Nosing projection
In timber flights, The nosing traditionally projects forward of the riser, the same distance as the thickness of the tread material. [1]
Nosing is the horizontal, protruding edge of a stair where most foot traffic frequently occurs.
The horizontal projection to the front of a tread where most foot traffic frequently occurs. The nosing is the protrusion beyond the riser when vertical risers are used, or beyond the back of the tread below, when angled risers or no risers are used. Anti-slip strips or nosings may be applied. These stair parts can be manufactured from a variety of materials including aluminum, vinyl, and wood.
The landing nosing will often travel into the landing area to border the bottom of the balusters. The projection over the landing face will be the same as for the treads in the staircase.
In timber flights, The nosing traditionally projects forward of the riser, the same distance as the thickness of the tread material. [1]
Stair nosing, especially in commercial and industrial settings, are typically fitted with a non-slip surface to increase traction and prevent injury or even death from slips, trips, and falls. The National Safety Council reports that there are over one million stair-related accidents every year. [2] Installing anti-slip nosing is a proven method of accident prevention.
Many states have introduced laws and mandates that require new staircase construction to include an abrasive surface or stair tread to minimize the risk of stairway related incidents. One notable instance of this type of building regulation is 'Title 24, Part 2, Section 2-3326(b)' of the California Energy Commission's "Building Energy Efficiency Program". [3]
The regulation contains a detailed set of rules that must be followed when installing new steps in settings like municipal buildings, industrial plants, schools, etc. Perhaps the most recognizable standard in California's Title 24 building code is the need for a slip-resistant tread or nosing that is of contrasting color from the steps. This regulation affects not only future stair installations, but existing stairs as well. The purpose of this is to increase the discernibility of each step to prevent accidents for those who may be visually-impaired. [4]
A tire or tyre is a ring-shaped component that surrounds a wheel's rim to transfer a vehicle's load from the axle through the wheel to the ground and to provide traction on the surface over which the wheel travels. Most tires, such as those for automobiles and bicycles, are pneumatically inflated structures, which also provide a flexible cushion that absorbs shock as the tire rolls over rough features on the surface. Tires provide a footprint, called a contact patch, that is designed to match the weight of the vehicle with the bearing strength of the surface that it rolls over by providing a bearing pressure that will not deform the surface excessively.
A heliport is a small airport suitable for use by helicopters and some other vertical lift aircraft. Designated heliports typically contain one or more touchdown and liftoff areas and may also have limited facilities such as fuel or hangars. In some larger towns and cities, customs facilities may also be available.
Stairs are a structure designed to bridge a large vertical distance between lower and higher levels by dividing it into smaller vertical distances. This is achieved as a diagonal series of horizontal platforms called steps which enable passage to the other level by stepping from one to another step in turn. Steps are very typically rectangular. Stairs may be straight, round, or may consist of two or more straight pieces connected at angles.
A newel, also called a central pole or support column, is the central supporting pillar of a staircase. It can also refer to an upright post that supports and/or terminates the handrail of a stair banister. In stairs having straight flights it is the principal post at the foot of the staircase, but the term can also be used for the intermediate posts on landings and at the top of a staircase. Although its primary purpose is structural, newels have long been adorned with decorative trim and designed in different architectural styles.
The 1971 San Fernando earthquake occurred in the early morning of February 9 in the foothills of the San Gabriel Mountains in southern California. The unanticipated thrust earthquake had a magnitude of 6.5 on the Ms scale and 6.6 on the Mw scale, and a maximum Mercalli intensity of XI (Extreme). The event was one in a series that affected Los Angeles county in the late 20th century. Damage was locally severe in the northern San Fernando Valley and surface faulting was extensive to the south of the epicenter in the mountains, as well as urban settings along city streets and neighborhoods. Uplift and other effects affected private homes and businesses.
The steel square is a tool used in carpentry. Carpenters use various tools to lay out structures that are square, many of which are made of steel, but the name steel square refers to a specific long-armed square that has additional uses for measurement, especially of various angles. It consists of a long, wider arm and a shorter, narrower arm, which meet at an angle of 90 degrees. Today the steel square is more commonly referred to as the framing square or carpenter's square, and such squares are no longer invariably made of steel ; they can also be made of aluminum or polymers, which are light and resistant to rust.
A handrail is a rail that is designed to be grasped by the hand so as to provide safety or support. In Britain, handrails are referred to as banisters. Handrails are usually used to provide support for body or to hold clothings in a bathroom or similar areas. Handrails are commonly used while ascending or descending stairways and escalators in order to prevent injurious falls or to hold necessities. Handrails are typically supported by balusters or attached to walls.
Guard rail, guardrails, or protective guarding, in general, are a boundary feature and may be a means to prevent or deter access to dangerous or off-limits areas while allowing light and visibility in a greater way than a fence. Common shapes are flat, rounded edge, and tubular in horizontal railings, whereas tetraform spear-headed or ball-finialled are most common in vertical railings around homes. Park and garden railings commonly in metalworking feature swirls, leaves, plate metal areas and/or motifs particularly on and beside gates.
Tread plate, also known as checker plate and diamondplate, is a type of metal stock with a regular pattern or lines on one side for slip resistance. The most common alloy used for aluminum tread plate is 6061, although 5086-H34 and 3003-H231 are also used. Diamond plate is usually steel, stainless steel or aluminium. Steel types are normally made by hot rolling, although modern manufacturers also make a raised and pressed diamond design.
Lock out, tag out (LOTO) is a safety procedure used to ensure that dangerous equipment is properly shut off and not able to be started up again prior to the completion of maintenance or repair work. It requires that hazardous energy sources be "isolated and rendered inoperative" before work is started on the equipment in question. The isolated power sources are then locked and a tag is placed on the lock identifying the worker and reason the LOTO is placed on it. The worker then holds the key for the lock, ensuring that only they can remove the lock and start the equipment. This prevents accidental startup of equipment while it is in a hazardous state or while a worker is in direct contact with it.
A loading dock or loading bay is an area of a building where goods vehicles are loaded and unloaded. They are commonly found on commercial and industrial buildings, and warehouses in particular. Loading docks may be exterior, flush with the building envelope, or fully enclosed. They are part of a facility's service or utility infrastructure, typically providing direct access to staging areas, storage rooms, and freight elevators.
Noise control or noise mitigation is a set of strategies to reduce noise pollution or to reduce the impact of that noise, whether outdoors or indoors.
Stair climbing is the climbing of a flight of stairs. It is often described as a "low-impact" exercise, often for people who have recently started trying to get in shape. A common exhortation in health pop culture is "Take the stairs, not the elevator".
A stair lift is a mechanical device for lifting people, typically those with disabilities, up and down stairs. For sufficiently wide stairs, a rail is mounted to the treads of the stairs. A chair or lifting platform is attached to the rail. A person gets onto the chair or platform and is lifted up or down the stairs by the chair which moves along the rail.
A stair rod, also commonly referred to as a carpet rod, is an ornamental decorative hardware item used to hold carpeting in place on steps.. Traditionally, stair rods were used to hold a carpet runner in place on stairs, but with superior carpet installation techniques and more rigid safety standards today, stair rods serve primarily a decorative purpose. Stair rods are however still an integral part of many installation techniques. They hide dimples in the carpet runner caused by installation staples or nail heads and they are also often required to conceal a pattern mismatch when the carpet runner is cut during installation at each step where the tread meets the riser.
A runway excursion is a runway safety incident in which an aircraft makes an inappropriate exit from the runway. Runway excursions include runway overruns, which occur when an aircraft is unable to stop before it reaches the end of the runway. Runway excursions can happen because of pilot error, poor weather, or a fault with the aircraft.
An elevator or lift is a machine that vertically transports people or freight between levels. They are typically powered by electric motors that drive traction cables and counterweight systems such as a hoist, although some pump hydraulic fluid to raise a cylindrical piston like a jack.
An escalator is a moving staircase which carries people between floors of a building or structure. It consists of a motor-driven chain of individually linked steps on a track which cycle on a pair of tracks which keep the step tread horizontal.
Sustainable Slip Resistance is a particular floor friction testing method and selection criteria for use in choosing and sourcing slip-resistant flooring that maintains good tribological characteristics over its life cycle to minimize slip and fall accidents. Testing floors before and after they are in place on a property can assure a building owner that safe flooring has been chosen and installed for its intended use. This floor slip resistance testing method, developed by the McDonald's Restaurant chain and now specified by many other property owners assesses the effects of mild abrasion on wet slip resistance. This test identifies flooring that has a high propensity to lose its wet slip resistance.
A stair tread is the horizontal portion of a set of stairs on which a person walks. The tread can be composed of wood, metal, plastic, or other materials. In residential settings, treads can be covered in carpeting. Stair treads can come in non-slip varieties, particularly in commercial or industrial locations.