Ten Standard Firefighting Orders

Last updated

The Ten Standard Firefighting Orders are a set of systematically organized rules designed by a USDA Forest Service task force to reduce danger to personnel and increase fire fighting efficiency. [1] [2] They were introduced in 1957 and since then only the numbering changed, in order to make them easier to memorize. [3]

Contents

The rules were based upon the success of the United States Armed Forces' General Orders for Sentries, a set of guidelines designed for safety and efficiency for military personnel standing sentry duty. The Ten Standard Orders were later supplemented by 18 Situations That Shout Watch Out, or the 18 Watchout Situations. [1] While the original orders were designed to be implemented in an order of importance, the order was changed in the 1980s to remove this priority of orders and create an easy to remember list with each order beginning with an initial of "Fire Orders", then returned to the original order in 2002. [2] A primary consideration for firefighters addressed by these orders is to be able to gain timely warning of a danger allowing the firefighter to safely escape. [4]

The orders were developed from lessons learned in a number of major wildland fires that led to the deaths of trapped firefighters including the Shoshone National Forest Blackwater fire of 1937 and the Helena National Forest Mann Gulch Fire in 1949. The order can be a basis for evaluating the aftermath of a firefighting situation, although some firefighters have criticized the orders as being difficult to follow. [2] [5]

Standard Firefighting Orders

  1. Keep informed on fire weather conditions and forecasts.
  2. Know what your fire is doing at all times.
  3. Base all actions on current and expected behavior of the fire.
  4. Identify escape routes and safety zones and make them known.
  5. Post lookouts when there is possible danger.
  6. Be alert. Keep calm. Think clearly. Act decisively.
  7. Maintain prompt communications with your forces, your supervisor, and adjoining forces.
  8. Give clear instructions and ensure they are understood.
  9. Maintain control of your forces at all times.
  10. Fight fire aggressively, having provided for safety first.

Related Research Articles

<span class="mw-page-title-main">Firefighter</span> Rescuer trained to extinguish fires

A firefighter is a first responder trained in firefighting, primarily to control and extinguish fires that threaten life and property, as well as to rescue persons from confinement or dangerous situations. Male firefighters are sometimes referred to as firemen.

<span class="mw-page-title-main">Fire engine</span> Emergency vehicle intended to put out fires

A fire engine is a road vehicle that functions as a firefighting apparatus. The primary purposes of a fire engine include transporting firefighters and water to an incident as well as carrying equipment for firefighting operations. Some fire engines have specialized functions, such as wildfire suppression and aircraft rescue and firefighting, and may also carry equipment for technical rescue.

<span class="mw-page-title-main">Smokejumper</span> Skydiving wildland firefighters

Smokejumpers are specially trained wildland firefighters who provide an initial attack response on remote wildland fires. They are inserted at the site of the fire by parachute.

<span class="mw-page-title-main">Aerial firefighting</span> Use of aircraft to combat wildfires

Aerial firefighting also known as Waterbombing is the use of aircraft and other aerial resources to combat wildfires. The types of aircraft used include fixed-wing aircraft and helicopters. Smokejumpers and rappellers are also classified as aerial firefighters, delivered to the fire by parachute from a variety of fixed-wing aircraft, or rappelling from helicopters. Chemicals used to fight fires may include water, water enhancers such as foams and gels, and specially formulated fire retardants such as Phos-Chek.

Firefighting jargon includes a diverse lexicon of both common and idiosyncratic terms. One problem that exists in trying to create a list such as this is that much of the terminology used by a particular department is specifically defined in their particular standing operating procedures, such that two departments may have completely different terms for the same thing. For example, depending on whom one asks, a safety team may be referred to as a standby, a RIT or RIG or RIC, or a FAST. Furthermore, a department may change a definition within its SOP, such that one year it may be RIT, and the next RIG or RIC.

This glossary of wildfire terms is a list of definitions of terms and concepts relevant to wildfires and wildland firefighting. Except where noted, terms have largely been sourced from a 1998 Fireline Handbook transcribed for a Conflict 21 counter-terrorism studies website by the Air National Guard.

<span class="mw-page-title-main">Hotshot crew</span> Elite force of 20-22 wildland firefighters

In the United States, a Shot Crew, officially known as an Interagency Hotshot Crew (IHC), is a team of 20-22 elite operators which mainly responds to large, high-priority fires across the country and abroad. They are assigned to work the most challenging parts of the fire and are considered strategic and tactical experts. Hotshots are a National Resource and their deployment is tightly controlled at the National Level. Hotshot crews are one of the most highly trained, skilled and experienced type of wild land firefighters. They are qualified to provide leadership for initial-attack and extended-attack on wildland fires. Hotshots are trained and equipped to work in remote areas for extended periods of time with minimal logistical support. They are organized by agencies such as the United States Forest Service, National Park Service, Bureau of Indian Affairs, Bureau of Land Management, and state/county agencies; the National Interagency Fire Center coordinates hotshot crews on the federal level.

<span class="mw-page-title-main">Wildfire suppression</span> Firefighting tactics used to suppress wildfires

Wildfire suppression is a range of firefighting tactics used to suppress wildfires. Firefighting efforts in wild land areas require different techniques, equipment, and training from the more familiar structure fire fighting found in populated areas. Working in conjunction with specially designed aerial firefighting aircraft, these wildfire-trained crews suppress flames, construct fire lines, and extinguish flames and areas of heat to protect resources and natural wilderness. Wildfire suppression also addresses the issues of the wildland–urban interface, where populated areas border with wild land areas.

<span class="mw-page-title-main">Wildland fire engine</span> Fire engine designed for fighting wildfires

A wildland fire engine or brush truck is a fire engine specifically designed to assist in fighting wildfires by transporting firefighters to the scene and providing them with access to the fire, along with water or other equipment. There are multiple types of wildfire apparatus which are used in different scenarios. According to the U.S. National Fire Protection Association, if the apparatus will be used primarily for outdoor and wildland responses, then it is to be considered a wildland fire apparatus and must conform to NFPA 1906.

<span class="mw-page-title-main">Fire flapper</span> Type of fire extinguisher

A flapper is a wildland firefighting tool that resembles a broom or a leaf rake with wide, overlapping metal bristles in the form of a hand fan. It is also called a swatter or a beater. It is designed for extinguishing minor fires in rural areas such as heaths. A flapper is built with a long handle and a series of lamellae which allows firefighters to stand well back from the fire. The lamellae are constructed in either rubber or steel, though practically any other fire-resistant material could be used.

As firefighting has a rich history throughout the world, traditions in this profession vary widely from country to country.

<span class="mw-page-title-main">Rattlesnake Fire</span> 1953 California, USA wildfire

The Rattlesnake Fire was a wildfire started by an arsonist on July 9, 1953, in Grindstone Canyon on the Mendocino National Forest in northern California. The wildfire killed one Forest Service employee and 14 volunteer firefighters from the New Tribes Mission, and burned over 1,300 acres (530 ha) before it was controlled on July 11, 1953. It became and remains to this day a well-known firefighting textbook case on fatal wildland fires.

<span class="mw-page-title-main">Helitack</span> Helicopter used to transport firefighters to fire zones

Helitack crews are teams of wildland firefighters who are transported by helicopter to wildfires. Helicopters provide rapid transport, enabling helitack crews to quickly respond and assess a wildfire situation. Helitack crews may land near a wildfire or, if equipped and trained, rappel from a hovering helicopter. Once on the ground, crews build firelines using hand tools, chainsaws, and other firefighting tools. They often remain overnight in remote locations. After they have completed their assignment, crew members may pack up to 120 pounds of equipment over difficult terrain to reach a pick-up point. Rappellers often prepare helispots that provide better access to a fire. Helicopter crew members may also perform other duties such as tree falling, firing operations, and managing helibases.

Firefighting is the act of extinguishing destructive fires. A firefighter fights these fires with the intent to prevent destruction of life, property and the environment. Firefighting is a highly technical profession, which requires years of training and education in order to become proficient. A fire can rapidly spread and endanger many lives; however, with modern firefighting techniques, catastrophe can usually be avoided. To help prevent fires from starting, a firefighter's duties include public education and conducting fire inspections. Because firefighters are often the first responders to victims in critical conditions, firefighters often also provide basic life support as emergency medical technicians or advanced life support as licensed paramedics. Firefighters make up one of the major emergency services, along with the emergency medical service, the police, and many others.

<span class="mw-page-title-main">Wildland fire module</span>

A Wildland fire module (WFM), formerly fire use module (FUM), is a 7–10 person team of firefighting personnel dedicated to planning, monitoring and starting fires. They may be deployed anywhere in the United States for resource benefits, prescribed fire and hazard fuel reduction projects.

Wildfire suppression equipment and personnel is part of the science of fire fighting focusing on the use of specialized equipment, training and tactics to effectively control, surround and eventually extinguish a natural cover fire. There are several specially designed tools that through their function and user training, perform specialized tasks that are specific to natural cover firefighting. This is used together in conjunction with the general understanding of the behavior of fire to form a viable plan of attack.

<span class="mw-page-title-main">Firefighting in the United States</span> Firefighting

Firefighting in the United States dates back to the earliest European colonies in the Americas. Early firefighters were simply community members who would respond to neighborhood fires with buckets. The first dedicated volunteer fire brigade was established in 1736 in Philadelphia. These volunteer companies were often paid by insurance companies in return for protecting their clients.

<span class="mw-page-title-main">Fire-adapted communities</span>

A fire-adapted community is defined by the United States Forest Service as "a knowledgeable and engaged community in which the awareness and actions of residents regarding infrastructure, buildings, landscaping, and the surrounding ecosystem lessens the need for extensive protection actions and enables the community to safely accept fire as a part of the surrounding landscape."

<span class="mw-page-title-main">Thirtymile Fire</span> 2001 fire in the Okanogan National Forest, Washington state

The Thirtymile Fire was first reported on July 9, 2001 in the Okanogan National Forest, approximately 30 miles (48 km) north of Winthrop, Washington, United States. The wildfire had been caused by an unattended campfire that spread rapidly in the hot and dry weather in the Pacific Northwest. Four firefighters were killed when the fire cut off their only escape route out of the narrow canyon.

<span class="mw-page-title-main">Blackwater Fire of 1937</span> Fire in Shoshone National Forest

On August 18, 1937, a lightning strike started the Blackwater Fire in Shoshone National Forest, approximately 35 miles (56 km) west of Cody, Wyoming, United States. Fifteen firefighters were killed by the forest fire when a dry weather front caused the winds to suddenly increase and change direction. The fire quickly spread into dense forest, creating spot fires that trapped some of the firefighters in a firestorm. Nine firefighters died during the fire and six more died shortly thereafter from severe burns and respiratory complications. Another 38 firefighters were injured. The fire killed more professional wildland firefighters in the U.S. than any other in the 103 years between the Great Fire of 1910 and the Yarnell Hill Fire in 2013.

References

  1. 1 2 "Standard Firefighting Orders and 18 Watchout Situations". Risk Management. USDA Forest Service. Retrieved 2 July 2013.
  2. 1 2 3 Weick, Karl E.; Kathleen M. Sutcliffe (2011). Managing the Unexpected: Resilient Performance in an Age of Uncertainty (2nd ed.). Wiley. p. 141. ISBN   9780470534236.
  3. Foresty.ok.gov: 10 Standard Orders
  4. "on Wildland Firefighter Safety | Standard Orders and Watch Outs". California Professional Firefighters Associati. 2007. Retrieved 2 July 2013.
  5. Wilkens, John (25 November 2006). "Deadly 1956 chaos led to 'firefighting orders' Rules held sacred, but effectiveness under fire". The San Diego Union-Tribune. Retrieved 2 July 2013.