Touch probe

Last updated

Touch probes are tools used for precision measurements in CNC (Computer Numerical Control) machining processes. They work in a way similar to Coordinate-measuring devices. Probes are used to adjust different offsets when setting up a machining job. They can help make adjustments to tool lengths, diameter and length offsets as well as measuring various other workpiece dimensions. [1] Probing systems can significantly reduce the time required for tool changes and adjustments in work-holding setups, and can streamline manufacturing processes. [2]

Contents

Usage and Types

The capability for accurate and automatic measurements provided by touch probes is an important part of setting up unmanned operations in modern manufacturing environments. [3] Touch probes differ from a standalone coordinate-measuring machine in that they are typically used on the machine cutting materials. While commonly used in milling machines with automatic tool change systems, touch probes can also be manually swapped with cutting tools and are often paired with a CNC Milling Tool Height Setter for optimized performance. [2]

Types

Operation

In CNC machining, when something has been partially machined and needs more operations performed in a different position, it can be difficult to position the machine and restart operations in a needed location of the modified coordinates. For example, something needs to be flipped over to be machined on the opposite side. In this case, a probe can be put into the tool holder and programmed with G-code or other methods to touch off the work-piece, telling the machine where everything now is. After the machine knows everything's location, offsets are adjusted to start the next operation after the probe has been removed from the tool holder. [2] [4]

The technology reduces manual measurement errors and also improves machining accuracy, speeds up the setup process, and enables more sophisticated and precise manufacturing capabilities. [4] [6]

History

The development of precision probes dates back to the 1920s with different mechanical touch devices, but significant advancements came with the advent of Coordinate Measuring Machines (CMM) in the late 1950s. This led to the creation of contact and non-contact probes, including mechanical triggers and scanning probes, as well as laser and optical video probes. Mechanical probes, the earliest form of precision measurement tools, rely on direct contact for measuring and are now rarely used due to their lower precision. Trigger probes, popularized by Renishaw in the 1970s, utilize pulse signals to determine contact point coordinates, offering precise measurements. [7] [8]

Related Research Articles

<span class="mw-page-title-main">Potentiometer</span> Type of resistor, usually with three terminals

A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider. If only two terminals are used, one end and the wiper, it acts as a variable resistor or rheostat.

<span class="mw-page-title-main">Machinist</span> Technician

A machinist is a tradesperson or trained professional who operates machine tools, and has the ability to set up tools such as milling machines, grinders, lathes, and drilling machines.

<span class="mw-page-title-main">Numerical control</span> Computer control of machine tools

In machining, numerical control, also called computer numerical control (CNC), is the automated control of tools by means of a computer. It is used to operate tools such as drills, lathes, mills, grinders, routers and 3D printers. CNC transforms a piece of material into a specified shape by following coded programmed instructions and without a manual operator directly controlling the machining operation.

<span class="mw-page-title-main">Inclinometer</span> Instrument used to measure the inclination of a surface relative to local gravity

An inclinometer or clinometer is an instrument used for measuring angles of slope, elevation, or depression of an object with respect to gravity's direction. It is also known as a tilt indicator, tilt sensor, tilt meter, slope alert, slope gauge, gradient meter, gradiometer, level gauge, level meter, declinometer, and pitch & roll indicator. Clinometers measure both inclines and declines using three different units of measure: degrees, percentage points, and topos. The astrolabe is an example of an inclinometer that was used for celestial navigation and location of astronomical objects from ancient times to the Renaissance.

<span class="mw-page-title-main">Calipers</span> Tool used to measure dimensions of an object

Caliper(s) or calliper(s) are an instrument used to measure the dimensions of an object or hole; namely, the length, width, thickness, diameter or depth of an object or hole. The word caliper comes from latin roots meaning precise pincer.

<span class="mw-page-title-main">Indicator (distance amplifying instrument)</span> Distance amplifying instrument

In various contexts of science, technology, and manufacturing, an indicator is any of various instruments used to accurately measure small distances and angles, and amplify them to make them more obvious. The name comes from the concept of indicating to the user that which their naked eye cannot discern; such as the presence, or exact quantity, of some small distance.

<span class="mw-page-title-main">Tool and cutter grinder</span>

A Tool and Cutter Grinder is used to sharpen milling cutters and tool bits along with a host of other cutting tools.

<span class="mw-page-title-main">Metal lathe</span> Machine tool used to remove material from a rotating workpiece

In machining, a metal lathe or metalworking lathe is a large class of lathes designed for precisely machining relatively hard materials. They were originally designed to machine metals; however, with the advent of plastics and other materials, and with their inherent versatility, they are used in a wide range of applications, and a broad range of materials. In machining jargon, where the larger context is already understood, they are usually simply called lathes, or else referred to by more-specific subtype names. These rigid machine tools remove material from a rotating workpiece via the movements of various cutting tools, such as tool bits and drill bits.

<span class="mw-page-title-main">Coordinate-measuring machine</span> Device for measuring the geometry of objects

A coordinate-measuring machine (CMM) is a device that measures the geometry of physical objects by sensing discrete points on the surface of the object with a probe. Various types of probes are used in CMMs, the most common being mechanical and laser sensors, though optical and white light sensors do exist. Depending on the machine, the probe position may be manually controlled by an operator, or it may be computer controlled. CMMs typically specify a probe's position in terms of its displacement from a reference position in a three-dimensional Cartesian coordinate system. In addition to moving the probe along the X, Y, and Z axes, many machines also allow the probe angle to be controlled to allow measurement of surfaces that would otherwise be unreachable.

<span class="mw-page-title-main">Linear encoder</span>

A linear encoder is a sensor, transducer or readhead paired with a scale that encodes position. The sensor reads the scale in order to convert the encoded position into an analog or digital signal, which can then be decoded into position by a digital readout (DRO) or motion controller.

Renishaw plc is a British engineering company based in Wotton-under-Edge, England. The company's products include coordinate-measuring machines and machine tool products. It is listed on the London Stock Exchange and is a constituent of the FTSE 250 Index.

Level sensors detect the level of liquids and other fluids and fluidized solids, including slurries, granular materials, and powders that exhibit an upper free surface. Substances that flow become essentially horizontal in their containers because of gravity whereas most bulk solids pile at an angle of repose to a peak. The substance to be measured can be inside a container or can be in its natural form. The level measurement can be either continuous or point values. Continuous level sensors measure level within a specified range and determine the exact amount of substance in a certain place, while point-level sensors only indicate whether the substance is above or below the sensing point. Generally the latter detect levels that are excessively high or low.

Dimensional metrology, also known as industrial metrology, is the application of metrology for quantifying the physical size, form (shape), characteristics, and relational distance from any given feature.

<span class="mw-page-title-main">Press brake</span> Machine for bending sheet and plate material

A press brake is a type of brake, a machine used for bending sheet metal and metal plate. It forms predetermined bends by clamping the workpiece between a matching top tool and bottom die.

Universal measuring machines (UMM) are measurement devices used for objects in which geometric relationships are the most critical element, with dimensions specified from geometric locations rather than absolute coordinates. The very first uses for these machines was the inspection of gauges and parts produced by jig grinding. While bearing some resemblance to a coordinate-measuring machine (CMM), its usage and accuracy envelope differs significantly. While CMMs typically move in three dimensions and measure with a touch probe, a UMM aligns a spindle with a part geometry using a continuous scanning probe.

<span class="mw-page-title-main">STEP-NC</span> Machine tool control language

STEP-NC is a machine tool control language that extends the ISO 10303 STEP standards with the machining model in ISO 14649, adding geometric dimension and tolerance data for inspection, and the STEP PDM model for integration into the wider enterprise. The combined result has been standardized as ISO 10303-238.

<span class="mw-page-title-main">Capacitive displacement sensor</span>

Capacitive displacement sensors are "non-contact devices capable of high-resolution measurement of the position and/or change of position of any conductive target". They are also able to measure the thickness or density of non-conductive materials. Capacitive displacement sensors are used in a wide variety of applications including semiconductor processing, assembly of precision equipment such as disk drives, precision thickness measurements, machine tool metrology and assembly line testing. These types of sensors can be found in machining and manufacturing facilities around the world.

<span class="mw-page-title-main">Bending machine (manufacturing)</span>

A bending machine is a forming machine tool. Its purpose is to assemble a bend on a workpiece. A bend is manufactured by using a bending tool during a linear or rotating move. The detailed classification can be done with the help of the kinematics.

<span class="mw-page-title-main">High performance positioning system</span> Industrial Engineering method

A high performance positioning system (HPPS) is a type of positioning system consisting of a piece of electromechanics equipment (e.g. an assembly of linear stages and rotary stages) that is capable of moving an object in a three-dimensional space within a work envelope. Positioning could be done point to point or along a desired path of motion. Position is typically defined in six degrees of freedom, including linear, in an x,y,z cartesian coordinate system, and angular orientation of yaw, pitch, roll. HPPS are used in many manufacturing processes to move an object (tool or part) smoothly and accurately in six degrees of freedom, along a desired path, at a desired orientation, with high acceleration, high deceleration, high velocity and low settling time. It is designed to quickly stop its motion and accurately place the moving object at its desired final position and orientation with minimal jittering.

<span class="mw-page-title-main">Force control</span> Force control is given by the machine

Force control is the control of the force with which a machine or the manipulator of a robot acts on an object or its environment. By controlling the contact force, damage to the machine as well as to the objects to be processed and injuries when handling people can be prevented. In manufacturing tasks, it can compensate for errors and reduce wear by maintaining a uniform contact force. Force control achieves more consistent results than position control, which is also used in machine control. Force control can be used as an alternative to the usual motion control, but is usually used in a complementary way, in the form of hybrid control concepts. The acting force for control is usually measured via force transducers or estimated via the motor current.

References

  1. ↑ "The Characteristics and Functions of Touch Probe System for CNC Machines". Pioneer Group. Retrieved 2024-03-25.
  2. 1 2 3 "How Do Machine Tool Touch Probes Work?". EMG Precision. 24 August 2021. Retrieved 2024-03-25.
  3. ↑ "Touch Probes". CraftyCNC. Retrieved 2024-03-25.
  4. 1 2 3 "Using a CNC Touch Probe". CNC Training Centre. 14 June 2023. Retrieved 2024-03-25.
  5. ↑ "Tool Length Sensor for CNC Machining Centers". FlexiCAM. Retrieved 2024-03-25.
  6. ↑ "Touch Probe - Wiring and Setup". MASSO Documentation. Retrieved 2024-03-25.
  7. ↑ "The Evolution of Touch Probe Technology". Pioneer Group. Retrieved 2024-03-25.
  8. ↑ "Our History". Renishaw. Retrieved 2024-03-25.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.