Terminal sliding mode

Last updated April 22, 2024

In the early 1990s, a new type of sliding mode control, named terminal sliding modes (TSM) was invented at the Jet Propulsion Laboratory (JPL) by Venkataraman and Gulati.^[1] TSM is robust non-linear control approach.

The main idea of terminal sliding mode control evolved out of seminal work on terminal attractors done by Zak in the JPL, and is evoked by the concept of terminal attractors which guarantee finite time convergence of the states. While, in normal sliding mode, asymptotic stability is promised which leads to the convergence of the states to the origin. But this convergence may only be guaranteed within infinite time. In TSM, a nonlinear ^{[ disambiguation needed ]} term is introduced in the sliding surface design so that the manifold is formulated as an attractor. After the sliding surface is intercepted, the trajectory is attracted within the manifold and converges to the origin following a power rule.

There are some variations of the TSM including: Non-singular TSM,^[2] Fast TSM,^[3]

Terminal sliding mode also has been widely applied to nonlinear process control, for example, rigid robot control etc.. Several open questions still remain on the mathematical treatment of the system's behavior at the origin since it is non-Lipschitz.

Control Scheme

Consider a continuous nonlinear system in canonical form

${\overset {\cdot }{x}}_{1}(t)=x_{2}(t)$ ......

${\overset {\cdot }{x}}_{n-1}(t)=x_{n}(t)$

${\overset {\cdot }{x}}_{n}(t)=a(x)+b(x)u(t)$

where $x(t)\in R^{n}$ is the state vector, $u\in R$ is the control input, $a(x)$ and $b(x)$ are nonlinear functions in $x(t)$ . Then a sequence of terminal sliding surfaces can be designed as follows:

$s_{1}(t)={\overset {\cdot }{s}}_{0}(t)+\alpha _{1}(t)s_{0}^{\gamma _{1}}(t)$

$s_{2}(t)={\overset {\cdot }{s}}_{1}(t)+\alpha _{2}(t)s_{1}^{\gamma _{2}}(t)$ ......

$s_{n-1}(t)={\overset {\cdot }{s}}_{n-2}(t)+\alpha _{n-1}(t)s_{n-2}^{\gamma _{n-1}}(t)$ where $s_{0}(t)=x_{1}(t)$ and $\gamma _{i}={\frac {p_{i}}{q_{i}}},i=1,2,...,n-1$ . $p_{i},q_{i}$ are positive odd numbers and $p_{i}\leq q_{i}$ .

Related Research Articles

In mathematical physics and mathematics, the Pauli matrices are a set of three $2 \times 2$ complex matrices that are Hermitian, involutory and unitary. Usually indicated by the Greek letter sigma, they are occasionally denoted by tau when used in connection with isospin symmetries.

In computer science, an LL parser is a top-down parser for a restricted context-free language. It parses the input from Left to right, performing Leftmost derivation of the sentence.

<span class="mw-page-title-main">Euler's constant</span> Constant value used in mathematics

Euler's constant is a mathematical constant, usually denoted by the lowercase Greek letter gamma, defined as the limiting difference between the harmonic series and the natural logarithm, denoted here by $log$ :

In transcendental number theory, the Lindemann–Weierstrass theorem is a result that is very useful in establishing the transcendence of numbers. It states the following:

In mathematics, a generalized hypergeometric series is a power series in which the ratio of successive coefficients indexed by n is a rational function of n. The series, if convergent, defines a generalized hypergeometric function, which may then be defined over a wider domain of the argument by analytic continuation. The generalized hypergeometric series is sometimes just called the hypergeometric series, though this term also sometimes just refers to the Gaussian hypergeometric series. Generalized hypergeometric functions include the (Gaussian) hypergeometric function and the confluent hypergeometric function as special cases, which in turn have many particular special functions as special cases, such as elementary functions, Bessel functions, and the classical orthogonal polynomials.

In mathematics, the upper and lower incomplete gamma functions are types of special functions which arise as solutions to various mathematical problems such as certain integrals.

<span class="mw-page-title-main">Dirichlet distribution</span> Probability distribution

In probability and statistics, the Dirichlet distribution (after Peter Gustav Lejeune Dirichlet), often denoted $, is a family of continuous multivariate probability distributions parameterized by a vector of positive reals. It is a multivariate generalization of the beta distribution, hence its alternative name of multivariate beta distribution (MBD) . Dirichlet distributions are commonly used as prior distributions in Bayesian statistics, and in fact, the Dirichlet distribution is the conjugate prior of the categorical distribution and multinomial distribution.$

In control theory, a state observer or state estimator is a system that provides an estimate of the internal state of a given real system, from measurements of the input and output of the real system. It is typically computer-implemented, and provides the basis of many practical applications.

In the field of mathematics, norms are defined for elements within a vector space. Specifically, when the vector space comprises matrices, such norms are referred to as matrix norms. Matrix norms differ from vector norms in that they must also interact with matrix multiplication.

In probability theory and statistics, the beta prime distribution is an absolutely continuous probability distribution. If $has a beta distribution, then the odds has a beta prime distribution.$

The gradient theorem, also known as the fundamental theorem of calculus for line integrals, says that a line integral through a gradient field can be evaluated by evaluating the original scalar field at the endpoints of the curve. The theorem is a generalization of the second fundamental theorem of calculus to any curve in a plane or space rather than just the real line.

Subgradient methods are convex optimization methods which use subderivatives. Originally developed by Naum Z. Shor and others in the 1960s and 1970s, subgradient methods are convergent when applied even to a non-differentiable objective function. When the objective function is differentiable, sub-gradient methods for unconstrained problems use the same search direction as the method of steepest descent.

An $- superprocess,, within mathematics probability theory is a stochastic process on that is usually constructed as a special limit of near-critical branching diffusions.$

The uncertainty theory invented by Baoding Liu is a branch of mathematics based on normality, monotonicity, self-duality, countable subadditivity, and product measure axioms.

In mathematical physics, higher-dimensional gamma matrices generalize to arbitrary dimension the four-dimensional Gamma matrices of Dirac, which are a mainstay of relativistic quantum mechanics. They are utilized in relativistically invariant wave equations for fermions in arbitrary space-time dimensions, notably in string theory and supergravity. The Weyl–Brauer matrices provide an explicit construction of higher-dimensional gamma matrices for Weyl spinors. Gamma matrices also appear in generic settings in Riemannian geometry, particularly when a spin structure can be defined.

In mathematics, Ricci calculus constitutes the rules of index notation and manipulation for tensors and tensor fields on a differentiable manifold, with or without a metric tensor or connection. It is also the modern name for what used to be called the absolute differential calculus, developed by Gregorio Ricci-Curbastro in 1887–1896, and subsequently popularized in a paper written with his pupil Tullio Levi-Civita in 1900. Jan Arnoldus Schouten developed the modern notation and formalism for this mathematical framework, and made contributions to the theory, during its applications to general relativity and differential geometry in the early twentieth century.

Input-to-state stability (ISS) is a stability notion widely used to study stability of nonlinear control systems with external inputs. Roughly speaking, a control system is ISS if it is globally asymptotically stable in the absence of external inputs and if its trajectories are bounded by a function of the size of the input for all sufficiently large times. The importance of ISS is due to the fact that the concept has bridged the gap between input–output and state-space methods, widely used within the control systems community.

In computer science, a suffix automaton is an efficient data structure for representing the substring index of a given string which allows the storage, processing, and retrieval of compressed information about all its substrings. The suffix automaton of a string $is the smallest directed acyclic graph with a dedicated initial vertex and a set of "final" vertices, such that paths from the initial vertex to final vertices represent the suffixes of the string.$

In algebraic topology, the path space fibration over a based space $is a fibration of the form$

Pentagramma mirificum is a star polygon on a sphere, composed of five great circle arcs, all of whose internal angles are right angles. This shape was described by John Napier in his 1614 book Mirifici Logarithmorum Canonis Descriptio along with rules that link the values of trigonometric functions of five parts of a right spherical triangle. The properties of pentagramma mirificum were studied, among others, by Carl Friedrich Gauss.

References

↑ Venkataraman, S. T.; Gulati, S. (June 1992). "Control of Nonlinear Systems Using Terminal Sliding Modes". 1992 American Control Conference. pp. 891–893. doi:10.23919/ACC.1992.4792209. ISBN 0-7803-0210-9. S2CID 28613314.
↑ Feng, Yong; Yu, Xinghuo; Man, Zhihong (2002-12-01). "Non-singular terminal sliding mode control of rigid manipulators". Automatica. 38 (12): 2159–2167. doi:10.1016/S0005-1098(02)00147-4. ISSN 0005-1098.
↑ Yu, Xinghuo; Zhihong, Man (February 2002). "Fast terminal sliding-mode control design for nonlinear dynamical systems". IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications . 49 (2): 261–264. doi:10.1109/81.983876. hdl: 1959.3/81066 . ISSN 1057-7122. S2CID 7228942.

Venkataraman, S., Gulati, S., Control of Nonlinear Systems Using Terminal Sliding Modes J. Dyn. Sys., Meas., Control, Sept 1993, Volume 115, Issue 3.

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[1] Venkataraman, S. T.; Gulati, S. (June 1992). "Control of Nonlinear Systems Using Terminal Sliding Modes". 1992 American Control Conference. pp. 891–893. doi:10.23919/ACC.1992.4792209. ISBN 0-7803-0210-9. S2CID 28613314.

[2] Feng, Yong; Yu, Xinghuo; Man, Zhihong (2002-12-01). "Non-singular terminal sliding mode control of rigid manipulators". Automatica. 38 (12): 2159–2167. doi:10.1016/S0005-1098(02)00147-4. ISSN 0005-1098.

[3] Yu, Xinghuo; Zhihong, Man (February 2002). "Fast terminal sliding-mode control design for nonlinear dynamical systems". IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications . 49 (2): 261–264. doi:10.1109/81.983876. hdl: 1959.3/81066 . ISSN 1057-7122. S2CID 7228942.

[1]

[2]

[3]