USCGC Assateague

Last updated
USCGC Assateague.jpg
History
Ensign of the United States Coast Guard.svg United States
NameUSCGC Assateague (WPB-1337)
NamesakeAssateague Island, Maryland & Virginia
Builder
Launched10 November 1989
Commissioned15 June 1990
Decommissioned13 October 2017 [1]
Homeport Apra Harbor, Guam
FateBerthed in Queensland, Australia, July 2018
StatusDecommissioned
General characteristics
Class and typeIsland class patrol cutter (WPB)
Displacement168 tons
Length110 ft (34 m)
Beam21 ft (6.4 m)
Speed28 knots (52 km/h; 32 mph)
Range2,000 miles
Complement18 personnel (2 Officers, 16 Enlisted)
Armament1 25mm manned auto-cannon, 2 50 Cal. Browning M2 machine guns, (minimum small arms armament: 2 12 gauge shot guns, 2 M16A1 rifles, 8 Sig P226R 40 Cal. Pistols)
Armor3/8th inch steel hull
Aircraft carriedNone

USCGC Assateague (WPB-1337) was an Island-class cutter of the United States Coast Guard. Assateague was constructed at Bollinger Machine Shop and Shipyard in Lockport, Louisiana, and commissioned on 15 June 1990.

Contents

Service history

Currently operating in the Coast Guard 14th District, the cutter reports to Sector Guam. Assateague supports multi-mission operations throughout Sector Guam’s vast area of responsibility, which includes the U.S. Exclusive Economic Zones surrounding Guam and the Commonwealth of the Northern Mariana Islands and an international SAR area that includes the Republic of Palau and the Federated States of Micronesia, conducting search and rescue response missions, and ports, waterways and coastal security operations. [2]

Design

The Island-class patrol boats were constructed in Bollinger Shipyards, Lockport, Louisiana. Assateague has an overall length of 110 feet (34 m). It had a beam of 21 feet (6.4 m) and a draft of 7 feet (2.1 m) at the time of construction. The patrol boat has a displacement of 154 tonnes (152 long tons; 170 short tons) at full load and 137 tonnes (135 long tons; 151 short tons) at half load. It is powered two Paxman Valenta 16 CM diesel engines. It has two 99 kilowatts (135 PS; 133 shp) 3304B diesel generators made by Caterpillar; these serve as motor–generators. Its hull is constructed from highly strong steel, and the superstructure and major deck are constructed from aluminium. [3] [4]

The Island-class patrol boats have maximum sustained speeds of 29.5 knots (54.6 km/h; 33.9 mph). It is fitted with one 25 millimetres (0.98 in) machine gun and two 7.62 millimetres (0.300 in) M60 light machine guns; it may also be fitted with two Browning .50 Caliber Machine Guns. It is fitted with satellite navigation systems, collision avoidance systems, surface radar, and a Loran C system. It has a range of 3,330 miles (2,890 nmi; 5,360 km) and an endurance of five days. Its complement is sixteen (two officers and fourteen crew members). Island-class patrol boats are based on Vosper Thornycroft 33 metres (108 ft) patrol boats and have similar dimensions. [3] [4] Coast Guard Cutter Assateague was decommissioned September 23, 2017.

Notes

  1. "US Coast Guard decommissioning cutter Assateague after 27 years of service". navaltoday.com. 22 September 2017. Retrieved 6 January 2018.
  2. Pacific Daily News Navigator On-line July 8, 2010
  3. 1 2 "110-foot Island Class Patrol Boat (WPB)" (PDF). United States Coast Guard. Retrieved 24 August 2015.
  4. 1 2 "USCG 110' "Island Class" Patrol Boats (WPB)". Bollinger Shipyards. Retrieved 24 August 2015.

Related Research Articles

Marine Protector-class patrol boat

The Marine Protector class is a class of coastal patrol boats of the United States Coast Guard. The 87-foot-long vessels are based on the Stan 2600 design by Damen Group, and were built by Bollinger Shipyards of Lockport, Louisiana. Each boat is named after sea creatures which fly or swim

Island-class patrol boat Class of cutters of the U.S. Coast Guard

The Island-class patrol boat is a class of cutters of the United States Coast Guard. 49 cutters of the class were built, of which 37 remain in commission. Their hull numbers are WPB-1301 through WPB-1349.

USCGC <i>Matagorda</i> (WPB-1303)

USCGC Matagorda (WPB-1303) is an Island-class patrol boat of the United States Coast Guard. She was commissioned 24 April 1986. Matagorda was one of eight of the 110-foot cutters to be modified under the Integrated Deepwater System Program aka. "Deepwater" to 123-foot. She was taken out of service about December 2006 due to problems with the Deepwater conversion.

USCGC <i>Ocracoke</i> Island-class patrol boat of the US Coast Guard

USCGC Ocracoke (WPB-1307) is an Island Class Cutter of the United States Coast Guard. She is homeported in Maine, where she patrols international and territorial waters as a humanitarian, law enforcement, and Homeland Security asset. Her primary missions are Search and Rescue, Counter-Smuggling Activities, and Homeland Security.

Ukrainian patrol vessel <i>Sloviansk</i> Former Island-class patrol boat

The Ukrainian patrol vessel Sloviansk (P190) was an Island-class patrol boat of the Naval Forces of the Armed Forces of Ukraine. Originally named USCGC Cushing when in service with the United States Coast Guard, the vessel was acquired by Ukraine in 2018 and arrived in Ukraine on 21 October 2019. Sloviansk was sunk in combat on 3 March 2022 by a Russian air-to-surface missile.

USCGC <i>Kiska</i> Island-class patrol boat of the US Coast Guard

USCGC Kiska (WPB-1336) is an Island-class cutter of the United States Coast Guard, named for the island of Kiska, Alaska.

USCGC <i>Mustang</i>

The USCGC Mustang (WPB-1310),, is an Island-class cutter of the United States Coast Guard. She is stationed in Seward, Alaska, at the top of the Gulf of Alaska. Mustang is one of seven Island-class patrol boats in Alaska. Her primary objective is maritime safety, though she is a multiple-role ship.

Bollinger Shipyards is an American constructor of ships, workboats and patrol vessels. Its thirteen shipyards and forty drydocks are located in Louisiana and Texas. Its drydocks range in capacity from vessels of 100 tons displacement to 22,000 tons displacement. The firm was founded in 1946.

USCGC <i>Knight Island</i>

USCGC Knight Island (WPB-1348) receives her namesake from the Knight Island in the Prince William Sounds of Alaska. Knight Island was commissioned on April 22, 1992, at Bollinger Shipyards in Lockport, Louisiana. Knight Island and the other 48 Island class cutter’s construction are based on the internationally known Vosper-Thornycroft design. Her hull is a semi-displacement type monohull made of high strength steel, while the main deck and superstructure are aluminum. Knight Island employs an active fin stabilization system to improve her sea keeping abilities. With a top speed in excess of 30 knots and a cruising speed of 26 knots, the ship is capable of enduring unsupported operations for six days and accommodates two officers and sixteen enlisted personnel.

USCGC Galveston Island is an Island-class patrol boat used by the United States Coast Guard for law enforcement and search and rescue duties. She was commissioned on 5 June 1992 and was the last of the Island-class patrol boats built. Her original homeport was Apra Harbor, Guam, but later changed to Honolulu, Hawaii, where she was decommissioned.

USCGC <i>Blue Shark</i>

USCGC Blue Shark (WPB-87360) is an 87-foot (27 m) long Marine Protector-class coastal patrol boat of the United States Coast Guard built by Bollinger Shipyards in Lockport, Louisiana.

PMSS <i>Sabqat</i>

USCGC Grand Isle (WPB-1338) was an Island-class patrol boat operated by the United States Coast Guard. She was based in Gloucester, Massachusetts, and named after Grand Isle, Louisiana. In 2016, the ship was transferred to Pakistan and renamed Sabqat.

USCGC <i>Anacapa</i> U.S. Coast Guard patrol boat

USCGC Anacapa (WPB-1335) is an Island-class cutter of the United States Coast Guard. She is based at Petersburg, Alaska and is responsible for law enforcement, search and rescue, and maritime defense.

USCGC <i>Dorado</i> United States Coast Guard Marine Protector-class patrol boat

USCGC Dorado (WPB-87306) was the sixth cutter of the Marine Protector-class patrol boats. Dorado was built at Bollinger Shipyards in Lockport, Louisiana and commissioned in April 1999 and decommissioned on 10 March 2021. Dorado's home port was in Crescent City, California and served under Coast Guard Group Humboldt Bay in the Eleventh Coast Guard District.

USCGC <i>Liberty</i> U.S. Coast Guard vessel

USCGC Liberty (WPB-1334) is an Island-class cutter of the United States Coast Guard. She spent her first 33 years of service homeported in Juneau, Alaska where she patrolled territorial waters, including the Inside Passage. In 2016 she won the Hopley Yeaton Cutter Excellence Award for outstanding operational and humanitarian achievements. In 2022 she was reassigned to Valdez, Alaska.

USCGC <i>Halibut</i>

USCGC Halibut is a United States Coast Guard Marine Protector-class coastal patrol boat based in Marina del Rey, California. Her patrol area is the 300 miles (480 km) from Morro Bay to Dana Point, California, and several important offshore islands.

USCGC <i>Raymond Evans</i>

USCGC Raymond Evans is the tenth vessel in the United States Coast Guard's Sentinel-class cutter. All the vessels are named after members of the Coast Guard, or its precursor services, who are remembered for their heroism. Names had already been assigned for the first fourteen vessels, when Commander Raymond Evans died, and the USCG Commandant announced that the next Sentinel class cutter would be named after him. Joseph Napier, who was originally scheduled to be the namesake of the tenth vessel, had his name moved to the beginning of the second list of heroes names, and will now be the namesake of the fifteenth vessel.

USCGC <i>Sapelo</i>

The USCGC Sapelo (WPB-1314) is an Island class cutter, operated by the United States Coast Guard. In 2013, unlike other Island class cutters, she was not commanded by a commissioned officer, she was commanded by a Chief Warrant Officer.

USCGC <i>Washington</i> Island-class patrol boat of the US Coast Guard

USCGC Washington (WPB-1331) is an Island-class cutter of the United States Coast Guard. Washington was constructed at Bollinger Machine Shop and Shipyard in Lockport, Louisiana, and commissioned on 15 June 1990.

USCGC <i>Terrapin</i> United States Coast Guard ship

USCGC Terrapin (WPB-87366) is a United States Coast Guard ship of the Marine Protector class. She is assigned to Coast Guard District 13 and is home-ported at Bellingham, Washington. Her main areas of responsibility are the San Juan Islands, the Strait of Juan de Fuca, and Puget Sound. Her missions include search and rescue, law enforcement, and homeland security.

References