USCGC George Cobb | |
History | |
---|---|
United States | |
Name | George Cobb |
Operator | US Coast Guard |
Builder | Marinette Marine Corporation |
Launched | 18 December 1999 |
Commissioned | 27 October 2000 |
Homeport | San Pedro, California |
Identification |
|
Status | Active |
Badge | |
General characteristics | |
Type | Keeper-class buoy tender |
Displacement | 850 long tons (864 t) full load |
Length | 175 ft (53.3 m) |
Beam | 36 ft (11.0 m) |
Draft | 8 ft (2.4 m) |
Installed power | 2,000 hp (1,500 kW) sustained |
Propulsion | 2 × Caterpillar 3508 DITA Diesel engines; bow thruster, 500 hp (373 kW) |
Speed | 12 knots (22 km/h; 14 mph) |
Range | 2000 nautical miles at 10 kn |
Crew | 24 (2 Officers, 22 Enlisted) |
USCGC George Cobb (WLM-564) is a Keeper-class coastal buoy tender of the United States Coast Guard. Launched in 1999, she is home-ported in San Pedro, California. Her primary mission is maintaining over 178 floating aids to navigation on the California coast from San Francisco to San Diego. Secondary missions include marine environmental protection, search and rescue, and security. She is assigned to the Eleventh Coast Guard District. [1]
On 22 June 1993 the Coast Guard awarded the contract for the Keeper-class vessels to Marinette Marine Corporation in the form of a firm contract for the lead ship and options for thirteen more. [2] The Coast Guard exercised options for the final four, including George Cobb, in September of 1997. [3] The ship was launched on 18 December 1999 into the Menominee River. [4] George Cobb is the last of the fourteen Keeper-class ships built. [1]
Her hull was built of welded steel plates. She is 175 feet (53 m) long, with a beam of 36 feet (11 m), and a full-load draft of 8 feet (2.4 m). [5] George Cobb displaces 850 long tons fully loaded. [6] Her gross register tonnage is 904, and her net register tonnage is 271. [7] The top of the mast is 58.75 feet (17.91 m) above the waterline. [8]
Rather than building the ship from the keel up as a single unit, Marinette Marine used a modular fabrication approach. Eight large modules, or "hull blocks" were built separately and then welded together. [5]
The ship has two Caterpillar 3508 DITA (direct-injection, turbocharged, aftercooled) 8-cylinder Diesel engines which produce 1000 horsepower each. These drive two Ulstein Z-drives. Keeper-class ships were the first Coast Guard cutters equipped with Z-drives, which markedly improved their maneuverability. [9] The Z-drives have four-bladed propellers which are 57.1 inches (145 cm) in diameter [8] and are equipped with Kort nozzles. They can be operated in "tiller mode" where the Z-drives turn in the same direction to steer the ship, or in "Z-conn mode" where the two Z-drives can turn in different directions to achieve specific maneuvering objectives. An implication of the Z-drives is that there is no reverse gear or rudder aboard George Cobb. In order to back the ship, the Z-drives are turned 180 degrees which drives the ship stern-first even though the propellers are spinning in the same direction as they do when the ship is moving forward. [10] Her maximum speed is 12 knots. [9] Her tanks can hold 16,385 gallons of diesel fuel [8] which gives her an unrefueled range of 2,000 nautical miles at 10 knots. [11]
She has a 500 horsepower bow thruster. The Z-drives and bow thruster can be linked in a Dynamic Positioning System. This gives George Cobb the ability to hold position in the water even in heavy currents, winds, and swells. This advanced capability is useful in bringing buoys aboard that can weigh more than 16,000 lbs. [6]
Electrical power aboard is provided by three Caterpillar 3406 DITA generators which produce 285 Kw each. [6] She also has a 210 Kw emergency generator, which is a Caterpillar 3406 DIT. [8]
The buoy deck has 1,335 square feet (124.0 m2) of working area. A crane with a boom 42 feet (13 m) long lifts buoys and their mooring anchors onto the deck. The crane can lift up to 20,000 pounds (9,100 kg). [6]
The ships' fresh water tanks can hold 7,339 gallons. She has three ballast tanks that can be filled to maintain their trim, and tanks for oily waste water, sewage, gray water, new lubrication oil, and waste oil. [8]
Accommodations were designed for mixed gender crews from the start. Crew size and composition has varied over the years. Her current complement is two officers and twenty-two enlisted personnel. [1]
George Cobb, as all Keeper-class ships, has a strengthened "ice belt" along the waterline so that she can work on aids to navigation in ice-infested waters. Not only is the hull plating in the ice belt thicker than the rest of the hull, but framing members are closer together in areas that experience greater loads when working in ice. Higher grades of steel were used for hull plating in the ice belt to prevent cracking in cold temperatures. Her bow is sloped so that rather than smashing into ice, she rides up over it to break it with the weight of the ship. George Cobb is capable of breaking flat, 9-inch thick ice at 3 knots. [10] Given her southern posting, the ship has not been used in an ice-breaking role.
The ship carries a cutter boat on davits. She was originally equipped with a CB-M boat which was replaced in the mid-2010s with a CB-ATON-M boat. This was built by Metal Shark Aluminum Boats and was estimated to cost $210,000. [12] The boat is 18 feet (5.5 m) long and are equipped with a Mercury Marine inboard/outboard diesel engine. [13]
The ship's namesake is lighthouse keeper George Cobb. He had a long career tending a number of California lighthouses, but is best known for his service at the Oakland Harbor Light. In 1896 Cobb was an assistant keeper at the light. On 26 December 1896, a sailboat capsized in rain squalls near the light and Cobb rowed out and saved two men who clung to the keel. [14] In 1903 he was awarded the silver lifesaving medal for his bravery. [15]
George Cobb replaced USCGC Conifer, which was decommissioned in 2000. [16]
The Coast Guard took ownership of George Cobb on 22 June 2000, and placed her "in commission, special" status. To reach her new home port in California, she sailed from Lake Michigan through the Great Lakes, out into the Atlantic, and through the Panama Canal. This voyage took 108 days to complete. She was placed in full commission at a ceremony in San Pedro on 27 October 2000. [1] [17]
George Cobb's buoy tending involves lifting them onto her deck where marine growth is scraped and pressure washed off, inspecting the buoy itself, and replacing lights, solar cells, and radar transponders. The mooring chain or synthetic cable is inspected and replaced as needed. The concrete block mooring anchor is also inspected. [16] In addition to maintaining aids to navigation, George Cobb has also been dispatched to maintain NOAA weather buoys. [18]
The bulk of George Cobb's year is spent at sea tending its buoys, or in port maintaining the ship. She has been asked to perform other missions, as described below.
Two light planes collided in mid-air near the Long Beach harbor breakwater in February 2001. George Cobb served as a dive platform for efforts to recover bodies and debris. [19] During April 2006, she was sent to assist a 23-foot vessel that was disabled and adrift near the Long Beach breakwater. [20] A Coast Guard C-130 Hercules collided in mid-air with a Marine Corps AH-1W Super Cobra helecopter near San Clemente Island on 29 October 2009. A number of Coast Guard and Marine units were sent to the crash site to search for survivors, including George Cobb. [21] On 4 October 2011, the ship was dispatched to assist a 45-foot sailboat that had gone aground on Santa Cruz Island. [22]
Sixty members of FBI SWAT teams participated in boarding exercises aboard George Cobb in May 2007. The ship provided security zone enforcement for the 2010 San Francisco Fleet Week. [23]
In December 2007, a sea lion weighing 1,100 pounds (500 kg) was embarked on George Cobb. The animal had been rehabilitated by the Pacific Marine Mammal Center and was released back into the wild near San Clemente Island. [24] In September 2011, the ship deployed the Vessel of Opportunity Skimming System in an oil spill training exercise. [25] The Woods Hole Oceanographic Institution developed an autonomous underwater vehicle to detect oil spills. In 2019 George Cobb launched the vehicle in the Santa Barbara Channel as part of a joint exercise between the Institution, NOAA, and The Environmental Protection Agency. [26] [27]
The Coast Guard has offered tours aboard George Cobb on several occasions. These include:
In April 2008, George Cobb hosted a delegation from the Russian Border Guard, which had similar responsibilities to the US Coast Guard. [35] In October 2011, the ship hosted 34 cadets from Oakland Military Institute for a one-day cruise. [36]
George Cobb was awarded the Coast Guard Special Operations Service Ribbon for her participation in Operation Able Venture in 2006. [37]
The Keeper class of coastal buoy tenders consists of fourteen ships built for and operated by the United States Coast Guard. The ships were launched between 1995 and 1999 and all remain in active service. Their primary mission is to maintain thousands of aids to navigation, both buoys and land-based. Their secondary missions include marine environmental protection, search and rescue, law enforcement, and light ice-breaking.
United States Coast Guard Cutter is the term used by the U.S. Coast Guard for its commissioned vessels. They are 65 feet (19.8 m) or greater in length and have a permanently assigned crew with accommodations aboard. They carry the ship prefix USCGC.
USCGC Juniper (WLB-201) is the lead ship of the U.S. Coast Guard's current class of seagoing buoy tenders. She is outfitted with some of the most advanced technological and navigational capabilities currently available.
The USCGC Evergreen was a Cactus-class seagoing buoy tender operated by the United States Coast Guard. She served in the North Atlantic during World War II and participated in the International Ice Patrol in these waters after the war. She was the first dedicated oceanographic vessel in the Coast Guard's history. She was decommissioned in 1990 and sunk by the US Navy for target practice in 1992.
USCGC Fir (WLB-213) is a Juniper-class cutter of the United States Coast Guard. USCGC Fir is under the Operational Control (OPCON) of the Commander of the Thirteenth Coast Guard District and is homeported in Astoria, Oregon. Fir's primary area of responsibility is the coastal waters, river bars and high seas of the Washingtonian and Oregonian coasts. USCGC Fir conducts heavy lift aids to navigation operations, law enforcement and other missions as directed.
USCGC Elm (WLB-204) is a U.S. Coast Guard Juniper-class seagoing buoy tender home-ported in Astoria, Oregon. She is responsible for maintaining aids to navigation on the coasts of Oregon and Washington, including the Columbia River.
USCGC Henry Blake (WLM-563) is a United States Coast Guard Keeper-class cutter based at Naval Station Everett in Everett, WA. Henry Blake's primary mission is the maintenance of 80 lighted, 39 unlighted, and 65 shore-based aids to navigation in the Puget Sound area and along the coast of Washington. Secondary missions include marine environmental protection, search and rescue, and homeland security. Henry Blake is assigned to the Thirteenth Coast Guard District.
USCGS Katherine Walker (WLM-552) is a Keeper-class coastal buoy tender of the United States Coast Guard. Launched in 1996, she has spent her entire career homeported at Bayonne, New Jersey. Her primary mission is to maintain 335 aids to navigation in New York Harbor, Long Island Sound, and surrounding waters. She is assigned to the First Coast Guard District.
USCGC Ida Lewis (WLM-551) is the lead ship of the United States Coast Guard Keeper-class of Coastal Buoy Tenders. Launched in 1995, she has spent her entire career maintaining navigational aids near her homeport of Newport, Rhode Island. Ida Lewis is assigned to the First Coast Guard District.
USCGC Anthony Petit (WLM-558) is a Keeper-class coastal buoy tender of the United States Coast Guard. Launched in 1999, she has served her entire career maintaining navigational aids in Southeast Alaska. She is assigned to the Seventeenth Coast Guard District.
USCGC Terrapin (WPB-87366) is a United States Coast Guard ship of the Marine Protector class. She is assigned to Coast Guard District 13 and is home-ported at Bellingham, Washington. Her main areas of responsibility are the San Juan Islands, the Strait of Juan de Fuca, and Puget Sound. Her missions include search and rescue, law enforcement, and homeland security.
USCGC Marcus Hanna (WLM-554) is a Keeper-class coastal buoy tender of the United States Coast Guard. Launched in 1997, she is home-ported in South Portland, Maine. Her primary mission is maintaining 376 aids to navigation from Boston to St. John's Bay, Maine. Secondary missions include marine environmental protection, light icebreaking, search and rescue, and security. She is assigned to the First Coast Guard District.
USCGC Abbie Burgess (WLM-553) is a Keeper-class coastal buoy tender of the United States Coast Guard. Launched in 1997, she is home-ported in Rockland, Maine. Her primary mission is maintaining 366 aids to navigation from Boothbay Harbor, Maine to the Canadian border. Secondary missions include marine environmental protection, light icebreaking, search and rescue, and security. She is assigned to the First Coast Guard District.
USCGC James Rankin (WLM-555) is a Keeper-class coastal buoy tender of the United States Coast Guard. Launched in 1998, she is home-ported at the Coast Guard Yard in Baltimore, Maryland. Her primary mission is maintaining 361 aids to navigation in Upper Chesapeake Bay and its tributaries including the Eastern Shore of Maryland, the Potomac River, and the Annapolis area. Secondary missions include marine environmental protection, light icebreaking, search and rescue, and security. She is assigned to the Fifth Coast Guard District.
USCGC Frank Drew (WLM-557) is a Keeper-class coastal buoy tender of the United States Coast Guard. Launched in 1998, she is home-ported in Portsmouth, Virginia. Her primary mission is maintaining over 300 aids to navigation in lower Chesapeake Bay, the rivers that flow into it, and a potion of the North Carolina Coast. Secondary missions include marine environmental protection, light icebreaking, search and rescue, and security. She is assigned to the Fifth Coast Guard District.
USCGC William Tate (WLM-560) is a Keeper-class coastal buoy tender of the United States Coast Guard. Launched in 1999, she is home-ported in Philadelphia, Pennsylvania. Her primary mission is maintaining over 260 aids to navigation on the Delaware River, in Delaware Bay and in nearby waterways. Secondary missions include marine environmental protection, search and rescue, and security. She is assigned to the Fifth Coast Guard District.
USCGC Maria Bray (WLM-562) is a Keeper-class coastal buoy tender of the United States Coast Guard. Launched in 1999, she is home-ported in Atlantic Beach, Florida. Her primary mission is maintaining over 300 aids to navigation from Georgetown, South Carolina to Fort Pierce, Florida. Secondary missions include marine environmental protection, search and rescue, and security. She is assigned to Sector Jacksonville of the Seventh Coast Guard District.
USCGC Harry Claiborne (WLM-561) is a Keeper-class coastal buoy tender of the United States Coast Guard. Launched in 1999, she is home-ported in Galveston, Texas. Her primary mission is maintaining aids to navigation between the Mexican boarder and the mouth of the Mississippi River. Secondary missions include marine environmental protection, search and rescue, and security. She is assigned to the Eighth Coast Guard District.
USCGC Barbara Mabrity (WLM-559) is a Keeper-class coastal buoy tender of the United States Coast Guard. Launched in 1999, she is home-ported in Mobile, Alabama. Her primary mission is maintaining aids to navigation from western Florida to the Mississippi River. Secondary missions include marine environmental protection, search and rescue, and security. She is assigned to the Eighth Coast Guard District.