USCGC Minnetonka

Last updated
USCGCMinnetonkaWHEC67.jpg
USCGC Minnetonka (WHEC-67), at anchor in An Thoi Harbor, Phu Quoc Island, South Vietnam.
History
Ensign of the United States Coast Guard (1915-1953).pngUnited States
NameMinnetonka
Operator United States Coast Guard
Builder Western Pipe & Steel
Launched2 November 1945
ChristenedSunapee
Acquired11 July 1946
Commissioned11 July 1946
Decommissioned31 May 1974
FateScrapped, 1974 [1]
General characteristics
Type Owasco-class cutter
Displacement
  • 1,978 full (1966)
  • 1,342 light (1966)
Length
  • 254 ft (77.4 m) oa.
  • 245 ft (74.7 m) pp.
Beam43 ft 1 in (13.1 m)
Draft17 ft 3 in (5.3 m) (1966)
Installed power4,000  shp (3,000 kW) (1945)
Propulsion1 × Westinghouse electric motor driven by a turbine, (1945)
Speed17 knots (31 km/h; 20 mph).
Range
  • 6,157 mi (9,909 km) at 17 knots
  • 10,376 mi (16,699 km) at 10 knots (19 km/h; 12 mph) (1966)
Complement10 officers, 3 warrants, 130 enlisted (1966)
Sensors and
processing systems
  • Detection Radar: SPS-23, SPS-29, Mk 26, Mk 27 (1966)
  • Sonar: SQS-1 (1966)
Armament
NotesFuel capacity: 141,755 gal (Oil, 95%).

USCGC Minnetonka (WHEC-67) was an Owasco class high endurance cutter built for World War II service with the United States Coast Guard. The war ended before the ship was completed and consequently Minnetonka did not see wartime service until the Vietnam War.

Contents

Minnetonka was built by Western Pipe & Steel at the company's San Pedro shipyard. Originally christened Sunapee, she was renamed after Lake Minnetonka, Minnesota, and commissioned as a patrol gunboat with ID number WPG-67 on 11 July 1946. Her ID was later changed to WHEC-67 (HEC for "High Endurance Cutter" - the "W" signifies a Coast Guard vessel). [2] [3]

Peacetime service

Minnetonka was stationed at San Pedro, CA, from 20 September 1946 to 7 March 1951. She was used for law enforcement, ocean station, and search and rescue operations in the Pacific.

On 2 and 3 January 1951, Minnetonka assisted MV Keisin Maru at 38°41’N, 152°00’E. From 23 to 15 January 1951, she assisted MV Oregon Mail at 46°35’N, 166°34’E. From 7 March 1951 to 31 May 1974, Minnetonka was homeported at Long Beach, California, and used for the same duties as listed above. On 8 September 1954, she assisted FV American at 33°08’N, 120°44’W. From 6 to 8 May 1955, she patrolled the Ensenada Race. On 24 August 1956, she towed the disabled schooner Atlantic to Kodiak, Alaska. On 8 November 1957, she searched for the Pan-American stratocruiser Romance of the Skies between San Francisco and Honolulu. 19 bodies were recovered on the sixth day of the search.

On 8 July 1959, Minnetonka towed the disabled FV Ruth K to Long Beach, California. On 17 and 18 December 1959, she assisted MV Guam Pioneer at 31°23’N, 124°37’W. On 28 and 19 August 1961, she towed the disabled FV Alaska Reefer to Port Townsend, Washington. On 11 and 12 February 1962, she assisted FV Western Fisher. Minnetonka served on reserve cruise from 10 to 13 August 1962. On 30 July 1967, Minnetonka rescued six people from FV Sea Boy off California.

Vietnam war

Minnetonka was assigned to Coast Guard Squadron Three, South Vietnam, from 5 January to 29 September 1968. On the night of 29 February/1 March, she forced an enemy trawler, attempting to resupply the Viet Cong near Qui Nhon, to abandon its mission. During her 305-day deployment, the Minnetonka was called in for 51 Naval Gunfire Support missions to support both U.S. and Vietnamese troops ashore. She fired a total 4,684 rounds of 5 in (130 mm)/38 ammunition, consisting of high-explosive, white phosphorus, and illumination projectiles during these missions. The Minnetonka had 49 underway replenishments, receiving food, ammunition, mail, and personnel during her deployment to Southeast Asia. She steamed total of 59,685 miles, leaving Long Beach, California on 17 December 1967 and returning on 17 October 1968.

Return to peacetime service

After her stint in Vietnam, Minnetonka returned to peacetime service until her decommissiong a few years later.

A fatal accident occurred on 20 June 1972. One person was killed and two were seriously injured when a hot-water heater exploded while the cutter was in Long Beach.

Decommissioning

Minnetonka was decommissioned on 31 May 1974 and was laid-up at the U.S. Coast Guard Base, Alameda, California until she was scrapped two years later.

Footnotes

  1. ↑ Western Pipe & Steel - San Pedro shipyard Archived 2007-11-15 at the Wayback Machine - Colton Company website
  2. ↑ "USCG Minnetonka" (PDF). U.S. Coast Guard History Program. United States Coast Guard . Retrieved 2012-12-17.
  3. ↑ "USCG Designations". U.S. Coast Guard History Program. United States Coast Guard . Retrieved 2012-12-17.

Related Research Articles

USS <i>Seize</i>

USS Seize (ARS-26) was a Diver-class rescue and salvage ship commissioned in the United States Navy during World War II. Her task was to come to the aid of stricken vessels.

USCGC <i>Owasco</i>

USCG Owasco (WHEC-39) was an Owasco class high endurance cutter which served with the US Coast Guard from 1945 to 1973. Originally intended for World War II service, she was commissioned only weeks before the end of the war and consequently did not see combat until her deployment in the Vietnam War more than 20 years later.

USCGC <i>Winnebago</i>

USCG Winnebago (WHEC-40) was an Owasco-class high endurance cutter which served with the United States Coast Guard from 1945 to 1973. Originally intended for World War II service, she was commissioned only weeks before the end of the war and consequently did not see combat until her deployment in the Vietnam War more than 20 years later.

USCGC <i>Chautauqua</i>

USCG Chautauqua (WHEC-41) was an Owasco-class high endurance cutter which served with the US Coast Guard from 1945 to 1973. Originally intended for World War II service, she was commissioned only days before the end of hostilities and consequently never saw combat.

USCGC <i>Sebago</i> (WHEC-42)

USCG Sebago (WHEC-42) was an Owasco class high endurance cutter which served with the US Coast Guard from 1945 to 1972. Originally intended for World War II service, she was not commissioned until a month after the end of hostilities and consequently did not see combat until her deployment in the Vietnam War more than 20 years later.

USCGC <i>Iroquois</i>

USCGC Iroquois (WHEC-43) was an Owasco-class high-endurance cutter built for World War II service with the United States Coast Guard. The war ended before the ship was completed and consequently she never saw wartime service.

USCGC <i>Wachusett</i> (WHEC-44)

USCGC Wachusett (WHEC-44) was an Owasco-class high endurance cutter built for World War II service with the United States Coast Guard. She was commissioned too late for service in that war and consequently did not see wartime service until the Vietnam War.

USCGC <i>Escanaba</i> (WHEC-64)

USCGC Escanaba (WHEC-64) was an Owasco-class high endurance cutter built for World War II service with the United States Coast Guard. The war ended before the ship was completed and consequently she never saw wartime service.

USCGC <i>Winona</i> United States Coast Guard cutter

USCGC Winona (WHEC-65) was an Owasco class high endurance cutter built for World War II service with the United States Coast Guard. The war ended before the ship was completed and consequently she did not see wartime service until the Vietnam War.

USCGC <i>Klamath</i>

USCGC Klamath (WHEC-66) was an Owasco-class high endurance cutter built for World War II service with the United States Coast Guard. The war ended before the ship was completed and consequently Klamath did not see wartime service until the Vietnam War.

USCGC <i>Androscoggin</i> Former ship of the United States Coast Guard

USCGC Androscoggin (WHEC-68) was an Owasco-class high endurance cutter built for World War II service with the United States Coast Guard. The war ended before the ship was completed and consequently Androscoggin did not see wartime service until the Vietnam War.

USCGC <i>Mendota</i> (WHEC-69) US Coast Guard vessel

USCGC Mendota (WHEC-69) was an Owasco class high endurance cutter built for World War II service with the United States Coast Guard. The ship was commissioned three months before the end of the war and did not see combat action until the Vietnam War.

USCGC <i>Pontchartrain</i> (WHEC-70) US Coast Guard vessel

USCGC Pontchartrain (WHEC-70) was an Owasco class high endurance cutter built for World War II service with the United States Coast Guard. The ship was commissioned just days before the end of the war and thus did not see combat action until the Korean War.

USCGC <i>Point Brown</i> United States Coast Guard Auxiliary patrol boat

USCGC Point Brown (WPB-82362) was an 82-foot (25 m) Point class cutter constructed by J.M. Martinac Shipbuilding Corp. at Tacoma, Washington in 1967 for use as a law enforcement and search and rescue patrol boat.

USCGC Clover WAGL/WLB/WMEC-292, a Cactus (A) Class buoy tender was built by Marine Iron and Shipbuilding, Duluth, Minnesota. Her keel was laid 3 December 1941, and she was launched 25 April 1942. She was commissioned on 8 November 1942 in the United States Coast Guard as the United States Coast Guard Cutter Clover. She was built as a WAGL, redesignated a WLB in 1965, and again redesignated a WMEC in 1979.

USCGC Tupelo WAGL/WLB-303, was a Cactus (A) Class 180-foot buoy tender vessel built by Zenith Dredge Company of Duluth, Minnesota. Her keel was laid 15 August 1942, launched 28 November 1942 and commissioned on 30 August 1943. She was built as a WAGL and redesignated a WLB in 1965.

USCGC Point Swift (WPB-82312) was an 82-foot (25 m) Point-class cutter constructed at the Coast Guard Yard at Curtis Bay, Baltimore in 1961 for use as a law enforcement and search and rescue patrol boat. Since the Coast Guard policy in 1961 was not to name cutters under 100 feet (30 m) in length, it was designated as WPB-82312 when commissioned and acquired the name Point Swift in January 1964 when the Coast Guard started naming all cutters longer than 65 feet (20 m).

USCGC <i>Point Thatcher</i> United States Coast Guard cutter

USCGC Point Thatcher (WPB-82314) was an 82-foot (25 m) Point class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1961 for use as a law enforcement and search and rescue patrol boat. Since the Coast Guard policy in 1961 was not to name cutters under 100 feet (30 m) in length, it was designated as WPB-82314 when commissioned and acquired the name Point Thatcher in January 1964 when the Coast Guard started naming all cutters longer than 65 feet (20 m). Point Thatcher was unique because it was the only cutter that was built in the class that was powered using gas turbine main drive engines.

USCGC <i>Point Chico</i> United States Coast Guard cutter

USCGC Point Chico (WPB-82339) was an 82-foot (25 m) Point class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1962 for use as a law enforcement and search and rescue patrol boat. Since the Coast Guard policy in 1962 was not to name cutters under 100 feet (30 m) in length, it was designated as WPB-82339 when commissioned and acquired the name Point Chico in January 1964 when the Coast Guard started naming all cutters longer than 65 feet (20 m).

USCGC Point Judith (WPB-82345) was an 82-foot (25 m) Point class cutter constructed at the J.M. Martinac Shipbuilding Corp. yards at Tacoma, Washington in 1966 for use as a law enforcement and search and rescue patrol boat.

References

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.