Sampietrini

Last updated
Sampietrini.jpg
Examples of sampietrini pavement Sampietrini2.jpg
Examples of sampietrini pavement

Sampietrini (also sanpietrini) is the pavement found in the historic district of Rome and in St. Peter's Square, Vatican City. [1] [2] [3] The earliest examples were made by trimming large blocks that had been used in ancient Roman roads, as recently discovered in fifteenth- and sixteenth-century archeological excavations. The first documented use in Rome of "sampietrini" stones was during the reign of Pope Pius V (1566–72). Over the next two centuries, the stones were used to pave all the main streets of Rome, because this mode was superior to brick, as it provided a smoother, stronger surface for carriages.

Advantages of sampietrini:

Disadvantages of sampietrini:

Sampeitrini's peculiarities make it unsuitable to streets where traffic travels at high speed. Nowadays, its use is largely confined to historical or very narrow streets in the center of Rome (e.g., in Trastevere), where traffic is light and slow.

The widespread availability of sampietrini made it a weapon of choice in Italian riots since the 1960s.[ citation needed ]

In July 2005, the mayor of Rome, Walter Veltroni, declared that the Sampietrini pavement was causing problems: its irregularity could be dangerous to moped riders and other two-wheeled vehicles; heavy vehicles passing over it created noise and vibrations damaging to adjacent buildings. While these concerns were countered with the argument that inadequate maintenance was at fault, Veltroni said that the Sampietrini would be removed, reserving them solely for pedestrian streets.

Notes

  1. Cui Italy, Rome's Sampietrini Cobblestones
  2. Life in Italy, Sampietrini In Rome: As Iconic As The Cupolone
  3. Wanted in Rome, Sampietrini: the story of Rome's iconic cobblestones

Sources

Cibin, Ludovica, "Selciato Romano; il sampietrino" (Rome: Gangemi) 2005.

Rinne, Katherine, "The Waters of Rome: Aqueducts, Fountains, and the Birth of the Baroque City," chapter 9 (New Haven: Yale) 2010.

Related Research Articles

<span class="mw-page-title-main">Road</span> Land route for travel by vehicles

A road is a thoroughfare for the conveyance of traffic that mostly has an improved surface for use by vehicles and pedestrians. Unlike streets, whose primary function is to serve as public spaces, the main function of roads is transportation.

<span class="mw-page-title-main">Roman roads</span> Roads built in service of the Roman Empire

Roman roads were physical infrastructure vital to the maintenance and development of the Roman state, and were built from about 300 BC through the expansion and consolidation of the Roman Republic and the Roman Empire. They provided efficient means for the overland movement of armies, officials, civilians, inland carriage of official communications, and trade goods. Roman roads were of several kinds, ranging from small local roads to broad, long-distance highways built to connect cities, major towns and military bases. These major roads were often stone-paved and metaled, cambered for drainage, and were flanked by footpaths, bridleways and drainage ditches. They were laid along accurately surveyed courses, and some were cut through hills, or conducted over rivers and ravines on bridgework. Sections could be supported over marshy ground on rafted or piled foundations.

<span class="mw-page-title-main">Road transport</span> Collective term for all forms of transport which takes place on roads

Road transport or road transportation is a type of transport using roads. Transport on roads can be roughly grouped into the transportation of goods and transportation of people. In many countries licensing requirements and safety regulations ensure a separation of the two industries. Movement along roads may be by bike, automobile, bus, truck, or by animal such as horse or oxen. Standard networks of roads were adopted by Romans, Persians, Aztec, and other early empires, and may be regarded as a feature of empires. Cargo may be transported by trucking companies, while passengers may be transported via mass transit. Commonly defined features of modern roads include defined lanes and signage. Various classes of road exist, from two-lane local roads with at-grade intersections to controlled-access highways with all cross traffic grade-separated.

<span class="mw-page-title-main">Sidewalk</span> Pedestrian path along the side of a road

A sidewalk, pavement, footpath in Australia, India, New Zealand and Ireland, or footway, is a path along the side of a road. Usually constructed of concrete, pavers, brick, stone, or asphalt, it is designed for pedestrians. A sidewalk is normally higher than the roadway, and separated from it by a kerb. There may also be a planted strip between the sidewalk and the roadway and between the roadway and the adjacent land.

<span class="mw-page-title-main">Street</span> Public thoroughfare in a built environment

A street is a public thoroughfare in a built environment. It is a public parcel of land adjoining buildings in an urban context, on which people may freely assemble, interact, and move about. A street can be as simple as a level patch of dirt, but is more often paved with a hard, durable surface such as tarmac, concrete, cobblestone or brick. Portions may also be smoothed with asphalt, embedded with rails, or otherwise prepared to accommodate non-pedestrian traffic.

<span class="mw-page-title-main">Highway engineering</span> Civil engineering of roads, bridges, and tunnels

Highway engineering is a professional engineering discipline branching from the civil engineering subdiscipline of transportation engineering that involves the planning, design, construction, operation, and maintenance of roads, highways, streets, bridges, and tunnels to ensure safe and effective transportation of people and goods. Highway engineering became prominent towards the latter half of the 20th century after World War II. Standards of highway engineering are continuously being improved. Highway engineers must take into account future traffic flows, design of highway intersections/interchanges, geometric alignment and design, highway pavement materials and design, structural design of pavement thickness, and pavement maintenance.

<span class="mw-page-title-main">Road surface</span> Road covered with durable surface material

A road surface (English), or pavement (American), is the durable surface material laid down on an area intended to sustain vehicular or foot traffic, such as a road or walkway. In the past, gravel road surfaces, macadam, hoggin, cobblestone and granite setts were extensively used, but these have mostly been replaced by asphalt or concrete laid on a compacted base course. Asphalt mixtures have been used in pavement construction since the beginning of the 20th century and are of two types: metalled (hard-surfaced) and unmetalled roads. Metalled roadways are made to sustain vehicular load and so are usually made on frequently used roads. Unmetalled roads, also known as gravel roads, are rough and can sustain less weight. Road surfaces are frequently marked to guide traffic.

<span class="mw-page-title-main">Via Egnatia</span> Roman road across the southern Balkans

The Via Egnatia was a road constructed by the Romans in the 2nd century BC. It crossed Illyricum, Macedonia, and Thracia, running through territory that is now part of modern Albania, North Macedonia, Greece, and European Turkey as a continuation of the Via Appia.

<span class="mw-page-title-main">Permeable paving</span> Roads built with water-pervious materials

Permeable paving surfaces are made of either a porous material that enables stormwater to flow through it or nonporous blocks spaced so that water can flow between the gaps. Permeable paving can also include a variety of surfacing techniques for roads, parking lots, and pedestrian walkways. Permeable pavement surfaces may be composed of; pervious concrete, porous asphalt, paving stones, or interlocking pavers. Unlike traditional impervious paving materials such as concrete and asphalt, permeable paving systems allow stormwater to percolate and infiltrate through the pavement and into the aggregate layers and/or soil below. In addition to reducing surface runoff, permeable paving systems can trap suspended solids, thereby filtering pollutants from stormwater.

<span class="mw-page-title-main">Cobblestone</span> Natural stones for surfacing roads and buildings

Cobblestone is a natural building material based on cobble-sized stones, and is used for pavement roads, streets, and buildings.

Pavement, in construction, is an outdoor floor or superficial surface covering. Paving materials include asphalt, concrete, stones such as flagstone, cobblestone, and setts, artificial stone, bricks, tiles, and sometimes wood. In landscape architecture, pavements are part of the hardscape and are used on sidewalks, road surfaces, patios, courtyards, etc.

<span class="mw-page-title-main">Driveway</span> Type of private road for local access to one or a small group of structures

A driveway is a type of private road for local access to one or a small group of structures, and is owned and maintained by an individual or group.

<span class="mw-page-title-main">Barricade</span> Structure that creates a barrier or obstacle

Barricade is any object or structure that creates a barrier or obstacle to control, block passage or force the flow of traffic in the desired direction. Adopted as a military term, a barricade denotes any improvised field fortification, such as on city streets during urban warfare.

<span class="mw-page-title-main">Curb</span> Edge where a sidewalk meets a road

A curb, or kerb, is the edge where a raised sidewalk or road median/central reservation meets a street or other roadway.

<span class="mw-page-title-main">Via dei Fori Imperiali</span> Thoroughfare in Rome, Italy

The Via dei Fori Imperiali is a road in the centre of the city of Rome, Italy, that runs in a straight line from the Piazza Venezia to the Colosseum. Its course takes it over parts of the Forum of Trajan, Forum of Augustus and Forum of Nerva, parts of which can be seen on both sides of the road. Since the 1990s, there has been a great deal of archeological excavation on both sides of the road, as significant Imperial Roman relics remain to be found underneath it.

The history of road transport started with the development of tracks by humans and their beasts of burden.

<span class="mw-page-title-main">Bridge near Limyra</span>

The Bridge near Limyra is a late Roman bridge in Lycia, in modern south-west Turkey, and one of the oldest segmented arch bridges in the world. Located near the ancient city of Limyra, it is the largest civil engineering structure of antiquity in the region, spanning the Alakır Çayı river over a length of 360 m (1,181.1 ft) on 26 segmental arches. These arches, with a span-to-rise ratio of 5.3:1, give the bridge an unusually flat profile, and were unsurpassed as an architectural achievement until the late Middle Ages. Today, the structure is largely buried by river sediments and surrounded by greenhouses. Despite its unique features, the bridge remains relatively unknown, and only in the 1970s did researchers from the Istanbul branch of the German Archaeological Institute carry out field examinations on the site.

<span class="mw-page-title-main">Sett (paving)</span> Rectangular stone for surfacing roads and walkways

A sett, also known as a block or Belgian block, is a broadly rectangular quarried stone used in paving roads and walkways. Formerly in widespread use, particularly on steeper streets because setts provided horses' hooves with better grip than a smooth surface, they are now encountered rather as decorative stone paving in landscape architecture. Setts are often referred to as "cobblestones", although a sett is distinct from a cobblestone in that it is quarried or worked to a regular shape, whereas the latter is generally a small, naturally-rounded rock. Setts are usually made of granite.

Diamond grinding is a pavement preservation technique that corrects a variety of surface imperfections on both concrete and asphalt concrete pavements. Most often utilized on concrete pavement, diamond grinding is typically performed in conjunction with other concrete pavement preservation (CPP) techniques such as road slab stabilization, full- and partial-depth repair, dowel bar retrofit, cross stitching longitudinal cracks or joints and joint and crack resealing. Diamond grinding restores rideability by removing surface irregularities caused during construction or through repeated traffic loading over time. The immediate effect of diamond grinding is a significant improvement in the smoothness of a pavement. Another important effect of diamond grinding is the considerable increase in surface macrotexture and consequent improvement in skid resistance, noise reduction and safety.

<span class="mw-page-title-main">Cobblestone mosaics (Freiburg im Breisgau)</span>

Cobblestone mosaics can be found throughout Freiburg im Breisgau. Most mosaics are embedded in the cobblestone pavement of the city centre of Freiburg.