USCGC Catenary

Last updated
History
Flag of the United States.svgUnited States
NameCatenary
Namesake Catenary is the slack in an anchor line when a ship is at anchor.
BuilderGibbs Gas Engine Company, Jacksonville, Florida [1]
CommissionedApril 1962
Decommissioned1 May 1995
Identification
FateSold to the United States Merchant Marine Academy. Sold in 2018 to Stasinos Marine LLC.
General characteristics
Displacement74 tons
Length64 ft 11 in (19.79 m) [2]
Beam19 ft 1 in (5.82 m)
Draft9 ft (2.7 m)
Propulsion1 Caterpillar D375 V-8 diesel; 400 shaft horsepower [3]
Speed(cruising) 7.0 kn (13.0 km/h; 8.1 mph)
Range(cruising) 3,690 nmi (6,830 km)
Complement5
ArmamentNone

USCGC Catenary (WYTL-65606) was a cutter in the United States Coast Guard (USCG). Constructed by the Gibbs Gas Engine Company and commissioned in early 1962, the vessel served as part of the USCG for over 30 years before being decommissioned in mid-1995 and sold to the United States Merchant Marine Academy. During her service Catenary was based primarily on the east coast of the United States where she was utilized mainly in a law enforcement role.

Contents

Construction and design

Crewed by five personnel, Catenary was a small vessel displacing 74 tons. She was 64 ft 11 in (19.79 m) long, [2] with a beam of 19 ft 1 in (5.82 m) and a 9 ft (2.7 m) draft. The vessel's powerplant consisted of one Caterpillar D375 V-8 diesel engine which produced 400 shaft horsepower and drove a single propeller, [3] giving a cruising speed of 7.0 kn (13.0 km/h; 8.1 mph) and a cruising range of 3,690 nmi (6,830 km). Her maximum speed was 10.6 kn (19.6 km/h; 12.2 mph), at which she could patrol 1,130 nmi (2,090 km). [3] She carried no armament, but was fitted with a SPN-11 detection radar. Upon completion she cost a total of $US 158,366 to construct. [3]

History

Catenary was one of fifteen steel-hulled icebreaking small harbor tugs that were put into service in the 1960s to replace 64 ft (20 m) wooden-hulled harbor tugs that the Coast Guard had used since the 1940s. [2] Catenary was one of six in her class constructed by the Gibbs Gas Engine Company (later acquired by Aerojet General Corp.) in Jacksonville, Florida. [1] After being commissioned in April 1962, she was initially homeported at Gloucester City, New Jersey, and served there until June 1988 when she was reassigned to Philadelphia, Pennsylvania. Her duties included law enforcement and search and rescue as well as ice operations. [2]

On 1 May 1995, Catenary was decommissioned and sold to the United States Merchant Marine Academy. She served as a training vessel under the name MV Growler. She performed training missions involving shiphandling, maneuvering, navigation, and towing, as well as participating in Merchant Marine Academy public relations trips throughout Long Island Sound, the East River, and New York Harbor. [3] The vessel was operated by crews of midshipmen participating in the Academy's Power Squadron, a fleet of power-driven vessels used for everything from fishing to long-range trips. [3]

Related Research Articles

Island-class patrol boat Class of cutters of the U.S. Coast Guard

The Island-class patrol boat is a class of cutters of the United States Coast Guard. 49 cutters of the class were built, of which 7 remain in commission. Their hull numbers are WPB-1301 through WPB-1349.

USCGC <i>Mackinaw</i> (WAGB-83) Former Coast Guard icebreaker, now a museum ship

USCGC Mackinaw (WAGB-83) is a 290-foot (88 m) former Coast Guard icebreaker on exhibit as a museum ship at the Icebreaker Mackinaw Maritime Museum in Mackinaw City, Michigan. The vessel has been known as the "Queen of the Great Lakes"; the site states that "she was built during World War II to meet the heavy demands of war materials and transportation during the winter months".

<span class="mw-page-title-main">Long Range Interceptor</span>

The Long Range Interceptor (LRI) is an 11-meter high speed launch vessel designed to be deployed from United States Coast Guard cutters via a rear launching ramp. The Long Range Interceptor is an aluminum boat, powered by Ultrajet brand water-jets, for intercepting and boarding suspect vessels. It mounts a radar, special shock-proof seats, and can travel at 35 knots (65 km/h). They can be armed with machine guns or grenade launchers, and can be equipped with ballistic panels for crew protection when required.

<i>Hamilton</i>-class cutter United States Coast Guard cutter class

The Hamilton-class cutter was the largest class of vessel in the United States Coast Guard until replaced by the Legend-class cutter, aside from the Polar-class icebreaker. The hull classification symbol is prefixed WHEC. The cutters are called the Hamilton class after their lead ship, or the "Secretary class" because most of the vessels in the class were named for former Secretaries of the Treasury, with the exception of the "Hero-class cutters" Jarvis, Munro and Midgett.

USCGC <i>Bollard</i>

USCGC Bollard (WYTL-65614) is a cutter in the U.S. Coast Guard.

USCGC <i>Sassafras</i> C-class buoy tender, 1943-2003 (now NNS Obula)

Sassafras is a C-Class, 180 ft, seagoing buoy tender constructed for the USCG by Marine Iron & Shipbuilding Corp. of Duluth, Minnesota. Sassafras was one of 39 tenders commissioned for duties that would include aids-to-navigation, ice breaking, search-and-rescue, fire fighting, law enforcement, providing fuel and potable water, and assistance to the National Oceanographic and Seismographic Survey.

<span class="mw-page-title-main">United States Coast Guard Cutter</span> Commissioned vessel of the U.S. Coast Guard

United States Coast Guard Cutter is the term used by the U.S. Coast Guard for its commissioned vessels. They are 65 feet (19.8 m) or greater in length and have a permanently assigned crew with accommodations aboard. They carry the ship prefix USCGC.

USCGC <i>Mellon</i>

USCGC Mellon (WHEC-717) was the third United States Coast Guard Hamilton-class high endurance cutter constructed. The 2,748-ton cutter’s ocean crossing range was 10,000 miles at 20 knots.

USCGC <i>Boutwell</i> (WHEC-719) Ship of the US Coast Guard (1968-2016)

USCGC Boutwell (WHEC-719) was a United States Coast Guard high endurance cutter based out of San Diego, California. Named for George S. Boutwell, United States Secretary of the Treasury under President Ulysses S. Grant. Boutwell engaged in many Coast Guard missions, including search and rescue, law enforcement, maritime security, and national defense.

USCGC <i>Swivel</i>

USCGC Swivel (WYTL-65603) was one of fifteen 65-foot steel-hulled harbor tugs, that entered service with the United States Coast Guard in the 1960s. Each was built to replace the 64-foot wooden-hulled harbor tugs built during the 1940s.

Ukrainian patrol vessel <i>Sloviansk</i> Former Island-class patrol boat

The Ukrainian patrol vessel Sloviansk (P190) was an Island-class patrol boat of the Naval Forces of the Armed Forces of Ukraine. Originally named USCGC Cushing when in service with the United States Coast Guard, the vessel was acquired by Ukraine in 2018 and arrived in Ukraine on 21 October 2019. Sloviansk was sunk in combat on 3 March 2022 by a Russian air-to-surface missile.

USCGC <i>Citrus</i>

USCGC Citrus (WAGL-300/WLB-300/WMEC-300) was a Cactus (A)-class seagoing buoy tender built in 1942 in Duluth, Minnesota, and now operated by the navy of the Dominican Republic.

USCGC <i>Sycamore</i> (WLB-209)

USCGC Sycamore (WLB-209) is a United States Coast Guard seagoing buoy tender, the second of her name and the ninth of the Juniper-class. She is now home-ported in Newport, Rhode Island, following a one year long Midlife Maintenance Availability (MMA) in Baltimore, Maryland. She was originally home-ported in Cordova, Alaska. Sycamore primarily tends to aids-to-navigation (ATON) in Martha's Vineyard, the Long Island Sound, Hudson River, and New York City Harbor and entrances; however she is also responsible for maintenance support of National Data Buoy Center's offshore weather buoys. In addition to her primary ATON role, Sycamore also performs other duties, such as, marine environmental protection, maritime law enforcement, domestic icebreaking, search and rescue, and homeland security missions.

USCGC Clover WAGL/WLB/WMEC-292, a Cactus (A) Class buoy tender was built by Marine Iron and Shipbuilding, Duluth, Minnesota. Her keel was laid 3 December 1941, and she was launched 25 April 1942. She was commissioned on 8 November 1942 in the United States Coast Guard as the United States Coast Guard Cutter Clover. She was built as a WAGL, redesignated a WLB in 1965, and again redesignated a WMEC in 1979.

USCGC Tupelo WAGL/WLB-303, was a Cactus (A) Class 180-foot buoy tender vessel built by Zenith Dredge Company of Duluth, Minnesota. Her keel was laid 15 August 1942, launched 28 November 1942 and commissioned on 30 August 1943. She was built as a WAGL and redesignated a WLB in 1965.

USCGC Bitt (WYTL-65613) was a cutter in the U.S. Coast Guard. Constructed by Western Boat Building Corp and commissioned in 1966, the vessel served as part of the USCG for sixteen years before being decommissioned in 1982 and transferred to the National Science Foundation (NSF). During her Coast Guard service, Bitt was based in Washington and Alaska, where she was utilized mainly in a law enforcement and search and rescue (SAR) role. She was purchased by a civilian couple living and raising their first child aboard the vessel.

USCG 65 Small harbor tug

The USCG 65' small harbor tug is a class of fifteen tugs used by the United States Coast Guard for search and rescue, law enforcement, aids-to-navigation work and light icebreaking. The tugs are capable of breaking 18 in (0.46 m) of ice with propulsion ahead and 21 in (0.53 m) of ice backing and ramming. They were designed with steel hulls to replace the 64 ft (20 m) wooden-hulled tugs that had been in service since the 1940s and were built by Gibbs Gas Engine Company, Jacksonville, Florida; Barbour Boat Works of New Bern, North Carolina; and Western Boat Builders Corporation, Tacoma, Washington from 1961 to 1967. They were originally powered by a single 400 horsepower diesel engine, however several have been re-powered with 500 horsepower main drive engines since they were constructed.

USCGC <i>Salvia</i> Iris-class buoy tender

USCGC Salvia (WLB-400) was a United States Coast Guard Iris-class buoy tender in commission from 1944 to 1991. She operated in the Great Lakes and along the United States Gulf Coast during her career. Sold and renamed Brian Davis in 2020 for use as a memorial vessel, she was scuttled as an artificial reef in 2020.

USCGC <i>Legare</i> (WSC-144) US Coast Guard Cutter

USCGC Legare (WSC-144) was cutter that served in the United States Coast Guard for almost forty-one years.

USCGC <i>Jackson</i> United States Coast Guard cutter

USCGC Jackson was an Active-class cutter of the United States Coast Guard. She capsized in 1944, killing twenty one of forty crew members.

References

  1. 1 2 "Gibbs Gas Engine Company". Small Shipbuilders and Boatbuilders List. Shipbuilding History.com. Retrieved 16 June 2012.
  2. 1 2 3 4 "Data Sheet for 65' WYTL tug" (asp). USCGC Catenary (WYTL-65606). U.S. Coast Guard. Retrieved 16 June 2012.
  3. 1 2 3 4 5 6 "MV Growler". Merchant Marine Academy Power Squadron. United States Merchant Marine Academy. Retrieved 16 June 2012.

Further reading