Stern ST 87 Vega

Last updated

ST 87 Vega
Role Homebuilt aircraft
National origin France
DesignerRene Stern
First flightJuly 1992
StatusPlans available (2014)
Number built2 (1998)

The Stern ST 87 Vega (sometimes ST-87) is a French homebuilt aircraft that was designed by Rene Stern, first flying in July 1992. The aircraft is supplied in the form of plans for amateur construction. [1]

Contents

Design and development

The ST 87 Vega features a cantilever low-wing, a two-seats-in-side-by-side configuration enclosed cockpit under a bubble canopy, fixed conventional landing gear with wheel pants and a single engine in tractor configuration. [1]

The aircraft is made from wood, with its flying surfaces covered in doped aircraft fabric. Its 7.62 m (25.0 ft) span wing mounts flaps and has a wing area of 10.0 m2 (108 sq ft). The cabin width is 110 cm (43 in). The acceptable power range is 85 to 125 hp (63 to 93 kW) and the standard engine used is the 108 hp (81 kW) Lycoming O-235 powerplant. [1]

The ST 87 Vega has a typical empty weight of 469 kg (1,034 lb) and a gross weight of 726 kg (1,601 lb), giving a useful load of 257 kg (567 lb). With full fuel of 110 litres (24 imp gal; 29 US gal) the payload for the pilot, passenger and baggage is 175 kg (386 lb). [1]

The manufacturer estimates the construction time from the supplied kit as 2000 hours. [1]

Operational history

By 1998 the company reported that four kits had been sold and two aircraft were completed and flying. [1]

Specifications (ST 87 Vega)

Data from AeroCrafter [1]

General characteristics

Performance

Related Research Articles

The Lucas L6 is a French all-metal monoplane design for homebuilding by Emile Lucas.

The Australian Aircraft Kits Hornet STOL is an Australian ultralight aircraft, designed and produced by Australian Aircraft Kits and introduced in 2004. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.

Wickham B

The Wickham B is an American experimental twin engined, homebuilt aircraft.

ULBI Wild Thing

The ULBI Wild Thing is a German ultralight aircraft, designed by R. Kurtz and produced by Ultraleicht Bau International (ULBI), of Hassfurt. The aircraft was supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.

The Peña Bilouis is a French aerobatic amateur-built aircraft that was designed by the competitive aerobatic pilot Louis Peña of Dax, Landes and made available in the form of plans for amateur construction.

The Peña Capeña is a French aerobatic amateur-built aircraft that was designed by competitive aerobatic pilot Louis Peña of Dax, Landes and made available in the form of plans for amateur construction.

The Adventure Air Adventurer is a family of American homebuilt amphibious flying boats that was designed and produced by Adventure Air of Berryville, Arkansas. When it was available the aircraft was supplied as a kit for amateur construction. The company appears to be out of business.

The Explorer Ellipse is an American homebuilt aircraft that was designed by Dean Wilson and produced by Explorer Aviation of Grangeville, Idaho. When it was available the aircraft was supplied as a kit for amateur construction.

The ICP Amigo is an Italian homebuilt aircraft that was designed and produced by ICP srl of Piovà Massaia. When it was available the aircraft was supplied as a kit for amateur construction.

The Junkers Profly Ultima is a German aerobatic homebuilt aircraft that was designed by Andre Konig and produced by Junkers Profly of Kodnitz, introduced in 1993. When it was available the aircraft was supplied as a kit for amateur construction.

Vidor Champion V

The Vidor Champion V is an Italian homebuilt aircraft that was designed by Giuseppe Vidor, first flying on 10 June 1995. The aircraft is supplied in the form of plans for amateur construction. It is also known as the Asso Aerei V Champion.

The Lucas L-6B is a French homebuilt aircraft that was designed by Émile Lucas. When it was available the aircraft was supplied in the form of plans for amateur construction.

The Microleve ML 450 is a Brazilian microlight aircraft that was designed and produced by Microleve of Rio de Janeiro. When it was available the aircraft was supplied as a complete ready-to-fly-aircraft or as a kit for amateur construction.

The Sea Storm is an Italian homebuilt amphibious flying boat that was designed and produced by Storm Aircraft of Sabaudia. Storm Aircraft was originally called SG Aviation srl. When it was available the aircraft was supplied as a kit for amateur construction.

The Sands Fokker Dr.1 Triplane is an American homebuilt aircraft that was designed by Ron Sands Sr of Mertztown, Pennsylvania and produced by Wicks Aircraft and Motorsports. It is a full-sized replica fighter aircraft based upon the 1917-vintage Fokker Dr.1. The aircraft is supplied as a kit and in the form of plans for amateur construction.

The Tech Aero TR 200 is a French homebuilt aerobatic aircraft that was designed and produced by Tech Aero of Glisolles, first flown in August 1988. When it was available the aircraft was supplied as a kit for amateur construction.

The American Homebuilts John Doe is an American STOL homebuilt aircraft that was designed by Steve Nusbaum and produced by American Homebuilts of Hebron, Illinois, first flown in 1994. When it was available the aircraft was supplied as a kit for amateur construction.

Bede BD-12 American homebuilt airplane

The Bede BD-12 was an American homebuilt aircraft designed by Jim Bede and produced by Bede Aircraft of Medina, Ohio, introduced in the 1990s. The aircraft was intended to be supplied as a kit for amateur construction, but only one was ever built.

Brutsche Freedom 210 STOL

The Brutsche Freedom 210 STOL was a proposed American STOL homebuilt aircraft that was designed by Neal H. Brutsche and intended to be produced by Brutsche Aircraft Corporation of Salt Lake City, Utah, introduced in the mid-1990s. The aircraft was planned to be supplied as a kit for amateur construction.

The Ibis GS-750 Grand Magic is a Colombian homebuilt aircraft, designed and produced by Ibis Aircraft of Cali, introduced in 2006. The aircraft is supplied as a complete ready-to-fly-aircraft or as a kit for amateur construction.

References

  1. 1 2 3 4 5 6 7 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition, page 200. BAI Communications, 15 July 1998. ISBN   0-9636409-4-1
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.