| Standards of Weights and Measures Act, 1976 | |
|---|---|
| Parliament of India | |
| |
| Citation | Act No. 60 of 1976 |
| Enacted by | Parliament of India |
| Enacted | 8 April 1976 |
| Commenced | 20 September 1977 |
| Status: Repealed | |
The Standards of Weights and Measures Act, 1976 was an Act of the Parliament of India enacted to establish standards of weights and measures, and to regulate trade or commerce in weights, measures, and other goods sold or distributed by weight, measure, or number. The Act aimed to ensure uniformity and accuracy in weights and measures across India. [1]
The Act was introduced to replace the Standards of Weights and Measures Act, 1956, which was based on the metric system and international units recognized by the International Organization of Legal Metrology (OIML). The 1976 Act was enacted to keep pace with rapid advances in science and technology worldwide and to adopt the International System of Units (SI units) as recommended by the General Conference of Weights and Measures (CGPM). [2]
The Act established weights and measures based on SI units, as adopted by the CGPM and recognized by the OIML. It provided specifications for measuring instruments used in commercial transactions, industrial production, and measurements involved in public health and human safety. [3]
The Act regulated inter-state trade and commerce in weights and measures, as well as commodities sold, distributed, or supplied by weight or measure. It also regulated pre-packed commodities sold or intended to be sold in the course of inter-state commerce. [3]
The Act required approval of models of weights and measuring instruments before manufacture. [3]
It provided for the control and regulation of export and import of weights and measures and commodities in packaged form. [3]
The Act established the Indian Institute of Legal Metrology to provide training in legal metrology to inspectors and others. [3]
The Act granted powers to inspectors for inspection, search, seizure, and forfeiture of non-standard weights or measures. It also provided for the prosecution of offenses and the power to compound certain cases. [3]
The Standards of Weights and Measures Act, 1976, along with the Standards of Weights and Measures (Enforcement) Act, 1985, was repealed and replaced by the Legal Metrology Act, 2009, which came into effect on 1 April 2011. The new Act aimed to further modernize and streamline the regulation of weights and measures in India.
The Legal Metrology Act, 2009 retained many provisions of the 1976 Act while introducing new features to address contemporary challenges in weights and measures regulation. It continued to emphasize the establishment and enforcement of standards, regulation of trade and commerce, and protection of consumer interests. [4]
The International Bureau of Weights and Measures is an intergovernmental organisation, through which its 64 member-states act on measurement standards in areas including chemistry, ionising radiation, physical metrology, as well as the International System of Units (SI) and Coordinated Universal Time (UTC). It is based in Saint-Cloud, near Paris, France. The organisation has been referred to as IBWM in older literature.
The General Conference on Weights and Measures is the supreme authority of the International Bureau of Weights and Measures (BIPM), the intergovernmental organization established in 1875 under the terms of the Metre Convention through which member states act together on matters related to measurement science and measurement standards. The CGPM is made up of delegates of the governments of the member states and observers from the Associates of the CGPM. It elects the International Committee for Weights and Measures as the supervisory board of the BIPM to direct and supervise it.
The imperial system of units, imperial system or imperial units is the system of units first defined in the British Weights and Measures Act 1824 and continued to be developed through a series of Weights and Measures Acts and amendments.
The kilogram is the base unit of mass in the International System of Units (SI), having the unit symbol kg. 'Kilogram' means 'one thousand grams' and is colloquially abbreviated to kilo.
Measurement is the quantification of attributes of an object or event, which can be used to compare with other objects or events. In other words, measurement is a process of determining how large or small a physical quantity is as compared to a basic reference quantity of the same kind. The scope and application of measurement are dependent on the context and discipline. In natural sciences and engineering, measurements do not apply to nominal properties of objects or events, which is consistent with the guidelines of the International vocabulary of metrology published by the International Bureau of Weights and Measures. However, in other fields such as statistics as well as the social and behavioural sciences, measurements can have multiple levels, which would include nominal, ordinal, interval and ratio scales.
The Metre Convention, also known as the Treaty of the Metre, is an international treaty that was signed in Paris on 20 May 1875 by representatives of 17 nations: Argentina, Austria-Hungary, Belgium, Brazil, Denmark, France, Germany, Italy, Peru, Portugal, Russia, Spain, Sweden and Norway, Switzerland, Ottoman Empire, United States of America, and Venezuela.
The International System of Units, internationally known by the abbreviation SI, is the modern form of the metric system and the world's most widely used system of measurement. It is the only system of measurement with official status in nearly every country in the world, employed in science, technology, industry, and everyday commerce. The SI system is coordinated by the International Bureau of Weights and Measures which is abbreviated BIPM from French: Bureau international des poids et mesures.
Metrology is the scientific study of measurement. It establishes a common understanding of units, crucial in linking human activities. Modern metrology has its roots in the French Revolution's political motivation to standardise units in France when a length standard taken from a natural source was proposed. This led to the creation of the decimal-based metric system in 1795, establishing a set of standards for other types of measurements. Several other countries adopted the metric system between 1795 and 1875; to ensure conformity between the countries, the Bureau International des Poids et Mesures (BIPM) was established by the Metre Convention. This has evolved into the International System of Units (SI) as a result of a resolution at the 11th General Conference on Weights and Measures (CGPM) in 1960.
The kilogram-force, or kilopond, is a non-standard gravitational metric unit of force. It is not accepted for use with the International System of Units (SI) and is deprecated for most uses. The kilogram-force is equal to the magnitude of the force exerted on one kilogram of mass in a 9.80665 m/s2 gravitational field. That is, it is the weight of a kilogram under standard gravity. One kilogram-force is defined as 9.80665 N. Similarly, a gram-force is 9.80665 mN, and a milligram-force is 9.80665 μN.
The stone or stone weight is an English and British imperial unit of mass equal to 14 avoirdupois pounds (6.35 kg). The stone continues in customary use in the United Kingdom and Ireland for body weight.
The Metric Martyrs was a British advocacy group who campaigned for the freedom to choose what units of measurement are used by traders. The group believed that vendors should have the freedom to mark their goods with imperial weights and measurements alone. This opposes the current legal position that imperial units may be used so long as metric units are also displayed.

The International Organization of Legal Metrology, is an intergovernmental organisation that was created in 1955 to promote the global harmonisation of the legal metrology procedures that underpin and facilitate international trade.
Metrication is the act or process of converting to the metric system of measurement. The United Kingdom, through voluntary and mandated laws, has metricated most of government, industry, commerce, and scientific research to the metric system; however, the previous measurement system is still used in society. Imperial units as of 2024 remain mandated by law to still be used without metric units for speed and distance road signs, and the sizes of cider and beer sold by the glass, returnable milk containers and precious metals, and in some areas both measurement systems are mandated by law.
The Ministry of Consumer Affairs, Food and Public Distribution is a government ministry of India. The ministry is headed by a Cabinet rank minister.
In common usage, the mass of an object is often referred to as its weight, though these are in fact different concepts and quantities. Nevertheless, one object will always weigh more than another with less mass if both are subject to the same gravity.
In metrology, a standard is an object, system, or experiment that bears a defined relationship to a unit of measurement of a physical quantity. Standards are the fundamental reference for a system of weights and measures, against which all other measuring devices are compared. Historical standards for length, volume, and mass were defined by many different authorities, which resulted in confusion and inaccuracy of measurements. Modern measurements are defined in relationship to internationally standardized reference objects, which are used under carefully controlled laboratory conditions to define the units of length, mass, electrical potential, and other physical quantities.
The following outline is provided as an overview of and topical guide to the metric system:
The imperial and US customary measurement systems are both derived from an earlier English system of measurement which in turn can be traced back to Ancient Roman units of measurement, and Carolingian and Saxon units of measure.
The Legal Metrology Act, 2009 is an Act of the Parliament of India that establishes and enforces standards of weights and measures in India. It was enacted to replace the Standards of Weights and Measures Act, 1976 and the Standards of Weights and Measures (Enforcement) Act, 1985.
The Indian Institute of Legal Metrology (IILM) is a statutory body established by the Government of India under the provisions of the Standards of Weights and Measures Act, 1976, and is deemed to have been established under section 21 of the Legal Metrology Act, 2009. It is located in Ranchi, India, and operates under the direct control of the Ministry of Consumer Affairs, Food and Public Distribution, Department of Consumer Affairs.