A training sled, weight sled, or fitness sled is a piece of exercise equipment that provides resistance as the user pushes, pulls, or otherwise moves the sled along a flat surface. [1] Commercial sleds allow easily adjusting the weight or resistance and are supported on feet or wheels that allow moving the sled across surfaces such as grass, turf, or pavement without damage. Training with sleds has become increasingly popular since 2015, due in part to their availability in Crossfit gyms. [2] [3] Sled pulling and sled pushing are commonly used forms of training for sprinting. [4]
The sled push involves pushing the sled forward while facing the sled. It may be done at a variety of angles, such as upright, slightly bent forward, or with the body low and close to horizontal. [5] Sled pushes are roughly as effective as a barbell back squat for training the quadriceps, hamstrings, and core, with higher calf activity and lower activity in muscles near the spine. [6] The sled push also works the chest, arms, and shoulder muscles. [1]
Although sled pushing is a classic exercise, [7] athletic science has mainly focused on sled pulling, leaving sled pushing understudied. [4] One study found that the maximum velocity attainable during pushing decreases approximately linearly with total load, similarly to sled pulling, suggesting the analogous use of %Vdec to quantify load. This method of prescribing load first measures the velocity attained without any resistance, then adds weight so as to attain the target velocity which is the given percent less than the resistance-free velocity. For example, if the resistance-free velocity is 5 m/s, and the goal is 20% Vdec, one would add weight so as to achieve a velocity of 5*(1-20%)=4 m/s. [8] Another study found that complex training using sled pushing followed by sprinting improved sprint performance. [9]
The sled pull exercise involves attaching a harness or straps to the sled, or simply grabbing onto it. The user may walk forward, towing the sled, or face the sled and walk backwards while pulling the sled along. [5]
Several methods of prescribing load exist, such as an absolute weight, a percent of body mass (%BM), %Vdec, or the percent of maximum load movable a given distance without stopping or going below a specified velocity (%MRSL). The body-weight and absolute methods are simple but poor choices as they does not account for individual variation in strength or differences in surface friction. [10] Cahill et al. recommend the %Vdec method for general use. [4]
Sled pulling has been shown to improve sprint performance. Studies before 2014 used very light loads (<10% Vdec) to ensure sprint technique was unaffected, finding insignificant effects. More recent research has found that heavier loads are more effective in sprint training, although providing a disparate physical stimulus. [4] A wide range of loads, 10–30 %Vdec, has been shown to be effective. [10] Cahill et al. divide the loads as follows: <10% Vdec for technical high-speed training, <35% Vdec for training focusing on speed, [4] 48-52% Vdec for training power output, [11] and >65% Vdec for training focusing on strength. [4]
A lateral sled drag or pull involves dragging or pulling the sled while facing sideways. Sled rotations consist of turning the sled in place. [5] With a suspension strap, it is possible to do common upper body exercises such as rows, curls, presses, and reverse fly. [7]
Muscle fatigue is the decline in ability of muscles to generate force. It can be a result of vigorous exercise but abnormal fatigue may be caused by barriers to or interference with the different stages of muscle contraction. There are two main causes of muscle fatigue: the limitations of a nerve’s ability to generate a sustained signal ; and the reduced ability of the muscle fiber to contract.
Anaerobic exercise is a type of exercise that breaks down glucose in the body without using oxygen; anaerobic means "without oxygen". In practical terms, this means that anaerobic exercise is more intense, but shorter in duration than aerobic exercise.
Strength training or resistance training involves the performance of physical exercises that are designed to improve strength and endurance. It is often associated with the lifting of weights. It can also incorporate a variety of training techniques such as bodyweight exercises, isometrics, and plyometrics.
Plyometrics, also known as jump training or plyos, are exercises in which muscles exert maximum force in short intervals of time, with the goal of increasing power (speed-strength). This training focuses on learning to move from a muscle extension to a contraction in a rapid or "explosive" manner, such as in specialized repeated jumping. Plyometrics are primarily used by athletes, especially martial artists, sprinters and high jumpers, to improve performance, and are used in the fitness field to a much lesser degree.
The good-morning is a weight training exercise. It is known as a good morning because of the movement in the erector spinae which resembles the bow that traditionally begins a schoolday in some East-Asian countries. The erector spinae muscles of the lower back work isometrically to keep the spine in an extended position while the hamstrings and gluteus maximus work isotonically to perform hip extension. Other muscles are involved in stabilizing weight on the back and maintaining balance.
One-repetition maximum in weight training is the maximum amount of weight that a person can possibly lift for one repetition. It may also be considered as the maximum amount of force that can be generated in one maximal contraction.
Exercise equipment is any apparatus or device used during physical activity to enhance the strength or conditioning effects of that exercise by providing either fixed or adjustable amounts of resistance, or to otherwise enhance the experience or outcome of an exercise routine.
In weight training, training to failure is repeating an exercise to the point of momentary muscular failure, i.e. the point where the neuromuscular system can no longer produce adequate force to overcome a specific workload. Two systematic reviews published in 2021 found no benefit to training to failure on hypertrophy, while one of the reviews found some evidence that not-to-failure training is superior for strength.
Complex training, also known as contrast training or post-activation potentiation training, involves the integration of strength training and plyometrics in a training system designed to improve explosive power. According to Jace Derwin:
Strength training and plyometric training are both effective measures for increasing athletic performance independent of each other, but a true program designed for power-based athletes needs to incorporate both disciplines. A study done in 2000 in the NSCA's Journal of Strength and Conditioning Research measured three different training protocols: strength training, plyometric training, and a combination of both. The group that used combined methods was the only group that showed significant increases in BOTH strength and power.
Closed kinetic chain exercises or closed chain exercises (CKC) are physical exercises performed where the hand or foot is fixed in space and cannot move. The extremity remains in constant contact with the immobile surface, usually the ground or the base of a machine.
Progressive overload is a method of strength training and hypertrophy training that advocates for the gradual increase of the stress placed upon the musculoskeletal and nervous system. The principle of progressive overload suggests that the continual increase in the total workload during training sessions will stimulate muscle growth and strength gain by muscle hypertrophy. This improvement in overall performance will, in turn, allow the athlete to keep increasing the intensity of their training sessions.
A pull-up is an upper-body strength exercise. The pull-up is a closed-chain movement where the body is suspended by the hands, gripping a bar or other implement at a distance typically wider than shoulder-width, and pulled up. As this happens, the elbows flex and the shoulders adduct and extend to bring the elbows to the torso.
Spot reduction refers to the claim that fat in a certain area of the body can be targeted for reduction through exercise of specific muscles in that desired area. For example, exercising the abdominal muscles in an effort to lose weight in or around one's midsection. Fitness coaches and medical professionals as well as physiologists consider the claim to be disproved.
Bodyweight exercises are strength training exercises that use an individual's own weight to provide resistance against gravity. Bodyweight exercises can enhance a range of biomotor abilities including strength, power, endurance, speed, flexibility, coordination and balance. Such strength training has become more popular among recreational and professional athletes. Bodyweight training uses simple abilities like pushing, pulling, squatting, bending, twisting and balancing. Movements such as the push-up, the pull-up, and the sit-up are among the most common bodyweight exercises.
The inverted row is an exercise in calisthenics. It primarily works the muscles of the upper back—the trapezius and latissimus dorsi—as well as the biceps as a secondary muscle group. The supine row is normally carried out in three to five sets, but repetitions depend on the type of training a lifter is using to make their required gains. This exercise is lighter on the joints compared to weighted rows. The exercise can also be performed with mixed, underhand, or overhand grips with either wide or narrow hand placement.
A baseball doughnut is a weighted ring that fits over the end of a baseball bat, used for warming up during a baseball game. A doughnut is thought to help increase bat speed. Doughnuts can weigh as little as 4 oz. and as much as 28 oz. Players feel baseball doughnuts increase bat velocity because after warming up with a baseball doughnut then decreasing the weight after taking the doughnut off, the swing feels faster. The heavier load of the weighted bat stimulates the neural system and increases muscle activation during lighter bat swings. Researchers have found that muscle contractions are stronger after reaching near maximal loads. One research study also found that additional weight added to the bat may strengthen the muscles of the forearms and wrists. Baseball doughnuts are based on the theory of complex training, which alternates the use of heavier and lighter weights to increase explosive power. By increasing the number of motor units recruited, this training increases muscle performance.
A strength and conditioning coach is a physical performance professional who uses exercise prescription to improve the performance of competitive athletes or athletic teams. This is achieved through the combination of strength training, aerobic conditioning, and other methods.
Power training typically involves exercises which apply the maximum amount of force as fast as possible; on the basis that strength + speed = power. Jumping with weights or throwing weights are two examples of power training exercises. Regular weight training exercises such as the clean and jerk and power clean may also be considered as being power training exercises due to the explosive speed required to complete the lifts. Power training may also involve contrasting exercises such as heavy lifts and plyometrics, known as complex training, in an attempt to combine the maximal lifting exertions with dynamic movements. This combination of a high strength exercise with a high speed exercise may lead to an increased ability to apply power. Power training frequently specifically utilises two physiological processes which increase in conjunction with one another during exercise. These are deep breathing, which results in increased intra-abdominal pressure; and post-activation potentation, which is the enhanced activation of the nervous system and increased muscle fibre recruitment. Power training programmes may be shaped to increase the trainee's ability to apply power in general, to meet sports specific criteria, or both.
Velocity based training (VBT) is a modern approach to strength training and power training which utilises velocity tracking technology to provide rich objective data as a means to motivate and support real-time adjustments in an athlete's training plan. Typical strength and power programming and periodisation plans rely on the manipulation of reps, sets and loads as a means to calibrate training stressors in the pursuit of specific adaptations. Since the late 1990s, innovations in bar speed monitoring technology has brought velocity based training closer to the mainstream as the range of hardware and software solutions for measuring exercise velocities have become easier to use and more affordable.
Flywheel training is a type of strength training where the resistance required for muscle activation is generated by the inertia of a flywheel instead of gravity from weights as in traditional weight training.
You [just need] something heavy that you can push along a flat surface.