Simple Gateway Control Protocol

Last updated

The Simple Gateway Control Protocol (SGCP) is a communications protocol used within a voice over Internet Protocol (VoIP) system. It has been superseded by the Media Gateway Control Protocol (MGCP), another implementation of the media gateway control protocol architecture.

The Simple Gateway Control Protocol was published in several Internet Engineering Task Force (IETF) draft versions between May and July 1998 by Mauricio Arango and Christian Huitema, [1] at Telcordia Technologies (formerly Bellcore). The protocol architecture decomposes a telecommunications gateway located at the boundary between the public switched telephone network and an Internet Protocol (IP) network, such as the Internet, into a media gateway controller (MGC) on the IP network, providing call and device control, and multiple media gateways (MGs) that handle the actual media conversion to the analog or digital circuits of the PSTN, or simply connect residential telephones. Other implementations of the architecture refer to the controller as a softswitch. Communication between multiple media gateway controllers is handled by other protocols, such as the Session Initiation Protocol (SIP).

Shortly after its publication, SGCP was merged with the Internet Protocol Device Control (IPDC) proposal sponsored by Level3 Communications in the Fall of 1998. This led to the definition of the Media Gateway Control Protocol, jointly submitted to the IETF by the authors of SGCP and IPDC in October 1998. MGCP was used as a conceptual basis with additions from the Media Gateway Device Protocol by Lucent resulting in the Megaco/H.248 protocol, which gained formal standards-level status at the IETF and the International Telecommunication Union (ITU).

Related Research Articles

The Dynamic Host Configuration Protocol (DHCP) is a network management protocol used on Internet Protocol (IP) networks for automatically assigning IP addresses and other communication parameters to devices connected to the network using a client–server architecture.

<span class="mw-page-title-main">IPv6</span> Version 6 of the Internet Protocol

Internet Protocol version 6 (IPv6) is the most recent version of the Internet Protocol (IP), the communications protocol that provides an identification and location system for computers on networks and routes traffic across the Internet. IPv6 was developed by the Internet Engineering Task Force (IETF) to deal with the long-anticipated problem of IPv4 address exhaustion, and was intended to replace IPv4. In December 1998, IPv6 became a Draft Standard for the IETF, which subsequently ratified it as an Internet Standard on 14 July 2017.

The Session Initiation Protocol (SIP) is a signaling protocol used for initiating, maintaining, and terminating communication sessions that include voice, video and messaging applications. SIP is used in Internet telephony, in private IP telephone systems, as well as mobile phone calling over LTE (VoLTE).

<span class="mw-page-title-main">Network address translation</span> Protocol facilitating connection of one IP address space to another

Network address translation (NAT) is a method of mapping an IP address space into another by modifying network address information in the IP header of packets while they are in transit across a traffic routing device. The technique was originally used to bypass the need to assign a new address to every host when a network was moved, or when the upstream Internet service provider was replaced, but could not route the network's address space. It has become a popular and essential tool in conserving global address space in the face of IPv4 address exhaustion. One Internet-routable IP address of a NAT gateway can be used for an entire private network.

Voice over Internet Protocol (VoIP), also called IP telephony, is a method and group of technologies for voice calls for the delivery of voice communication sessions over Internet Protocol (IP) networks, such as the Internet.

The Skinny Client Control Protocol (SCCP) is a proprietary network terminal control protocol originally developed by Selsius Systems, which was acquired by Cisco Systems in 1998.

<span class="mw-page-title-main">Universal Plug and Play</span> Set of networking protocols

Universal Plug and Play (UPnP) is a set of networking protocols on the Internet Protocol (IP) that permits networked devices, such as personal computers, printers, Internet gateways, Wi-Fi access points and mobile devices, to seamlessly discover each other's presence on the network and establish functional network services. UPnP is intended primarily for residential networks without enterprise-class devices.

<span class="mw-page-title-main">Media gateway</span>

A media gateway is a translation device or service that converts media streams between disparate telecommunications technologies such as POTS, SS7, Next Generation Networks or private branch exchange (PBX) systems. Media gateways enable multimedia communications across packet networks using transport protocols such as Asynchronous Transfer Mode (ATM) and Internet Protocol (IP).

The IP Multimedia Subsystem or IP Multimedia Core Network Subsystem (IMS) is a standardised architectural framework for delivering IP multimedia services. Historically, mobile phones have provided voice call services over a circuit-switched-style network, rather than strictly over an IP packet-switched network. Various voice over IP technologies are available on smartphones; IMS provides a standard protocol across vendors.

<span class="mw-page-title-main">H.248</span>

The Gateway Control Protocol is an implementation of the media gateway control protocol architecture for providing telecommunication services across a converged internetwork consisting of the traditional public switched telephone network (PSTN) and modern packet networks, such as the Internet. H.248 is the designation of the recommendations developed by the ITU Telecommunication Standardization Sector (ITU-T) and Megaco is a contraction of media gateway control protocol used by the earliest specifications by the Internet Engineering Task Force (IETF). The standard published in March 2013 by ITU-T is entitled H.248.1: Gateway control protocol: Version 3.

PacketCable network is a technology specification defined by the industry consortium CableLabs for using Internet Protocol (IP) networks to deliver multimedia services, such as IP telephony, conferencing, and interactive gaming on a cable television infrastructure.

The next-generation network (NGN) is a body of key architectural changes in telecommunication core and access networks. The general idea behind the NGN is that one network transports all information and services by encapsulating these into IP packets, similar to those used on the Internet. NGNs are commonly built around the Internet Protocol, and therefore the term all IP is also sometimes used to describe the transformation of formerly telephone-centric networks toward NGN.

Network-based Call Signaling (NCS) is a profile of the Media Gateway Control Protocol (MGCP) for use in PacketCable applications for voice-over-IP.

Network address translation traversal is a computer networking technique of establishing and maintaining Internet Protocol connections across gateways that implement network address translation (NAT).

A back-to-back user agent (B2BUA) is a logical network element in Session Initiation Protocol (SIP) applications. SIP is a signaling protocol for managing multimedia Voice over Internet Protocol (VoIP) telephone calls. A back-to-back user agent operates between both end points of a communications session and divides the communication channel into two call legs, and mediates all SIP signaling between the endpoints of the session, from establishment to termination. As all control messages for each call flow through the B2BUA, a service provider may implement value-added features available during the call.

<span class="mw-page-title-main">H.323</span> Audio-visual communication signaling protocol

H.323 is a recommendation from the ITU Telecommunication Standardization Sector (ITU-T) that defines the protocols to provide audio-visual communication sessions on any packet network. The H.323 standard addresses call signaling and control, multimedia transport and control, and bandwidth control for point-to-point and multi-point conferences.

Internet Protocol Device Control (IPDC) is a 1998 specification of a communications protocol for voice over Internet Protocol (VoIP) telephony, developed by Level 3 Communications.

UNIStim is a deprecated Telecommunications protocol developed by Nortel for IP Phone and IP PBX communications.

The Media Gateway Control Protocol (MGCP) is a telecommunication protocol for signaling and call control in hybrid voice over IP (VoIP) and traditional telecommunication systems. It implements the media gateway control protocol architecture for controlling media gateways connected to the public switched telephone network (PSTN). The media gateways provide conversion of traditional electronic media to the Internet Protocol (IP) network. The protocol is a successor to the Simple Gateway Control Protocol (SGCP), which was developed by Bellcore and Cisco, and the Internet Protocol Device Control (IPDC).

<span class="mw-page-title-main">Media gateway control protocol architecture</span>

The media gateway control protocol architecture is a methodology of providing telecommunication services using decomposed multimedia gateways for transmitting telephone calls between an Internet Protocol network and traditional analog facilities of the public switched telephone network (PSTN). The architecture was originally defined in RFC 2805 and has been used in several prominent voice over IP (VoIP) protocol implementations, such as the Media Gateway Control Protocol (MGCP) and Megaco (H.248), both successors to the obsolete Simple Gateway Control Protocol (SGCP).

References