Manufacturer | Rossi Firearm Company [1] |
Variants | 1 |
Specifications | |
Mass | 26 Ounces [1] |
Length | 6.5" [1] |
Caliber | .357 Magnum and .38 Special [1] |
Barrels | 2" |
Action | Double Action/Single Action |
Feed system | 6 shots |
Sights | Fixed |
The Rossi Model 461 is a revolver manufactured by the Rossi Firearms company. [1]
The 461 is offered in calibers.357 Magnum and .38 Special +P only. The revolver is double action and it fires six rounds per load. It weighs 26 oz. (1 lb. 10 oz.). It is 6-1/2" long. It is made of steel and its finish is blued. The 461's sights are fixed gutter revolver sights. [2]
There is a known issue with the 461 model, in that the firing pin can break off if the revolver is dry fired. However, replacement parts are available, albeit not directly sold by Rossi manufacturers themselves.
Along with the 461 Rossi also produces the Model 462. This is a polished stainless steel version of the 461. Both revolvers have a 2" barrel, a rubberized finger-groove grip, and fixed sights. The 461 and 462 are both produced in Brazil by Taurus Firearms Ltd. under license from Rossi USA.
Both the models 461 and 462 are certified for use with .38 Special +P rounds, and have a limited lifetime warranty through Rossi USA.
The Colt Python is a double action/single action revolver chambered for the .357 Magnum cartridge. It was first introduced in 1955 by the Colt's Manufacturing Company.
The Smith & Wesson Model 19 is a revolver produced by Smith & Wesson that was introduced in 1957 on its K-frame. The Model 19 is chambered for .357 Magnum. The K-frame is somewhat smaller and lighter than the original N-frame .357, usually known as the Smith & Wesson Model 27. A stainless steel variant of the Model 19, the Smith & Wesson Model 66, was introduced in 1971.
First introduced in 1986, the Colt King Cobra is a medium frame double-action revolver featuring a six round cylinder which was designed and produced by the Colt's Manufacturing Company and marketed to law enforcement agencies and civilian firearms enthusiasts. Available in blued and stainless steel finishes in a variety of barrel lengths and chambered for centerfire .357 Magnum ammunition.
The Smith & Wesson Model 586, is a six- or seven-shot double-action revolver chambered for the .357 Magnum cartridge; it will also chamber and fire .38 Special cartridges. The Model 586 has a carbon steel construction and is available in a blued or nickel finish; it is essentially the same firearm as the Model 686, which has stainless steel construction. It is also known as the Distinguished Combat Magnum.
The Ruger Blackhawk is a six-shot, single-action revolver manufactured by Sturm, Ruger & Co. It is produced in a variety of finishes, calibers, and barrel lengths.
The GP100 is a family/line of double action five-, six-, seven-, or ten-shot revolvers made by Sturm, Ruger & Co., manufactured in the United States. Since its introduction, it has been produced with a number of variations including various barrel lengths and profiles, fixed or adjustable sights, and in blued carbon steel or stainless steel.
A snubnosed revolver is a small, medium, or large frame revolver with a short barrel, generally less than 3 inches in length. Smaller such revolvers are often made with "bobbed" or "shrouded" hammers and there are also "hammerless" models ; the point is to allow the gun to be drawn with little risk of it snagging on clothing. Since the external movement of the mechanism is minimal or nil, shrouded and hammerless models may be fired from within clothing. The design of these revolvers compromises range and accuracy at a distance in favor of maneuverability and ease of carry and concealment.
The Smith & Wesson Model 13 is a .357 Magnum revolver designed for military and police use. It is based on Smith & Wesson's K-frame—specifically, it is a .357 Magnum version of the heavy-barrel variant of the .38 Special Model 10.
S&W Centennial is a family of revolvers made by Smith & Wesson on the "J-Frame". Depending upon caliber, the cylinder holds either 5, 6, 7, or 8 cartridges. Centennials feature a fully enclosed (internal) hammer, which makes them Double Action Only (DAO) firearms. Like all other "J-frame" Smith & Wesson revolvers, they have a swing-out cylinder. Centennial models have been made in different versions like PD "Personal Defense", LS "Lady Smith", and M&P "Military & Police"
The Marlin Model 1894 is a lever-action repeating rifle introduced in 1894 by the Marlin Firearms Company of North Haven, Connecticut. At its introduction the rifle came with a 24-inch barrel and was chambered for a variety of rounds such as .25-20 Winchester, .32-20 Winchester, .38-40, and .44-40. Variants in other chamberings remain in production today.
The Smith & Wesson Model 60 revolver is a 5-shot revolver that is chambered in either .38 Special or .357 Magnum calibers. It was the first revolver produced from stainless steel.
The Colt Trooper is a medium frame, double-action revolver featuring a six-round cylinder, chambered for .22 Long Rifle, .22 Winchester Magnum Rimfire, .38 Special, and .357 Magnum caliber cartridges. Designed as a less expensive alternative to the upscale Colt .357 and the later Colt Python and Colt King Cobra, it was marketed to law enforcement agencies as well as civilians.
The Beretta Stampede is a single-action revolver manufactured by Beretta that is a close clone of the Colt Single Action Army "Peacemaker". The main difference is that the Beretta utilizes a transfer bar like the Ruger Vaquero which makes the gun safe to carry a full 6 rounds.
The Ruger SP101 is a series of double-action revolvers produced by the American company Sturm, Ruger & Co. The SP101 is a small frame and all-steel-construction carry revolver, with a five-shot ; six-shot ; or eight-shot cylinder.
Dan Wesson Firearms (DW), part of CZ-USA, is an American handgun manufacturer. The corporate headquarters, customer service and manufacturing plant is located in Norwich, New York. Dan Wesson Firearms is known for its revolver expertise and for some types of ammunition it has introduced over the years.
The Ruger Vaquero is a six-shot single-action revolver manufactured by Sturm, Ruger & Co. based on the New Model Ruger Blackhawk frame and was introduced in 1993. It comes in blued steel, case colored, and a gloss stainless finish, all of which are available with wood, hard rubber, simulated ivory or black micarta grips and fixed sights. It arose with the popularity of Cowboy Action Shooting from which came demand for a single-action revolver that was more traditional in appearance.
The Rossi Model 971 is a revolver manufactured by the Rossi Firearm Company of Brazil, which was owned by the Interarms Firearms of Alexandria, Virginia.
The Taurus Judge is a five-shot revolver designed and produced by Taurus International, chambered for .410 bore shot shells and the .45 Colt cartridge. Taurus promotes the Judge as a self-defense tool against carjacking and for home protection.
The Ruger Security-Six and its variants, the Service-Six and Speed-Six are a product line of double-action revolvers introduced in 1972 and manufactured until 1988 by Sturm, Ruger & Co. These revolvers were marketed to law enforcement duty issue, military, and civilian self-defense markets.
The Manurhin MR 73 is a French double-action/single-action revolver chambered in .357 Magnum and .38 Special. It is manufactured by Manurhin and is available in 2.5", 2.75", 3", 4", 4.25”, 5.25", 5.75", 6", 8" and 10" barrel lengths.