Smoke testing (electrical)

Last updated February 22, 2019

Smoke testing refers to various classes of tests of systems, usually intended to determine whether they are ready for more robust testing. The expression probably was first used in plumbing in referring to tests for the detection of cracks, leaks or breaks in closed systems of pipes.^[1] By metaphorical extension the term is used in electronics. In Lessons Learned in Software Testing, Cem Kaner, James Bach, and Brett Pettichord provided the origin of the term: "The phrase smoke test comes from electronic hardware testing. You plug in a new board and turn on the power. If you see smoke coming from the board, turn off the power. You don't have to do any more testing."^[2]

Plumbing is any system that conveys fluids for a wide range of applications. Plumbing uses pipes, valves, plumbing fixtures, tanks, and other apparatuses to convey fluids. Heating and cooling (HVAC), waste removal, and potable water delivery are among the most common uses for plumbing, but it is not limited to these applications. The word derives from the Latin for lead, plumbum, as the first effective pipes used in the Roman era were lead pipes.

Smoke testing refers to various classes of tests of systems, usually intended to determine whether they are ready for more robust testing. The expression probably was first used in plumbing in referring to tests for the detection of cracks, leaks or breaks in closed systems of pipes.

Electronics comprises the physics, engineering, technology and applications that deal with the emission, flow and control of electrons in vacuum and matter. The identification of the electron in 1897, along with the invention of the vacuum tube, which could amplify and rectify small electrical signals, inaugurated the field of electronics and the electron age.

Smoke testing in electronics and electrical engineering

In electronics and electrical engineering, the term smoke test or power on test is used to refer to the first time a circuit under development is attached to power, which will sometimes produce actual smoke if a design or wiring mistake has been made. Most often, this smoke comes from burning resistors, which produce a unique smell. For certain circuits, overheating and burning due to circuitry that is still not properly operating can be avoided by slowly turning up the input voltage to the unit under test by using a variable autotransformer and watching the electric current consumption.^{[ citation needed ]}

Electrical engineering is a professional engineering discipline that generally deals with the study and application of electricity, electronics, and electromagnetism. This field first became an identifiable occupation in the later half of the 19th century after commercialization of the electric telegraph, the telephone, and electric power distribution and use. Subsequently, broadcasting and recording media made electronics part of daily life. The invention of the transistor, and later the integrated circuit, brought down the cost of electronics to the point they can be used in almost any household object.

Resistor Passive electrical component providing electrical resistance

A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses. High-power resistors that can dissipate many watts of electrical power as heat, may be used as part of motor controls, in power distribution systems, or as test loads for generators. Fixed resistors have resistances that only change slightly with temperature, time or operating voltage. Variable resistors can be used to adjust circuit elements, or as sensing devices for heat, light, humidity, force, or chemical activity.

An autotransformer is an electrical transformer with only one winding. The "auto" prefix refers to the single coil acting alone, not to any kind of automatic mechanism. In an autotransformer, portions of the same winding act as both the primary and secondary sides of the transformer. In contrast, an ordinary transformer has separate primary and secondary windings which are not electrically connected.

Overloaded integrated circuits typically produce "blue smoke" (or magic smoke). "Blue smoke" is the subject of jokes among technicians who refer to it as if it were a genie in the circuit: It's the blue smoke that makes it work——let out the blue smoke and it won't do anything.

Magic smoke is a humorous name for the caustic smoke produced by burning out electronic circuits or components, which is held to contain the essence of the component's function. The smoke typically smells of burning plastic and other chemicals, and sometimes contains specks of sticky black ash. The color of the smoke depends on which component is overheating, but it is commonly white or grey. Simple overheating eventually results in component failure, but does not release smoke. Real smoke is almost always the result of incorrect wiring or a manufacturing failure in the component.

Related Research Articles

Software testing is an investigation conducted to provide stakeholders with information about the quality of the software product or service under test. Software testing can also provide an objective, independent view of the software to allow the business to appreciate and understand the risks of software implementation. Test techniques include the process of executing a program or application with the intent of finding software bugs, and verifying that the software product is fit for use.

The Vectrex is a vector display-based home video game console that was developed by Western Technologies/Smith Engineering. It was licensed and distributed first by General Consumer Electronics (GCE), and then by Milton Bradley Company after its purchase of GCE. It was released in November 1982 at a retail price of $199 ; as Milton Bradley took over international marketing the price dropped to $150, then reduced again to $100 shortly before the video game crash of 1983 and finally retailed at $49 after the crash. The Vectrex went off the console market in early 1984.

Digital electronics Electronic circuits that utilize digital signals

Digital electronics or digital (electronic) circuits are electronics that operate on digital signals. In contrast, analog circuits manipulate analog signals whose performance is more subject to manufacturing tolerance, signal attenuation and noise. Digital techniques are helpful because it is a lot easier to get an electronic device to switch into one of a number of known states than to accurately reproduce a continuous range of values.

Direct current (DC) is the unidirectional flow of electric charge. A battery is a good example of a DC power supply. Direct current may flow in a conductor such as a wire, but can also flow through semiconductors, insulators, or even through a vacuum as in electron or ion beams. The electric current flows in a constant direction, distinguishing it from alternating current (AC). A term formerly used for this type of current was galvanic current.

A breadboard is a construction base for prototyping of electronics. Originally it was literally a bread board, a polished piece of wood used for slicing bread. In the 1970s the solderless breadboard became available and nowadays the term "breadboard" is commonly used to refer to these.

In-circuit emulation (ICE) is the use of a hardware device or in-circuit emulator used to debug the software of an embedded system. It operates by using a processor with the additional ability to support debugging operations, as well as to carry out the main function of the system. Particularly for older systems, with limited processors, this usually involved replacing the processor temporarily with a hardware emulator: a more powerful although more expensive version. It was historically in the form of bond-out processor which has many internal signals brought out for the purpose of debugging. These signals provide information about the state of the processor.

Most software systems have installation procedures that are needed before they can be used for their main purpose. Testing these procedures to achieve an installed software system that may be used is known as installation testing. These procedure may involve full or partial upgrades, and install/uninstall processes.

Exploratory testing is an approach to software testing that is concisely described as simultaneous learning, test design and test execution. Cem Kaner, who coined the term in 1984, defines exploratory testing as "a style of software testing that emphasizes the personal freedom and responsibility of the individual tester to continually optimize the quality of his/her work by treating test-related learning, test design, test execution, and test result interpretation as mutually supportive activities that run in parallel throughout the project."

Electronics manufacturing services (EMS) is a term used for companies that design, manufacture, test, distribute, and provide return/repair services for electronic components and assemblies for original equipment manufacturers (OEMs). The concept is also referred to as electronics contract manufacturing (ECM).

Certification refers to the confirmation of certain characteristics of an object, person, or organization. This confirmation is often, but not always, provided by some form of external review, education, assessment, or audit. Accreditation is a specific organization's process of certification. According to the National Council on Measurement in Education, a certification test is a credentialing test used to determine whether individuals are knowledgeable enough in a given occupational area to be labeled "competent to practice" in that area.

The Microsoft interview is a job interview technique used by Microsoft to assess possible future Microsoft employees. It is significant because Microsoft's model was pioneering, and later picked up and developed by other companies including Amazon, Facebook, and Google.

The Association for Software Testing, commonly referred to as the AST, is dedicated to advancing the understanding of the science and practice of software testing according to context-driven principles. AST's membership consists of scholars, students and practitioners who are interested in the advancement of the field of software testing. The group was founded in the United States in 2004 by Cem Kaner.

Cem Kaner J.D., Ph.D., is a Professor of Software Engineering at Florida Institute of Technology, and the Director of Florida Tech's Center for Software Testing Education & Research (CSTER) since 2004. He is perhaps best known outside academia as an advocate of software usability and software testing.

Functional testing is a quality assurance (QA) process and a type of black-box testing that bases its test cases on the specifications of the software component under test. Functions are tested by feeding them input and examining the output, and internal program structure is rarely considered. Functional testing usually describes what the system does.

There is considerable variety among software testing writers and consultants about what constitutes responsible software testing. Prominent members of the Context-Driven School of Testing consider much of the writing about software testing to be doctrine, mythology, and folklore. Some contend that this belief directly contradicts standards such as the IEEE 829 test documentation standard, and organizations such as the Food and Drug Administration who promote them. The Context-Driven School's retort is that Lessons Learned in Software Testing includes one lesson supporting the use IEEE 829 and another opposing it; that not all software testing occurs in a regulated environment and that practices appropriate for such environments would be ruinously expensive, unnecessary, and inappropriate for other contexts; and that in any case the FDA generally promotes the principle of the least burdensome approach.

Passivity is a property of engineering systems, used in a variety of engineering disciplines, but most commonly found in analog electronics and control systems. A passive component, depending on field, may be either a component that consumes but does not produce energy or a component that is incapable of power gain.

James Marcus Bach is a software tester, author, trainer and consultant. He is a proponent of exploratory testing and the context-driven school of software testing and is credited with developing session-based testing. He was a member of the Board of Directors of the Association for Software Testing. Lessons Learned in Software Testing, a book he co-authored, has been cited over 130 times according to Google Scholar, and several of his articles have been cited dozens of times including his work on heuristics for testing and on the Capability Maturity Model. He has written numerous articles for IEEE Computer.

In computer programming and software testing, smoke testing is preliminary testing to reveal simple failures severe enough to, for example, reject a prospective software release. Smoke tests are a subset of test cases that cover the most important functionality of a component or system, used to aid assessment of whether main functions of the software appear to work correctly. When used to determine if a computer program should be subjected to further, more fine-grained testing, a smoke test may be called an intake test. Alternately, it is a set of tests run on each new build of a product to verify that the build is testable before the build is released into the hands of the test team. In the DevOps paradigm, use of a BVT step is one hallmark of the continuous integration maturity stage.

References

↑ Stevenson, Thomas. A Treatise on Hygiene and Public Health, Volume 1. J. & A. Churchill. 1892.
↑ Kaner, Bach, and Pettichord. Lessons Learned in Software Testing. Wiley Computer Publishing, 2002, p. 95. ISBN 0-471-08112-4

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[1] Stevenson, Thomas. A Treatise on Hygiene and Public Health, Volume 1. J. & A. Churchill. 1892.

[KanerBachPettichord2002-2] Kaner, Bach, and Pettichord. Lessons Learned in Software Testing. Wiley Computer Publishing, 2002, p. 95. ISBN 0-471-08112-4