Smith & Wesson Model 27

Last updated
Smith & Wesson Model 27
Flickr - ~Steve Z~ - S^W Pre 27 Six Inch (4).jpg
Type Revolver
Place of originUnited States
Production history
Manufacturer Smith & Wesson
Produced1935–1994 (Original Model) [1]
2008–present (Classic Model)
VariantsModel 327 (scandium)
Model 627 (stainless steel)
Specifications
Barrel  length
  • 3 12 in (89 mm)
  • 4 in (102 mm)
  • 5 in (127 mm)
  • 6 in (153 mm)
  • 612 in (165 mm)
  • 838 in (214 mm)
  • 834 in (222 mm)
  • 1058 in (270 mm)

Cartridge .357 Magnum
Action Double-action
Feed systemSix-round cylinder
Sightsfixed front, adjustable rear

The Smith & Wesson Model 27 is a six-shot, double-action revolver chambered for the .357 Magnum cartridge and manufactured by the United States company Smith & Wesson. It was first produced in 1935, and many versions of it are still in production today. The Model 27 was built on S&W's carbon steel, large N-frame, had adjustable sights, and was available at various times with 312", 4", 5", 6", 612", 838", 834", or 1058" barrel lengths.

Contents

History

When first introduced by Smith & Wesson in 1935, it was known as the Registered Magnum.[ citation needed ] The model was essentially a custom-order revolver. Barrel lengths could be had in 14 inch (6.4 mm) increments from 3+12 to 8+34 inches (8.9 to 22.2 cm) inches in length. In addition to the different lengths of barrels available, there were different grips, front sights, triggers, hammers, and finishes available. Each Registered Magnum came with a certificate of authenticity.

Even though it was introduced in the middle of the Great Depression and was extremely expensive, Smith & Wesson found itself backlogged with orders for the four years that it produced the Registered Magnum.[ citation needed ] The Kansas City Police Department issued the Registered Magnum to its officers, and many other law enforcement officers across the United States carried the Registered Magnum. In 1939, Smith & Wesson stopped producing the Registered Magnum. It was replaced with the Model 27, which was available with barrel lengths of 3+12, 5, 6+12, and 8+34 inches (8.9, 12.7, 16.5, and 22.2 cm). It has been reported that these were the most popular barrel lengths for the Registered Magnum.[ citation needed ] Essentially, the Model 27 was still the Registered Magnum, but standardized for ease of production and economy. The Smith & Wesson Model 28 "Highway Patrolman" was introduced as a lower-cost version of the Model 27 in 1954, stripped of some of the features of the Model 27, such as polishing.

It was noted for its durability and reliability. The 312-inch barrel length was extremely popular with FBI agents from the 1940s through the 1970s. Skeeter Skelton considered the Model 27 with a 5-inch barrel as the best all-around handgun. General George Patton carried an ivory-handled Registered Magnum with a 312-inch barrel (along with his ivory-handled Colt Peacemaker); Patton called the Model 27 his "killing gun". [2]

Variants

Smith & Wesson Model 27-2 6"
Flickr - ~Steve Z~ - S^W 27 Nickel.jpg
Type Revolver
Place of originUnited States
Production history
Manufacturer Smith & Wesson Performance Center
Specifications
Mass37.6 ounces (1.07 kg)
Length7+58 inches (19 cm)
Barrel  length2+58 inches (6.7 cm)

Cartridge .357 Magnum
Action Double action
Feed system6-shot cylinder
SightsDovetail Red Ramp front sight
Outline White rear sight

The stainless steel Model 627 was introduced in 1989 as the "Model of 1989". It featured a 5+12-inch barrel, a 6-shot unfluted cylinder, and had a round butt with S&W Combat stocks.[ citation needed ]

In 1996, the Smith & Wesson Performance Center began production of an 8-shot 627. The 627 has a 2+58-inch (6.7 cm) barrel with no muzzle brake or ports. The cylinder is unfluted. The revolver is made of stainless steel, with a matte finish and wood grips.[ citation needed ]

Model 327

In 2008, the eight-shot, scandium-framed Smith & Wesson Model 327 was introduced. A variant of the 327, the 327NG, is part of the NightGuard line.[ citation needed ]

The Smith & Wesson Model 327PD is an eight-shot double-action revolver that has a 4-inch stainless steel barrel with no muzzle brake or ports. It has a scandium alloy frame and a titanium cylinder. It comes with rosewood Hogue grips. It uses a light-gathering HI-VIZ front sight and an adjustable V-notch rear sight. The revolver finish is a glare-reducing matte black, with a matte gray cylinder. [3]

The S&W TRR8 and M&P R8 (both including accessory rails for mounting lights and lasers) are recent advances of the 327 line.[ citation needed ]

Current production

Smith and Wesson now include the Model 27 in two variations in their current "Classics" Line of Revolvers. Both feature original style wooden combat grips per the post WW2 versions of the 27 and later 586 and 686 revolvers. Barrels are currently available in 4" and 6+12"; both feature adjustable sights. The 4" version has a pinned serrated ramp—style front sight, the 6+12" version has a traditional target Patridge-style front sight that is also pinned to the barrel.

Related Research Articles

<span class="mw-page-title-main">Colt Python</span> Revolver

The Colt Python is a double action revolver chambered for the .357 Magnum cartridge. It was first introduced in 1955 by the Colt's Manufacturing Company.

<span class="mw-page-title-main">Smith & Wesson Model 29</span> Revolver

The Smith & Wesson Model 29 is a six-shot, double-action revolver chambered for the .44 Magnum cartridge and manufactured by the United States company Smith & Wesson.

<span class="mw-page-title-main">Colt Anaconda</span> Revolver

The Colt Anaconda is a large frame double-action revolver featuring a full length under-barrel ejection-rod lug and six round cylinder, designed and produced by the Colt's Manufacturing Company in 1990. Chambered for the powerful .44 Magnum and .45 Colt centerfire ammunition cartridges, the Anaconda marked the Hartford, Connecticut firm's first foray into the popular large-bore Magnum pistol market.

<span class="mw-page-title-main">Smith & Wesson Model 500</span> Revolver

The Smith & Wesson Model 500 is a five-shot, double/single action large-caliber revolver produced by Smith & Wesson, firing the .500 S&W Magnum cartridge.

<span class="mw-page-title-main">Smith & Wesson Model 19</span> Revolver

The Smith & Wesson Model 19 is a revolver produced by Smith & Wesson that was introduced in 1957 on its K-frame. The Model 19 is chambered for .357 Magnum. The K-frame is somewhat smaller and lighter than the original N-frame .357, usually known as the Smith & Wesson Model 27. A stainless steel variant of the Model 19, the Smith & Wesson Model 66, was introduced in 1971.

<span class="mw-page-title-main">Colt King Cobra</span> Revolver

First introduced in 1986, the Colt King Cobra is a medium frame double-action revolver featuring a six round cylinder which was designed and produced by the Colt's Manufacturing Company and marketed to law enforcement agencies and civilian firearms enthusiasts. Available in blued and stainless steel finishes in a variety of barrel lengths and chambered for centerfire .357 Magnum ammunition.

<span class="mw-page-title-main">Smith & Wesson Model 586</span> Revolver

The Smith & Wesson Model 586, is a six- or seven-shot double-action revolver chambered for the .357 Magnum cartridge; it will also chamber and fire .38 Special cartridges. The Model 586 has a carbon steel construction and is available in a blued or nickel finish; it is essentially the same firearm as the Model 686, which has stainless steel construction. It is also known as the Distinguished Combat Magnum.

<span class="mw-page-title-main">Smith & Wesson Model 686</span> Revolver

The Smith & Wesson Model 686 is a six- or seven-shot double-action revolver manufactured by Smith & Wesson and chambered for the .357 Magnum cartridge; it will also chamber and fire .38 Special cartridges. Smith & Wesson introduced the Model 686 in 1981. It is the stainless steel version of the Model 586, which featured a blued steel finish. They are available ported and unported with a choice of 6- or 7-round cylinders.

<span class="mw-page-title-main">H&R Firearms</span> Firearms brand

Harrington & Richardson is an American brand of firearms and a subsidiary of JJE Capital Holdings. H&R ceased independent production February 27, 2015.

<span class="mw-page-title-main">Smith & Wesson Model 625</span> Revolver

The Smith & Wesson Model 625, is a six-round, double-action revolver chambered for the .45 ACP using moon clips. The Model 625 is an improved stainless steel version Smith & Wesson Model 22 and a direct descendant of the Smith & Wesson M1917 revolver first issued during World War I.

<span class="mw-page-title-main">Smith & Wesson Model 15</span> Revolver

The Smith & Wesson Model 15, initially the Smith & Wesson K-38 Combat Masterpiece, is a six-shot double-action revolver with adjustable open sights produced by Smith & Wesson on the medium-size "K" frame. It is chambered for the .38 Special cartridge and is fitted with a 4-inch (100 mm) barrel, though additional barrel options have been offered at various times during its production. It is essentially a shorter barrel version of the Smith & Wesson Model 14 and an adjustable-sight version of the seminal Smith & Wesson Model 10 with target shooting features.

<span class="mw-page-title-main">Smith & Wesson Model 17</span> Revolver

The Smith & Wesson Model 17 is a six-shot double-action revolver chambered for .22 LR. It is built on Smith & Wesson's medium-sized K-frame.

<span class="mw-page-title-main">Ruger Blackhawk</span> Revolver

The Ruger Blackhawk is a six-shot, single-action revolver manufactured by Sturm, Ruger & Co. It is produced in a variety of finishes, calibers, and barrel lengths.

<span class="mw-page-title-main">Ruger GP100</span> Revolver

The GP100 is a family/line of double action five-, six-, seven-, or ten-shot revolvers made by Sturm, Ruger & Co., manufactured in the United States. Since its introduction, it has been produced with a number of variations including various barrel lengths and profiles, fixed or adjustable sights, and in blued carbon steel or stainless steel.

<span class="mw-page-title-main">Ruger Super Redhawk</span> Revolver

The Super Redhawk is a line of double-action magnum revolvers made by Sturm, Ruger beginning in 1987, when Ruger started making weapons using larger, more powerful cartridges such as .44 Magnum, .454 Casull, and .480 Ruger.

<span class="mw-page-title-main">Snubnosed revolver</span> Type of gun

A snubnosed revolver is a small, medium, or large frame revolver with a short barrel, generally less than 4 inches in length. Smaller such revolvers are often made with "bobbed" or "shrouded" hammers and there are also "hammerless" models ; the point is to allow the gun to be drawn with little risk of it snagging on clothing. Since the external movement of the mechanism is minimal or nil, shrouded and hammerless models may be fired from within clothing. The design of these revolvers compromises range and accuracy at a distance in favor of maneuverability and ease of carry and concealment.

<span class="mw-page-title-main">Smith & Wesson Model 13</span> US Revolver

The Smith & Wesson Model 13 is a .357 Magnum revolver designed for military and police use. It is based on Smith & Wesson's K-frame—specifically, it is a .357 Magnum version of the heavy-barrel variant of the .38 Special Model 10.

<span class="mw-page-title-main">Smith & Wesson Model 640</span> Revolver

The Smith & Wesson Model 640 revolver is a 5-shot snubnosed revolver that is chambered in either .38 Special or .357 Magnum caliber introduced in 1989. Like other "J-frame" Smith & Wesson revolvers, it has a swing-out cylinder, but this model features a concealed hammer, and is part of the Centennial line.

<span class="mw-page-title-main">Smith & Wesson Governor</span> Revolver

The Smith & Wesson Governor is a snub-nosed single-action/double-action revolver built on the Z-frame and utilizes a K-frame grip with a lightweight scandium alloy or stainless steel frame.

<span class="mw-page-title-main">Smith & Wesson Model 1 1/2</span> Revolver

The Smith & Wesson Model 1+12 was Smith & Wesson's second .32 caliber revolver, intended to combine the small size and convenience of the .22 caliber Model 1 with the larger caliber of the 6-shot "belt sized" Model 2, which was introduced in 1861. Chambered in .32 Rimfire, its cylinder held 5 shots. It was produced in three varieties from 1865 through 1892, with total production exceeding 223,000.

References

  1. Scepaniak, A. (July 22, 2020). Wheelgun Wednesday: Old Iron - Smith & Wesson Model 27 .357 Magnum. Retrieved March 6, 2022.
  2. Province, Charles M. (1982-12-01). The Unknown Patton. New York: Hippocrene Books. p. 41. ISBN   978-0-88254-641-4. OCLC   8785966.
  3. Jarrett, William S. (2009). Shooter's Bible (101st ed.). New York: Skyhorse Publishing. p. 110. ISBN   978-1-60239-801-6. OCLC   320193287.