Thomas Powell was considered one of the fastest, if not the fastest, of the Hudson River steamers of her time, capable of speeds in excess of 22 miles per hour (35km/h). Her speed, excellent accommodations and good management made her a favorite with the traveling public, and consequently, she retained her original name to the end of her career. Her last known trip was made in 1879 and she was scrapped in 1881.
Construction and design
In 1846, Thomas Powell, a prominent businessman of Newburgh, New York, and his son-in-law Homer Ramsdell, ordered a new steamboat to replace Powell's Highlander, which had been running on the New York–to–Newburgh route since 1836.[1][2] The new steamboat was named Thomas Powell after her part-owner.[1]
Thomas Powell, a wooden-hulled sidewheel steamer, was built by Lawrence & Sneden of Manhattan, New York,[3][2][4] under the supervision of her future captain, Samuel Johnson.[4] She was 231feet 2inches (70.46m) long, with a beam of 28feet 11inches (8.81m), draft of 5feet 6inches (1.68m) and hold depth of 9 feet (2.7m)[3][5] Her registered tonnage was 585.[3] A bust of her namesake was mounted on the pilot house roof.[6]
Thomas Powell was powered by a single-cylindervertical beam engine with bore of 48 inches (120cm), stroke of 11 feet (3.4m),[3][5] and steam cut-off set at 8 feet (2.4m).[5] Steam was supplied by two boilers, one on each guard in accordance with the prevailing fashion, at a working pressure of 50psi (340kPa), and fuel consumption was two tons of anthracite coal per hour.[5] Both the engine and boilers were built by T. F. Secor & Co. of New York. The water wheels had a diameter of 29feet 6inches (8.99m)[3][5] and a paddle length of 9 feet (2.7m).[5]
Service history
Newburgh service 1846–1848
1846 oil painting of Thomas Powell by James Bard. Compare the solid paddle box es in this image with the latticed design (see photo above) later adopted.
Thomas Powell made her maiden voyage from New York to Newburgh on 30 April 1846.[7] She thereafter maintained a regular schedule, departing from Warren Street, New York, for Newburgh at 4 pm Monday through Saturday, with intermediate stops at Van Courtland's Dock, Peekskill, West Point, Cold Spring and Cornwall.[8] Return trips from Newburgh departed at 6:30 am Monday and 7 am Tuesday through Saturday.[8] The steamer did not operate on Sundays.[8]
Thomas Powell's excellent passenger accommodations, exceptional speed and good management quickly made her a favorite with the traveling public.[4][5] On 18 June, she went from New York to Cauldwell's—a 43-mile (69km) distance—in just 2 hours, reaching Newburgh 40 minutes later, the average speed over the total distance being 22.5 miles per hour (36.2km/h).[6] On 16 August, the steamer went from New York to Newburgh, a distance of 60 miles (97km)—including five intermediate stops totalling 20 minutes—in 3 hours 6 minutes,[lower-alpha 1] at an average speed of just under 22 miles per hour (35km/h), reinforcing her reputation as one of the fastest boats on the Hudson.[5]
The steamboat Niagara
One boat considered a possible rival to Thomas Powell in terms of speed at this time was Mountaineer,[9] a steamer of about the same size and tonnage that had entered service the same year. In July, Mountaineer had easily beaten Thomas Powell's predecessor Highlander, and opinion was divided as to which of the two newer boats was faster.[9] On 13 August, Mountaineer departed Hammond Street, New York, some minutes earlier than usual, and thus came within sight of Thomas Powell as the two boats made their way to Peekskill.[10] Approaching Yonkers, Mountaineer was about two miles behind Thomas Powell, but reportedly put on "a great head of steam"[10] and appeared to be catching her rival when a loud explosion occurred and she was enveloped in a cloud of steam.[10]Thomas Powell's captain immediately put his vessel about to go to the aid of the stricken steamer, which had blown a sheet from her steam chimney.[11][12] Several passengers and crew who were scalded in the accident were taken aboard Thomas Powell, along with the other passengers, for the completion of their passages.[10][11][12]
Thomas Powell continued to operate between New York and Newburgh in the 1847 season, her owners renting a berth at Warren Street for the sum of $2,000 annually.[13] On June 8, the steamer reportedly completed the journey from New York to Newburgh in 3 hours flat, with a total running time of 2 hours 35 minutes, at an average of 23.26 miles per hour (37.43km/h)—a speed said by a contemporaneous journal to be obtainable by "few boats, and very few railroads" in the country at the time.[14]
The following month, the steamboat Niagara was on her way from New York to Albany when a steam component gave way about 25 miles (40km) north of the city, causing an explosion that reportedly killed two of the boat's engineers and scalded several passengers.[15][16] The steamboats Roger Williams and Thomas Powell were quickly on the scene, the former taking most of the passengers aboard, including some with milder injuries, for completion of their journey to Albany.[15][16]Thomas Powell in the meantime towed the stricken Niagara to shore, before taking two more seriously injured passengers aboard in order to return them to New York City for medical treatment.[15][16]
Piermont and Poughkeepsie service, 1849–1850
By early 1849, the New York and Erie Railroad had completed its line between Port Jervis and Piermont, New York,[1] creating a demand for a more frequent steamboat service between Piermont and New York City. Thomas Powell & Co., which had a financial interest in the railroad, consequently decided to sell Thomas Powell to the line to help meet this demand,[1][5] with the steamboat Roger Williams taking the Powell's place on the Newburgh route.[17]Thomas Powell was subsequently placed on a schedule of two round trips per day between the city and Piermont, leaving the former at 7 am and 4 pm daily.[18] The steamboat Erie (formerly Iron Witch) was also acquired by the railroad for the service.[1] Passenger baggage was placed in barges towed by the steamers.[1]
Thomas Powell continued in this service for two seasons.[1] By 1851, passenger travel on the river had declined due to the completion of the Hudson River Railroad to Albany,[19] and on May 12 of that year, the steamer was sold to Thomas Hulse, who placed her on a route between New York City and Poughkeepsie.[1][19] She remained in this service for only a few weeks however before being sold to the Newcastle and Frenchtown Turnpike & Railroad Company for service on the Delaware River.[1][19]
Philadelphia to Cape May service, 1851–1856
After acquiring Thomas Powell, the Newcastle and Frenchtown Turnpike & Railroad Company placed the steamer, along with the steamboat General McDonald, on the 105-mile (169km)[20] route between Philadelphia and Cape May, New Jersey, on the Delaware Bay,[1][19][20] in opposition to the old steamboats Ohio and Morris.[1][20] In addition to her regular trips on this route, Thomas Powell was also employed occasionally during this period as an excursion steamer.[21]
The steamer continued in this service until September 1855, when she was sold to parties in New York.[1]
Saugerties, Poughkeepsie, Rondout and Catskill service, 1856–1863
Mary Powell (pictured), Thomas Powell's replacement on the Rondout route, retained the Powell name to capitalize on the high reputation of her predecessor
By late 1855, Thomas Powell had come into the possession of Oscar Hoyt of New York,[3][7] who returned her to service on the Hudson River, running between New York City and Albany. Though the steamer would remain in Hudson River service for the rest of her commercial career, she only briefly continued on the Albany route before being purchased in the winter of 1855 by Captain Absalom L. Anderson.[22]
Captain A. L. Anderson
Anderson originally used Thomas Powell to replace the aging steamer Robert L. Stevens, which he had been running on a route between New York City and his hometown of Saugerties. After only one season, however, he realized that the Powell was too large for the service, and in 1857 he switched her destination to Poughkeepsie.[1][7]Thomas Powell remained on the Poughkeepsie route until 1858, when the citizens of Rondout, who had been deprived of a steamboat service since the withdrawal of the Alida in 1855, persuaded Anderson to extend his steamboat service the additional 16 miles (26km) to their city.[7] The initial run by the steamer to Rondout was made from Jay Street, New York, at 3:53 pm on April 24, 1858.[7]Thomas Powell's regularly scheduled service began two days later on the 26th, the vessel departing Rondout at 5:30 am Monday through Saturday, arriving at Jay Street at 11 am after the 90-mile (140km) run, and leaving again for Rondout at 3:45 pm.[23][lower-alpha 2] The route thus established would be maintained, largely by Anderson and his sons, for the next sixty years (albeit with several different vessels).[24]
In 1860, the new steamboat Daniel Drew appeared on the river, and Anderson realized that Thomas Powell, previously among the fastest and best-appointed steamboats afloat, was on the verge of being outclassed by a new generation of vessels.[24] He decided to order a new steamboat to replace the Powell, but was unable to do so for another year due to other financial commitments, and his new steamboat, Mary Powell—retaining the Powell name to capitalize on the high reputation of her predecessor—was not launched until August 1861.[24]
Mary Powell's contract stipulated that she was to be faster by "one mile in twelve" than Thomas Powell[24] or the builder was reportedly to forfeit $5,000—considered a bad bet by pundits given the latter's reputation for speed.[25] Although she was not quite completed, Anderson attempted to rush Mary Powell into service, and she made her first voyage to Rondout on 12 October,[26] but shortly after was replaced by her predecessor and would not run again until the following year.[27]Mary Powell's initial speed reached only 21.6 miles per hour (34.8km/h), seeming to prove the skeptics correct,[27] but the following year she was declared by her owner to be a faster boat on the Rondout run by an average of 30 minutes.[28]
Following the end of the 1861 season, Thomas Powell was sold to the Catskill Steam Transportation Company[1][27] for the sum of $35,000 [27] (equivalent to $1,139,963in 2022) and in 1862, made her debut on the New York City to Catskill route.[1] She would continue on this route until 1864.[1]
American Civil War service, 1864
On April 12, 1864, Thomas Powell was chartered at the rate of $300 (equivalent to $5,613in 2022) per day by the United States Quartermaster Department for service in the American Civil War.[1] She subsequently served as Major-General Benjamin Butler's dispatch boat,[29] and participated in the Bermuda Hundred campaign.[30] The steamer's charter expired on June 9, 1864.[1]
Catskill and Troy service, 1864–1877
After the expiration of her USQMD charter, Thomas Powell returned to service with the Catskill Steam Transportation Company and resumed operation on the Catskill route, which she continued until 1872.[31] That year, she was thoroughly overhauled and rebuilt, with her length increased by 29feet 9inches (9.07m) and staterooms added,[32] her registered tonnage thus increasing to 735.[3] On June 5, 1872, she was purchased by the newly-formed Citizens Steamboat Company and placed on the route between New York City and Troy, New York, as a nightboat, her stablemate in this service being the steamer Sunnyside.[32] In 1875, Sunnyside was sunk by ice and replaced by the steamer Twilight.[32]Thomas Powell and Twilight continued operating on the Troy route until June 15, 1877, when the new steamer Saratoga replaced Thomas Powell, which in turn was retained as a spare boat.[32] In 1878, Thomas Powell was occasionally employed by the company as an excursion steamer,[33] and in 1879, she briefly returned to the Rondout run to replace the steamboat Thomas Cornell, which was in the process of being rebuilt.[34]
Scrapping
After being laid up for about two years, Thomas Powell was scrapped in 1881 at Port Ewen, New York,[lower-alpha 3] "after thirty-five years of splendid service."[6] That she retained her original name to the end of her career was considered a tribute to her enduring high reputation;[36] it was also said of her that no steamboat "of her [cylinder] inches" ever matched her speed.[36] After her scrapping, her ship's bell was donated to the school board of Keyport, New Jersey, and used in the tower of the local high school.[35] Her engine clock was acquired by marine engineer and historian George W. Murdock.[35]
Footnotes
↑ [5] Heyl erroneously gives the time as 4 hours and 6 minutes.[1]
↑ Heyl erroneously states that the steamer's destination at this time was Newburgh rather than Rondout.[1]
↑ [6][19][35] Heyl erroneously states that the steamer was scrapped in 1887.[32]
Related Research Articles
A steamboat is a boat that is propelled primarily by steam power, typically driving propellers or paddlewheels. Steamboats sometimes use the prefix designation SS, S.S. or S/S or PS ; however, these designations are most often used for steamships.
The Ulster and Delaware Railroad (U&D) was a railroad located in the state of New York. It was often advertised as "The Only All-Rail Route to the Catskill Mountains." At its greatest extent, the U&D extended 107 miles (172 km) from Kingston Point on the Hudson River through the Catskill Mountains to its western terminus at Oneonta, passing through the counties of Ulster, Delaware, Schoharie and Otsego.
Kingston Point station, was one of the last stations built on the Ulster and Delaware Railroad (U&D). It was built in Kingston, New York, to permit passengers and cargo to be transferred between the U&D and boats transiting the Hudson River between Albany and New York. It was also adjacent to Kingston Point Park, which was an attraction in itself, and there was a nearby trolley depot.
Rhinecliff station is an Amtrak intercity rail station located in the Rhinecliff hamlet of Rhinebeck, New York, United States. The station has one low-level island platform, with a portable wheelchair lift for accessibility. It is served by the Adirondack, Berkshire Flyer, Empire Service, Ethan Allen Express, and Maple Leaf.
Rondout, is situated in Ulster County, New York on the Hudson River at the mouth of Rondout Creek. Originally a maritime village, the arrival of the Delaware and Hudson Canal helped create a city that dwarfed nearby Kingston. Rondout would become the third largest port on the Hudson River. Rondout merged with Kingston in 1872. It now includes the Rondout-West Strand Historic District.
The Puget Sound mosquito fleet was a multitude of private transportation companies running smaller passenger and freight boats on Puget Sound and nearby waterways and rivers. This large group of steamers and sternwheelers plied the waters of Puget Sound, stopping at every waterfront dock. The historical period defining the beginning and end of the mosquito fleet is ambiguous, but the peak of activity occurred between the First and Second World Wars.
The North River Steamboat or North River, colloquially known as the Clermont, is widely regarded as the world's first vessel to demonstrate the viability of using steam propulsion for commercial water transportation. Built in 1807, the North River Steamboat operated on the Hudson River – at that time often known as the North River – between New York City and Albany, New York. It was built by the wealthy investor and politician Robert Livingston and inventor and entrepreneur Robert Fulton (1765–1815).
Natchez has been the name of several steamboats, and four naval vessels, each named after the city of Natchez, Mississippi or the Natchez people. The current one has been in operation since 1975. The previous Natchez were all operated in the nineteenth century, most by Captain Thomas P. Leathers. Each of the steamboats since Leathers' first had as its ensign a cotton bale between its stacks.
Wilson G. Hunt was a steamboat that ran in the early days of steam navigation on Puget Sound and Sacramento, Fraser, and Columbia Rivers. She was generally known as the Hunt during her years of operation. She had a long career on the west coast of the United States and Canada, and played an important transportation role in the California Gold Rush; it also transported the Governor and the state legislature as the state capital of California moved from Benicia to Sacramento in 1854.
The Allaire Iron Works was a leading 19th-century American marine engineering company based in New York City. Founded in 1816 by engineer and philanthropist James P. Allaire, the Allaire Works was one of the world's first companies dedicated to the construction of marine steam engines, supplying the engines for more than 50% of all the early steamships built in the United States.
Alexander Hamilton was a steamer built for the Hudson River Day Line in 1924 and named after Founding Father Alexander Hamilton. It was added to the National Register of Historic Places on March 25, 1977. The remains of the vessel are located adjacent to the Naval Weapons Station Earle pier in Middletown Township, Monmouth County, New Jersey, United States.
Lawrence & Foulks was a 19th-century American shipbuilding company based in New York. Established in the early 1850s, the company built 144 vessels of all types over the course of some fifty years, but is best known for its production of high-speed wooden-hulled steamboats and steamships. Notable vessels built by the company include the record-breaking Hudson River steamboat Chauncey Vibbard, the luxury Long Island Sound steamer Commonwealth, and the fast oceangoing steamships—later U.S. Navy gunboats—Bienville and De Soto. In addition to the domestic market, the company also built ships for service as far afield as South America and China.
Commonwealth was a large sidewheel steamboat built in 1854–55 for passenger service on Long Island Sound. The most celebrated Sound steamer of her day, Commonwealth was especially noted for the elegance and comfort of her passenger accommodations, which included gas lighting, steam heating, and an "enchantingly beautiful" domed roof in her upper saloon. Her stability of motion led her captain to describe Commonwealth as the finest rough weather steamboat ever built in the United States.
Chauncey Vibbard, often abbreviated as C. Vibbard or just Vibbard, was a steamboat built in New York in 1864 for passenger service on the Hudson River. The first steamboat built specifically for what later became the Hudson River Day Line, Chauncey Vibbard quickly established herself as the fastest steamboat on the river, if not the world, with a record run from New York to Albany in 1864. Her popularity was such that after only two years of service she was lengthened to accommodate more passengers.
Isaac C. Smith was an American sail and steamboat captain, shipbuilder, sparmaker and entrepreneur.
New York was an American passenger-cargo sidewheel steamboat built in 1836 for service on Long Island Sound. When new, she was the largest steamboat yet to operate on the route between New York and New Haven, Connecticut, and was one of the largest Sound steamboats of her day.
Santa Claus was a sidewheel passenger-and-freight steamboat built in 1845 for service on the Hudson River between Wilbur, New York, and New York City. In her first few years of operation, Santa Claus saw service on a number of different Hudson River routes, most notably between Albany and New York City. She was also employed from time to time as an excursion steamer. A highlight of her career occurred in 1852, when she had the honor of conveying the remains of American statesman Henry Clay from New York City to Albany en route to their final resting place.
The West Street Foundry was an American steam engineering works notable for producing marine steam engines in the mid-19th century. Based in Brooklyn, New York, the company built at least 27 marine engines between 1845 and 1855, including engines for some of the fastest and finest steamboats of the era. The company also built and repaired steam engines and boilers of all types, as well as doing other metalwork. The company failed and was liquidated in 1855.
Daniel Webster was an American steamboat built in 1853 for passenger service on the coast of Maine. When new, she was the largest and fastest steamer in Maine coastal service, and widely considered to be the finest.
Dayton, Fred Erving (1925). Steamboat Days. New York: Frederick A. Stokes Company. pp.57, 298–299. OCLC1458123
Heyl, Erik (1965). Early American Steamers. Vol.IV. Buffalo, New York: Erik Heyl. pp.317–319. OCLC1626009
Morrison, John Harrison (1903). History of American Steam Navigation. New York: W. F. Sametz & Co., Inc. pp.158–160. OCLC3041572
Ringwald, Donald C. (October 1946). "The Hudson River Steamboat Thomas Cornell, 1863–1882". The American Neptune. Vol.6, no.4. Salem, MA: The American Neptune, Inc. p.284. OCLC1480480
Ringwald, Donald C. (July 1954). "Queen of the Hudson". The American Neptune. Vol.14, no.3. Salem, MA: American Neptune Inc. pp.163–166, 174. OCLC 1480480
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
