External links
- "SOAP-over-UDP Version 1.1" . Retrieved 2012-01-06.
 | This computer networking article is a stub. You can help Wikipedia by expanding it. |
SOAP-over-UDP is an OASIS standard covering the publication of SOAP messages over UDP transport protocol, providing for One-Way and Request-Response message patterns.
SOAP is a messaging protocol specification for exchanging structured information in the implementation of web services in computer networks. Its purpose is to provide extensibility, neutrality and independence. It uses XML Information Set for its message format, and relies on application layer protocols, most often Hypertext Transfer Protocol (HTTP) or Simple Mail Transfer Protocol (SMTP), for message negotiation and transmission.
In computer networking, the User Datagram Protocol (UDP) is one of the core members of the Internet protocol suite. The protocol was designed by David P. Reed in 1980 and formally defined in RFC 768. With UDP, computer applications can send messages, in this case referred to as datagrams, to other hosts on an Internet Protocol (IP) network. Prior communications are not required in order to set up communication channels or data paths.
| | This computer networking article is a stub. You can help Wikipedia by expanding it. |
In computing, traceroute is a computer network diagnostic tool for displaying the route (path) and measuring transit delays of packets across an Internet Protocol (IP) network. The history of the route is recorded as the round-trip times of the packets received from each successive host in the route (path); the sum of the mean times in each hop is a measure of the total time spent to establish the connection. Traceroute proceeds unless all (three) sent packets are lost more than twice; then the connection is lost and the route cannot be evaluated. Ping, on the other hand, only computes the final round-trip times from the destination point.
In computer networking, the transport layer is a conceptual division of methods in the layered architecture of protocols in the network stack in the Internet Protocol Suite and the Open Systems Interconnection (OSI) reference model. The protocols of this layer provide host-to-host communication services for applications. It provides services such as connection-oriented communication, reliability, flow control, and multiplexing.
The Bootstrap Protocol (BOOTP) is a computer networking protocol used in Internet Protocol networks to automatically assign an IP address to network devices from a configuration server. The BOOTP was originally defined in RFC 951.
On Usenet, the Usenet Death Penalty is a final penalty that may be issued against Internet service providers or single users who produce too much spam or fail to adhere to Usenet standards. Messages that fall under the jurisdiction of a Usenet Death Penalty will be cancelled. Cancelled messages are deleted from Usenet servers and not allowed to propagate. This causes users on the affected ISP to be unable to post to Usenet, and it puts pressure on the ISP to change their policies. Notable cases include actions taken against UUNET, CompuServe, and Excite@Home.
Microsoft Message Queuing or MSMQ is a message queue implementation developed by Microsoft and deployed in its Windows Server operating systems since Windows NT 4 and Windows 95. Windows Server 2016 and Windows 10 also includes this component. In addition to its mainstream server platform support, MSMQ has been incorporated into Microsoft Embedded platforms since 1999 and the release of Windows CE 3.0.
In computer networking, the Datagram Congestion Control Protocol (DCCP) is a message-oriented transport layer protocol. DCCP implements reliable connection setup, teardown, Explicit Congestion Notification (ECN), congestion control, and feature negotiation. The IETF published DCCP as RFC 4340, a proposed standard, in March 2006. RFC 4336 provides an introduction.
GPRS Tunneling Protocol (GTP) is a group of IP-based communications protocols used to carry general packet radio service (GPRS) within GSM, UMTS and LTE networks. In 3GPP architectures, GTP and Proxy Mobile IPv6 based interfaces are specified on various interface points.
In computer networking, a wire protocol refers to a way of getting data from point to point: A wire protocol is needed if more than one application has to interoperate. It generally refers to protocols higher than the physical layer. In contrast to transport protocols at the transport level, the term "wire protocol" is used to describe a common way to represent information at the application level. It refers only to a common application layer protocol and not to a common object semantic of the applications. Such a representation at application level needs a common infoset and a data binding.
In software architecture, a messaging pattern is a network-oriented architectural pattern which describes how two different parts of a message passing system connect and communicate with each other.
Web Services Dynamic Discovery (WS-Discovery) is a technical specification that defines a multicast discovery protocol to locate services on a local network. It operates over TCP and UDP port 3702 and uses IP multicast address 239.255.255.250. As the name suggests, the actual communication between nodes is done using web services standards, notably SOAP-over-UDP.
The Simple Sensor Interface (SSI) protocol is a simple communications protocol designed for data transfer between computers or user terminals and smart sensors. The SSI protocol is an Application layer protocol as in the OSI model.
EtherNet/IP is an industrial network protocol that adapts the Common Industrial Protocol to standard Ethernet. EtherNet/IP is one of the leading industrial protocols in the United States and is widely used in a range of industries including factory, hybrid and process. The EtherNet/IP and CIP technologies are managed by ODVA, Inc., a global trade and standards development organization founded in 1995 with over 300 corporate members.
xPL is an open protocol intended to permit the control and monitoring of home automation devices. The primary design goal of xPL is to provide a rich set of features and functionality, whilst maintaining an elegant, uncomplicated message structure. The protocol includes complete discovery and auto-configuration capabilities which support a fully "plug-n-play" architecture - essential to ensure a good end-user experience.
The Message Send Protocol (MSP) is an application layer protocol used to send a short message between nodes on a network. The original version of the protocol was published in 1990. It was updated as Message Send Protocol 2 in 1992.
The Web Services Description Language is an XML-based interface description language that is used for describing the functionality offered by a web service. The acronym is also used for any specific WSDL description of a web service, which provides a machine-readable description of how the service can be called, what parameters it expects, and what data structures it returns. Therefore, its purpose is roughly similar to that of a type signature in a programming language.
The Stream Control Transmission Protocol (SCTP) is a computer networking communications protocol which operates at the transport layer and serves a role similar to the popular protocols TCP and UDP. It is standardized by IETF in RFC 4960.