Strati (automobile)

Last updated
Overall view of Strati Strati overall.jpg
Overall view of Strati

Strati is an electric car developed by Local Motors and manufactured in collaboration with Cincinnati Incorporated and Oak Ridge National Laboratory. [2] It is the world's first electric car to heavily utilize 3D printing during the production process. [3] The car was manufactured using a Large Scale 3D Printer developed by ORNL and Cincinnati Inc. The car took just 44 hours to print during the 2014 International Manufacturing Technology Show in Chicago, Illinois. The printing was followed by three days of milling and assembling, with the completed car first test-driven on September 13, 2014. Strati is claimed to be the world's first 3D-Printed electric car. [1] [4]

Contents

Design

In April 2014, Local Motors organized the 3D Printed Car Design Challenge crowdsourcing to assist in the production of a full-body 3D-printed car. Seven finalists were selected from more than 200 submissions. In June 2014, Local Motors announced that the challenge was won by Michele Anoé of Italy, who was awarded the $5,000 prize. [5] After the contest, Local Motors took the design and made several modifications so that the car could be manufactured through 3D-Printing.

Specifications

The two-seat Strati is considered to be a "neighborhood" electric car. Depending on the configuration of the battery packs, the range of the car can be 100 to 120 mi (160 to 190 km) with top speeds of 40 mph (64 km/h). The car is not designed to be used on highways, as it does not meet the required safety test requirements. Production is planned by the end of 2015, with prices between $18,000 and $30,000. [6]

Manufacturing

Details of the printed body of a Strati Strati printing details.jpg
Details of the printed body of a Strati

Following the design competition, Local Motors handed off the design to the engineers at ORNL who perfected the process of Large Scale 3D Printing such that the Local Motors design could actually be manufactured. ORNL worked with Cincinnati Incorporated to develop the printer that would allow for the printing of the entire car. With the printer, ORNL and Cincinnati Inc. manufactured all body parts of the car and allowed for easy mounting of the mechanical parts, such as the electric motors and batteries.

Strati is printed from thermoplastic using a big area additive manufacturing (BAAM) [8] machine (a large FDM 3D-printer). This material is fully recyclable, which can be chopped and reprocessed to be used in printing another car. After the car is printed, the mechanical and electrical parts such as battery, motors, and suspension are manually assembled. [6]

The printing process has been improved by ORNL since July 2014, bringing the printing time of 140 hours down to less than 45 hours in September. Since IMTS, ORNL has brought the printing time of the Strati to less than 24 hours and is continuing their research efforts with the hope of printing the car in less than 10 hours.

The world's first title

Disputes exist over the title of the world's first 3D-printed car. In 2010, a hybrid car "Urbee" [9] was 3D-printed using an additive manufacturing process for the entire body. [10] Local Motors claimed that Urbee's manufacturer only 3D-printed the panels and other exterior parts, but used standard parts for the internal structure. For Strati, the company claimed that 3D printing was used for all except the parts that are "mechanically involved". Strati claims to be the world's first 3D-printed electric car. [1] [3]

Related Research Articles

<span class="mw-page-title-main">Hybrid vehicle</span> Vehicle using two or more power sources

A hybrid vehicle is one that uses two or more distinct types of power, such as submarines that use diesel when surfaced and batteries when submerged. Other means to store energy include pressurized fluid in hydraulic hybrids.

<span class="mw-page-title-main">3D printing</span> Additive process used to make a three-dimensional object

3D printing or additive manufacturing is the construction of a three-dimensional object from a CAD model or a digital 3D model. It can be done in a variety of processes in which material is deposited, joined or solidified under computer control, with material being added together, typically layer by layer.

<span class="mw-page-title-main">RepRap</span> Self-replicating 3D printer initiative

RepRap is a project to develop a low-cost 3D printer that can print most of its own components. As an open design, all of the designs produced by the project are released under a free software license, the GNU General Public License.

Electron-beam additive manufacturing, or electron-beam melting (EBM) is a type of additive manufacturing, or 3D printing, for metal parts. The raw material is placed under a vacuum and fused together from heating by an electron beam. This technique is distinct from selective laser sintering as the raw material fuses having completely melted.

<span class="mw-page-title-main">Lohner–Porsche</span> Motor vehicle

The Lohner–Porsche Mixed Hybrid was the first gasoline-electric hybrid vehicle.

<span class="mw-page-title-main">Solar car</span> Type of solar vehicle

A solar car is a solar vehicle for use on public roads or race tracks. Solar vehicles are electric vehicles that use self-contained solar cells to power themselves fully or partially from sunlight. Solar vehicles typically contain a rechargeable battery to help regulate and store the energy from the solar cells and from regenerative braking. Some solar cars can be plugged into external power sources to supplement the power of sunlight used to charge their battery.

<span class="mw-page-title-main">Stratasys</span>

Stratasys, Ltd. is an American-Israeli manufacturer of 3D printers, software, and materials for polymer additive manufacturing as well as 3D-printed parts on-demand. The company is incorporated in Israel. Engineers use Stratasys systems to model complex geometries in a wide range of polymer materials, including: ABS, polyphenylsulfone (PPSF), polycarbonate (PC) and polyetherimide and Nylon 12.

<span class="mw-page-title-main">Local Motors</span> American motor vehicle manufacturing company

Local Motors was an American motor vehicle manufacturing company focused on low-volume manufacturing of open-source motor vehicle designs using multiple microfactories. It was founded in 2007 by John B. Rogers Jr and had headquarters in Phoenix, Arizona. The company's lineup before its closure included the Rally Fighter and their 3D-printed Strati and Swim vehicles. The company developed vehicles using 3D Printing and utilized vehicle designs provided by the online community. In 2016, the company introduced an autonomous electric-powered shuttle named Olli.

TRI-D is a 3D printed metal rocket engine. Students from the Students for the Exploration and Development of Space at University of California, San Diego built the metal rocket engine using a technique previously confined to NASA, using a GPI Prototype and Manufacturing Services printer via the Direct metal laser sintering (DMLS) method. UCSD students were the first group in the world to 3D print a rocket engine of its size, other than NASA as of February 2014. The Tri-D engine cost US$6,800.

<span class="mw-page-title-main">Fused filament fabrication</span> 3D printing process

Fused filament fabrication (FFF), also known as fused deposition modeling, or filament freeform fabrication, is a 3D printing process that uses a continuous filament of a thermoplastic material. Filament is fed from a large spool through a moving, heated printer extruder head, and is deposited on the growing work. The print head is moved under computer control to define the printed shape. Usually the head moves in two dimensions to deposit one horizontal plane, or layer, at a time; the work or the print head is then moved vertically by a small amount to begin a new layer. The speed of the extruder head may also be controlled to stop and start deposition and form an interrupted plane without stringing or dribbling between sections. "Fused filament fabrication" was coined by the members of the RepRap project to give an acronym (FFF) that would be legally unconstrained in its use.

<span class="mw-page-title-main">Made In Space</span> Engineering company

Made In Space, Inc. (MIS) is an American company specializing in the engineering and manufacturing of three-dimensional printers for use in microgravity. Headquartered in Jacksonville, Florida, Made In Space's 3D printer was the first manufacturing device used in space.

<span class="mw-page-title-main">Prusa i3</span> 3D printer product line and related designs

The Prusa i3 is a family of fused deposition modeling 3D printers, manufactured by Czech company Prusa Research under the trademarked name Original Prusa i3. Part of the RepRap project, Prusa i3 printers were called the most used 3D printer in the world in 2016. The first Prusa i3 was designed by Josef Průša in 2012, and was released as a commercial kit product in 2015. The latest model is available in both kit and factory assembled versions. The Prusa i3's comparable low cost and ease of construction and modification made it popular in education and with hobbyists and professionals, with the Prusa i3 model MK2 printer receiving several awards in 2016.

<span class="mw-page-title-main">Applications of 3D printing</span>

In recent years, 3D printing has developed significantly and can now perform crucial roles in many applications, with the most common applications being manufacturing, medicine, architecture, custom art and design, and can vary from fully functional to purely aesthetic applications.

<span class="mw-page-title-main">3D printing processes</span> List of 3D printing processes

A variety of processes, equipment, and materials are used in the production of a three-dimensional object via additive manufacturing. 3D printing is also known as additive manufacturing, because the numerous available 3D printing process tend to be additive in nature, with a few key differences in the technologies and the materials used in this process.

<span class="mw-page-title-main">Hangprinter</span> 3D printer

Hangprinter is an open-source fused deposition modeling delta 3D printer notable for its unique frameless design. It was created by Torbjørn Ludvigsen. The Hangprinter uses relatively low cost parts and can be constructed for around US$250. The printer is part of the RepRap project, meaning many of the parts of the printer are able to be produced on the printer itself. The design files for the printer are available on GitHub for download, modification and redistribution.

<span class="mw-page-title-main">Energica Ego</span> Type of all-electric sport motorcycle

The Energica Ego is an electrically propelled sport road motorcycle designed and marketed by Energica Motor Company. It is claimed by Energica to be the world's first street-legal electric Italian sport motorcycle. The prototype was finished in 2013 and the vehicle came into the market in 2015. The prototype made use of new technologies such as CNC and 3D-printing, including the dashboard and headlights which were 3D-printed.

<span class="mw-page-title-main">StreetScooter C16</span>

The StreetScooter C16 was an electric car shown in 2014 by the electric vehicle manufacturer StreetScooter.

Markforged is an American public additive manufacturing company that designs, develops, and manufactures The Digital Forge — an industrial platform of 3D printers, software and materials that enables manufacturers to print parts at the point-of-need. The company is headquartered in Waltham, Massachusetts, in the Greater Boston Area. Markforged was founded by Gregory Mark and the chief technology officer (CTO) David Benhaim in 2013. It produced the first 3D printers capable of printing continuous carbon fiber reinforcement and utilizes a cloud architecture.

<span class="mw-page-title-main">XEV Yoyo</span> Chinese electric quadricycle

The XEV Yoyo is a 3D printed electric city car manufactured by Italian-Hong Kong-based startup XEV.

References

  1. 1 2 3 Robarts, Stu (17 September 2014). ""World's first" 3D printed car created and driven by Local Motors". Gizmag. Retrieved 22 September 2014.
  2. ↑ Gastelu, Gary (3 July 2014). "Local Motors 3D-printed car could lead an American manufacturing revolution". Fox News. Archived from the original on 8 September 2014. Retrieved 22 September 2014.
  3. 1 2 Russon, Mary-Ann (16 September 2014). "The Strati: World's First 3D-Printed Electric Car Built in Just 44 Hours". IB Times. Retrieved 22 September 2014.
  4. ↑ Franklin, Dallas (15 September 2014). "Made in Chicago: World's First 3D Printed Electric Car". KFOR-TV. Retrieved 22 September 2014.
  5. ↑ Jeffrey, Colin (9 June 2014). "Strati wins 3D printed car challenge". Gizmag. Retrieved 22 September 2014.
  6. 1 2 Pyper, Julia (12 September 2014). "World's First Three-Dimensional Printed Car Made in Chicago". Scientific American. Retrieved 22 September 2014.
  7. ↑ France, Anna Kaziunas (20 September 2014). "First Fused-Filament, Fully-Electric Vehicle". Makezine. Retrieved 22 September 2014.
  8. ↑ BAAM.
  9. ↑ Urbee.
  10. ↑ Quick, Darren (2 November 2010). "The Urbee hybrid: the world's first 3D printed car". Gizmag. Retrieved 22 September 2014.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.