 | This article needs additional citations for verification .(September 2008) |
The SMART Retainer is a small micro sensor which is imbedded in a traditional orthodontic retainer. The sensor monitors how often the retainer is being worn, and the information is loaded onto the orthodontist's computer via a reader.
The micro sensor was created to help parents and orthodontists monitor retainer use after braces are removed. The smart retainer chip is about the size of a shirt button and provides detailed information about the chip's environmental surroundings. In the United States a smart retainer sensor is exclusively provided by orthodontists who have signed up to be providers, and should retail for around $100.
The SMART Retainer was featured on the May 15 episode of The Today Show . [1]
Here is an abstract of an article in the American Journal of Orthodontics and Dentofacial Orthopedics:
Retention is routinely prescribed after orthodontic treatment to prevent relapse. Orthodontists often notice a discrepancy between what a patient reports about retainer wear and what a clinical examination shows. In these cases, is the patient misreporting wear, or is the retainer at fault? Scientific Compliance (Atlanta, Ga) has invented, patented, and produced the Smart Retainer environmental microsensor that can be easily incorporated into many types of removable orthodontic appliances to monitor compliance. The technology behind the Smart Retainer environmental microsensor is possible because of recent reductions in electronic component sizes and power requirements. A proprietary USB-powered Smart Reader uses wireless technology to download information about actual usage from the Smart Retainer. The information is decrypted and analyzed, and can be shown to the patient in easy-to-understand charts. The orthodontist can use this information to discuss actual retainer usage vs prescribed retainer usage with the patient or parent and make data-driven recommendations about future retention. [2]
Orthodontics is a dentistry specialty that addresses the diagnosis, prevention, management, and correction of mal-positioned teeth and jaws, and misaligned bite patterns. It may also address the modification of facial growth, known as dentofacial orthopedics.
Orthodontic retainers are custom-made devices, usually made of wires or clear plastic, that hold teeth in position after surgery or any method of realigning teeth. Once a phase of orthodontic treatment has been completed to straighten teeth, there remains a lifelong risk of relapse due to a number of factors: recoil of periodontal fibres, pressure from surrounding soft tissues, the occlusion and patient’s continued growth and development. By using retainers to hold the teeth in their new position for a length of time, the surrounding periodontal fibres adapt to changes in the bone which can help minimize any changes to the final tooth position after the completion of orthodontic treatment. Retainers may also be used to treat overjets.
Dental braces are devices used in orthodontics that align and straighten teeth and help position them with regard to a person's bite, while also aiming to improve dental health. They are often used to correct underbites, as well as malocclusions, overbites, open bites, gaps, deep bites, cross bites, crooked teeth, and various other flaws of the teeth and jaw. Braces can be either cosmetic or structural. Dental braces are often used in conjunction with other orthodontic appliances to help widen the palate or jaws and to otherwise assist in shaping the teeth and jaws.
A dental technologist is a member of the dental team who, upon prescription from a dental clinician, constructs custom-made restorative and dental appliances.
Clear aligners are orthodontic devices that are a transparent, plastic form of dental braces used to adjust teeth.
Orthodontic headgear is a type of orthodontic appliance typically attached to the patient's head with a strap or number of straps around the patient’s head or neck. From this, a force is transferred to the mouth/jaw(s) of the subject.
In orthodontics, a malocclusion is a misalignment or incorrect relation between the teeth of the upper and lower dental arches when they approach each other as the jaws close. The English-language term dates from 1864; Edward Angle (1855-1930), the "father of modern orthodontics", popularised it. The word "malocclusion" derives from occlusion, and refers to the manner in which opposing teeth meet.
A palatal expander is a device in the field of orthodontics which is used to widen the upper jaw (maxilla) so that the bottom and upper teeth will fit together better. This is a common orthodontic procedure. Although the use of an expander is most common in children and adolescents 8-18 years of age, it can also be used in adults, although expansion is slightly more uncomfortable and takes longer. A patient who would rather not wait several months for the end result by a palatal expander may be able to opt for a surgical separation of the maxilla. Use of a palatal expander is most often followed by braces to then straighten the teeth.
Orthodontic technology is a specialty of dental technology that is concerned with the design and fabrication of dental appliances for the treatment of malocclusions, which may be a result of tooth irregularity, disproportionate jaw relationships, or both.
Overjet is the extent of horizontal (anterior-posterior) overlap of the maxillary central incisors over the mandibular central incisors. In class II malocclusion the overjet is increased as the maxillary central incisors are protruded.
Percival Raymond Begg AO was a professor at the University of Adelaide School of Dentistry and a well known orthodontist, famous for developing the "Begg technique". Permanent displays dedicated to the Begg technique can be found in the Smithsonian Institution in Washington DC, the Library of the American Dental Association in Chicago, and the PR Begg Museum at the University of Adelaide.
Interproximal reduction (IPR) is the practice of mechanically removing enamel from between the teeth to achieve orthodontic ends, such as to correct crowding, or reshape the contact area between neighboring teeth. After reducing the enamel, the procedure should also involve anatomic re-contouring and the protection of interproximal enamel surfaces.
Pre-eruption guidance is an orthodontic treatment method that allows for expansion of existing erupting teeth long before they appear in the mouth. The use off pre-eruption guidance appliances and the timing of extractions of certain deciduous teeth aligns the teeth naturally as opposed to orthodontic mechanical movement of permanent teeth into alignment after they have erupted. Research shows that pre-eruption guidance produces far more stable tooth alignment than alternative treatments.
Lingual braces are one of the many types of the fixed orthodontic treatment appliances available to patients needing orthodontics. They involve attaching the orthodontic brackets on the inner sides of the teeth. The main advantage of lingual braces is their near invisibility compared to the standard braces, which are attached on the buccal (cheek) sides of the tooth. Lingual braces were invented by Craven Kurz in 1976.
Dr. William J. Clark is a Scottish orthodontist known for developing Twin Block Appliance in Orthodontics. This appliance was developed by Dr. Clark in 1977 in Scotland and since then this appliance has been used in correction of Class 2 malocclusions with retrognathic mandible. He also developed invisible TransForce Appliance in 2004.
Anchorage in orthodontics is defined as a way of resisting movement of a tooth or number of teeth by using different techniques. Anchorage is an important consideration in the field of orthodontics as this is a concept that is used frequently when correcting malocclusions. Unplanned or unwanted tooth movement can have dire consequences in a treatment plan, and therefore using anchorage stop a certain tooth movement becomes important. Anchorage can be used from many different sources such as teeth, bone, implants or extra-orally.
Elastics are rubber bands frequently used in the field of orthodontics to correct different types of malocclusions. The elastic wear is prescribed by an orthodontist or a dentist in an orthodontic treatment. The longevity of the elastic wear may vary from two weeks to several months. The elastic wear can be worn from 12 to 23 hours a day, either during the night or throughout the day depending on the requirements for each malocclusion. The many different types of elastics may produce different forces on teeth. Therefore, using elastics with specific forces is critical in achieving a good orthodontic occlusion.
Activator Appliance is an Orthodontics appliance that was developed by Viggo Andresen in 1908. This was one of the first functional appliances that was developed to correct functional jaw in the early 1900s. Activator appliance became the universal appliance that was used widely throughout Europe in the earlier part of the 20th century.
Open bite is a type of orthodontic malocclusion which has been estimated to occur in 0.6% of the people in the United States. This type of malocclusion has no vertical overlap or contact between the anterior incisors. The term "open bite" was coined by Carevelli in 1842.
