Seitengewehr 42

Last updated
SEITENGEWEHR 42 Technical drawing.jpg

The Seitengewehr 42, otherwise known as the Seitengewehr Modell 42 or in English the Bayonet Model 1942, was developed in 1942 by Wilhelm Gustloff Werke and manufactured by Carl Eickhorn in Solingen. According to its description, the Gustloff Company and its chief designer, Carl Barnitzke, got a German patent 766198 in October 1942 for an Armeemesser (Army knife) according to its description. The SG 42 was intended to supplement and later replace the original S84/98 III bayonet of the Karabiner 98k service rifle. The Seitengewehr 42 was designed as a multi-tool combat knife, but could also be mounted as a bayonet on the Karabiner 98k. The S84/98 III bayonet itself was a proven design, but there was a shortage of utility knives in the German military, which were usually procured privately.

Contents

After the consistently positive reception of several hundred pieces in the 1943 troops trials, the production was approved by Adolf Hitler, but this should take place because of the cost of a conversion of production until after the war. In 1944, an order for 10,000 pieces was issued by the Heereswaffenamt (Army Weapons Office). Factory production was started, but due to the end of the war, Factories delivered only a small number. SG 42s were manufactured by Waffenfabrik Carl Eickhorn in Solingen and toolkits by Robert Klaas of Solingen. [1]

Technical specifications

Production largely made the SG 42 from stamped sheet metal parts. The handle scales and sheath are inexpensive and quickly produced, molded phenolic resin parts. The blade length was 179.5 mm (7.07 in), the total length was 304 mm (12.0 in) (317 mm (12.5 in) with sheath). The blade had a fuller. The knife contained a detachable toolkit in the handle that individuals could use for rifle maintenance and other tasks. The toolkit included a screwdriver, small knife, awl, and a corkscrew. The protective bracket of the handle served as a cartridge case extractor.

Analogous to the development of this knife bayonet after WW II, a worldwide development of the bayonet as a mere cutting and stabbing weapon to the plantable utility knife (saw, wire cutter) started. The Sudanese bayonet for the post-war ArmaLite AR-10 battle rifle was an adaptation of the SG 42 with only slight alterations. [2]

Related Research Articles

<span class="mw-page-title-main">Bayonet</span> Pointed weapon attached to the end of a firearm

A bayonet is a knife, dagger, sword, or spike-shaped weapon designed to fit on the end of the muzzle of a rifle, carbine, musket or similar firearm, allowing it to be used as a spear-like weapon. From the early 17th to the early 20th century, it was a melee weapon used by infantry for offensive and/or defensive tactics. Today, it is considered an ancillary weapon or weapon of last resort, although it is still used for ceremonial purposes.

<span class="mw-page-title-main">StG 44</span> German World War II assault rifle

The StG 44 is a German assault rifle developed during World War II by Hugo Schmeisser. It is also known by its early designations as the MP 43 and MP 44. The StG 44 was an improvement of an earlier design, the Maschinenkarabiner 42(H).

<span class="mw-page-title-main">Karabiner 98k</span> German bolt-action rifle

The Karabiner 98 kurz, often abbreviated Karabiner 98k, Kar98k or K98k and also sometimes incorrectly referred to as a K98, is a bolt-action rifle chambered for the 7.92×57mm Mauser cartridge. It was adopted on 21 June 1935 as the standard service rifle by the German Wehrmacht. It was one of the final developments in the long line of Mauser military rifles.

<span class="mw-page-title-main">Victorinox</span> Swiss knife manufacturer and watchmaker

Victorinox is a knife manufacturer and watchmaker based in the town of Ibach, in the Canton of Schwyz, Switzerland. It is well known for its Swiss Army knives. The Swiss Army knives made by Victorinox are made of a proprietary blend hardened steel from Germany and France. Since its acquisition of rival Wenger in 2005, it has become the sole supplier of multi-purpose knives to the Swiss army. It is the biggest manufacturer of pocket knives in the world; in addition, the company licenses its logo for watches, apparel, and travel gear.

<span class="mw-page-title-main">ArmaLite AR-10</span> Battle rifle

The ArmaLite AR-10 is a 7.62×51mm NATO battle rifle designed by Eugene Stoner in the late 1950s and manufactured by ArmaLite. When first introduced in 1956, the AR-10 used an innovative combination of a straight-line barrel/stock design with phenolic composite, a new patent-filed gas-operated bolt and carrier system and forged alloy parts resulting in a small arm significantly easier to control in automatic fire and over 1 lb (0.45 kg) lighter than other infantry rifles of the day. Over its production life, the original AR-10 was built in relatively small numbers, with fewer than 10,000 rifles assembled. However, the ArmaLite AR-10 would become the progenitor for a wide range of firearms.

<span class="mw-page-title-main">Trench knife</span> Type of combat knife

A trench knife is a combat knife designed to kill or incapacitate an enemy at close quarters, such as in a trench or other confined area. It was developed as a close combat weapon for soldiers attacking enemy trenches during the First World War. An example of a World War I trench knife is the German Army's Nahkampfmesser.

<span class="mw-page-title-main">Gewehr 98</span> German service rifle from 1898 to 1935

The Gewehr 98 is a bolt-action rifle made by Mauser for the German Empire as its service rifle from 1898 to 1935.

<span class="mw-page-title-main">M9 bayonet</span> Bayonet

The M9 Bayonet, officially known as the M9 Phrobis III, is a multi-purpose knife and bayonet officially adopted in 1986 by the United States. It has a 7-inch (18 cm) blade and is issued with a sheath designed to double as a wire cutter.

<span class="mw-page-title-main">Karabinek wz. 1929</span> Service rifle

The Karabinek wz.29 was a Polish bolt-action short rifle based on the German Kar98AZ. Identifying attributes include a 98/05 style mast bayonet lug ending directly beneath the front sight and winged protective ears to either side of the front sight blade. Cavalry models featured a turned-down bolt handle, and early versions had a stacking hook near the end of the stock on the right side.

A combat knife is a fighting knife designed for military use and primarily intended for hand-to-hand or close combat fighting.

<span class="mw-page-title-main">M6 bayonet</span> Bayonet

The M6 Bayonet is a bayonet used by the U.S. military for the M14 rifle, it can also be used with the Mk 14 Enhanced Battle Rifle as well M39 Enhanced Marksman Rifle. It was introduced in 1957, at the same time as the rifle itself. It is the only bayonet made for the M14.

<span class="mw-page-title-main">M7 bayonet</span> Bayonet

The M7 bayonet is a bayonet that was used by the U.S. military for the M16 rifle, it can also be used with the M4 carbine as well as many other assault rifles, carbines, and combat shotguns. It can be used as a fighting knife and utility tool. It was introduced in 1964, when the M16 rifle entered service during the Vietnam War.

<span class="mw-page-title-main">M1905 bayonet</span> Sword bayonet

The Model of 1905 bayonet was made for the U.S. M1903 Springfield rifle. This designation was changed to Model 1905 in 1917, and then to M1905 in 1925, when the army adopted the M designation nomenclature. The M1905 bayonet has a 16 in (41 cm) steel blade and a 4 in (10 cm) handle with wooden or plastic grips. The bayonet also fits the U.S. M1 Garand rifle. From 1943 to 1945, a shorter, 10 in (25 cm), bladed version was produced with either black or dark red molded plastic grips, and designated the M1 bayonet. A number of M1905 bayonets were recalled from service, their blades cut down, and reissued as M1 bayonets.

<span class="mw-page-title-main">Knife bayonet</span>

A knife bayonet is a knife which can be used both as a bayonet, combat knife, or utility knife as a cutting and thrusting tool or weapon. The knife bayonet became the almost universal form of bayonet in the 20th century due to its versatility and effectiveness. Spike bayonets proved useless when separated from the rifle and ineffective in trench warfare; and while versatile, sword bayonets proved to be impractical weapons in trench warfare because of their overall length. The first knife bayonet to see widespread service was the 10 inch blade Seitengewehr 1871/84, which became the standard German infantry bayonet in 1884. Its derivative, the Seitengewehr 1884/98, would go on in use until 1945 in German service.

vz. 33 Czech rifle

The puška vz. 33 was a Czechoslovak bolt-action carbine that was based on a Mauser-type action, designed and produced in Československá zbrojovka in Brno during the 1930s in order to replace the obsolete Mannlicher vz. 1895 carbines of the Czechoslovak četnictvo (gendarmerie). The manufacturer's designation was vz. 16/33. Another version, the Vz. 12/33, was also produced for the Latin American market.

<span class="mw-page-title-main">KM2000</span>

The KM2000 is the standard combat knife of the German Bundeswehr, mostly used by the German Army. The knife is manufactured in Germany by the Eickhorn-Solingen company.

The evolution of German military rifles is a history of common and diverse paths followed by the separate German states, until the mid-19th century when Prussia emerged as the dominant state within Germany and the nation was unified. This article discusses rifled shoulder arms developed in or for the military of the states that later became Germany; it excludes firearms of the Austrian Empire, except where they were used substantially by German troops.

<span class="mw-page-title-main">Ka-Bar</span> Combat knife first adopted by the United States military in 1942

Ka-Bar is the contemporary popular name for the combat knife first adopted by the United States Marine Corps in November 1942 as the 1219C2 combat knife, and subsequently adopted by the United States Navy as the U.S. Navy utility knife, Mark 2. Ka-Bar is the name of a related knife manufacturing company, Ka-Bar Knives., Inc., of Olean, New York, a subsidiary of the Cutco Corporation.

<span class="mw-page-title-main">S84/98 III bayonet</span> Knife bayonet

The S84/98 III was the standard bayonet for the Karabiner 98k rifle.

References