USCGC Nettle (WAK-169) was a United States Coast GuardDesign 381 coastal freighter acquired from the United States Army and was designated as USA FS-396 during World War II army operations. She was transferred to the United States Coast Guard in 1947, and used for servicing aids to navigation and providing logistics support for U.S. Coast Guard manned LORAN stations in the Pacific Ocean.
FS-396 was transferred to the U.S. Coast Guard and on 1 October 1947 was recommissioned as USCGC Nettle (WAK-169) after being refitted for use as an aids to navigation tender. From 1947 to 1952, Nettle hauled supplies and equipment to Kwajalein in the Marshall Islands. Nettle was home-ported at Guam in 1952 and provided logistical support for LORAN stations at Ulithi, Saipan, Cocos, Kwajelein, and Kwadak Island as well as servicing aids to navigation at Tinian and Rota in the Mariana Islands.
While underway from Bataan on 1 September 1958, Nettle spotted and assisted the capsized junk Low Kow Wong How and rescued two of the crew. She was able to right the junk with her deck crane and pump it out, then continued her mission to deliver supplies to Naulo Point.[1] During another search and rescue case on 2 August 1962, she searched the waters in the vicinity of Caballo Island for 29 hours looking for the missing crew of a downed U.S. NavyP5M seaplane with 13 persons aboard; there were no survivors found.[1] During May 1966, Nettle delivered construction materials from Bangkok for a new LORAN station to be located at Con Son Island.[7]Nettle was transferred to Philippine Coast Guard, 9 January 1968 as BRP Limasawa (AE-79).[6]
Notes
Citations
1 2 3 4 5 6 "Nettle, 1947", Cutters, Craft & U.S. Coast Guard Manned Army & Navy Vessels, U.S. Coast Guard Historian's Office
"Nettle, 1947 (WAK-169); ex FS-397"(PDF). Cutters, Craft & U.S. Coast Guard Manned Army & Navy Vessels. U.S. Coast Guard Historian's Office. Retrieved 24 July 2015.
"U.S.Coast Guard Cutter Nicknames"(PDF). U.S. Coast Guard Cutters & Craft Index. U.S. Coast Guard Historian's Office. Retrieved 24 July 2015.
Larzelere, Alex (1997). The Coast Guard at War, Vietnam, 1965-1975. Naval Institute Press, Annapolis. ISBN978-1-55750-529-3.
Scheina, Robert L. (1990). U.S. Coast Guard Cutters & Craft, 1946-1990. Naval Institute Press, Annapolis. ISBN978-0-87021-719-7.
Wertheim, Eric (2007). Naval Institute Guide to Combat Fleets of the World, 15th Edition. Naval Institute Press, Annapolis. ISBN978-1-59114-955-2.
Edwin John Roland, was a United States Coast Guard admiral and served as the twelfth Commandant of the Coast Guard from 1962 to 1966. During his tenure, Roland oversaw the replacement of many World War II era cutters under fleet modernization programs. He also assisted the U.S. Navy with operations in Vietnam by supplying crews and cutters for Operation Market Time. Roland was noted for his support in efforts to bring international safety standards to merchant shipping. Although Roland was already retired when the Coast Guard was transferred from the Department of Treasury to the newly formed Department of Transportation in 1967, he was largely responsible for the planning for the move and the Coast Guard retaining its military responsibilities along with its transportation related functions.
Joseph Francis Farley served as the ninth Commandant of the United States Coast Guard from 1946 to 1949. He was also the first Coast Guard officer to be issued a service number and held #1000 on the Coast Guard officer rolls.
USCGC Spar (WLB-403) was a 180-foot (55 m) sea going buoy tender. An Iris class vessel, she was built by Marine Ironworks and Shipbuilding Corporation in Duluth, Minnesota. Spar's preliminary design was completed by the United States Lighthouse Service and the final design was produced by Marine Iron and Shipbuilding. On 13 September 1943 the keel was laid, she was launched on 2 November 1943 and commissioned on 12 June 1944. The original cost for the hull and machinery was $865,941.
USCGC Tallapoosa (WPG-52) was a United States Coast Guard cutter of the Tallapoosa-class and was designed to replace the revenue cutter Winona. Her hull was reinforced for light icebreaking. She was initially stationed at Mobile, Alabama, with cruising grounds to Lake Pontchartrain, Louisiana, and Fowey Rocks, Florida. During World War I she escorted convoys out of Halifax, Nova Scotia. After the war she served with the Bering Sea Patrol before returning to Savannah, Georgia, before World War II. During the war Tallapoosa assisted with convoy escort duty and anti-submarine patrols.
USCGC Cape Henlopen was a 95-foot (29 m) type "C" Cape-class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1958 for use as a law enforcement and search and rescue patrol boat.
USCGC Point Clear (WPB-82315) was an 82-foot (25 m) Point class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1961 for use as a law enforcement and search and rescue patrol boat. Since the Coast Guard policy in 1960 was not to name cutters under 100 feet (30 m) in length, it was designated as WPB-82315 when commissioned and acquired the name Point Clear in January 1964 when the Coast Guard started naming all cutters longer than 65 feet (20 m).
USCGC Point Glover (WPB-82307) was an 82-foot (25 m) Point class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1960 for use as a law enforcement and search and rescue patrol boat. Since the Coast Guard policy in 1960 was not to name cutters under 100 feet (30 m) in length, it was designated as WPB-82307 when commissioned and acquired the name Point Glover in January 1964 when the Coast Guard started naming all cutters longer than 65 feet (20 m).
USCGC Point Mast (WPB-82316) was an 82-foot (25 m) Point class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1961 for use as a law enforcement and search and rescue patrol boat. Since the Coast Guard policy in 1961 was not to name cutters under 100 feet (30 m) in length, it was designated as WPB-82316 when commissioned and acquired the name Point Mast in January 1964 when the Coast Guard started naming all cutters longer than 65 feet (20 m).
USCGC Point Caution (WPB-82301) was the first 82-foot (25 m) USCG Point class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland. She was built and commissioned in 1960 for use as a law enforcement and search and rescue patrol boat. Since the Coast Guard policy in 1960 was not to name cutters under 100 feet (30 m) in length it was designated as WPB-82301 when commissioned and acquired the name Point Caution in January 1964 when the Coast Guard started naming all cutters longer than 65-foot (20 m).
USCGC Point Dume (WPB-82325) was an 82-foot (25 m) Point class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1961 for use as a law enforcement and search and rescue patrol boat. Since the Coast Guard policy in 1961 was not to name cutters under 100 feet (30 m) in length, it was designated as WPB-82325 when commissioned and acquired the name Point Dume in January 1964 when the Coast Guard started naming all cutters longer than 65-foot (20 m).
USCGC Point Ellis (WPB-82330) was an 82-foot (25 m) Point class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1962 for use as a law enforcement and search and rescue patrol boat. Since the Coast Guard policy in 1962 was not to name cutters under 100 feet (30 m) in length, it was designated as WPB-82330 when commissioned and acquired the name Point Ellis in January 1964 when the Coast Guard started naming all cutters longer than 65 feet (20 m).
USCGC Point Grace (WPB-82323) was an 82-foot (25 m) Point class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1961 for use as a law enforcement and search and rescue patrol boat. Since the Coast Guard policy in 1961 was not to name cutters under 100-foot (30 m) in length, it was designated as WPB-82323 when commissioned and acquired the name Point Grace in January 1964 when the Coast Guard started naming all cutters longer than 65-foot (20 m).
USCGC Point Lomas (WPB-82321) was an 82-foot (25 m) Point class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1961 for use as a law enforcement and search and rescue patrol boat. Since the Coast Guard policy in 1961 was not to name cutters under 100 feet (30 m) in length, it was designated as WPB-82321 when commissioned and acquired the name Point Lomas in January 1964 when the Coast Guard started naming all cutters longer than 65-foot (20 m).
USCGC Point Cypress (WPB-82326) was an 82-foot (25 m) Point-class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1961 for use as a law enforcement and search and rescue patrol boat. Since the Coast Guard policy in 1961 was not to name cutters under 100-foot (30 m) in length, it was designated as WPB-82326 when commissioned and acquired the name Point Cypress in January 1964 when the Coast Guard started naming all cutters longer than 65-foot (20 m).
USCGC Point Hudson (WPB-82322) was an 82-foot (25 m) Point class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1961 for use as a law enforcement and search and rescue patrol boat. Since the Coast Guard policy in 1961 was not to name cutters under 100-foot (30 m) in length, it was designated as WPB-82322 when commissioned and acquired the name Point Hudson in January 1964 when the Coast Guard started naming all cutters longer than 65-foot (20 m).
USCGC Point Jefferson (WPB-82306) was an 82-foot (25 m) Point class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1960 for use as a law enforcement and search and rescue patrol boat. Since the Coast Guard policy in 1960 was not to name cutters under 100 feet (30 m) in length, it was designated as WPB-82306 when commissioned and acquired the name Point Jefferson in January 1964 when the Coast Guard started naming all cutters longer than 65-foot (20 m).
USCGC Point Slocum (WPB-82313) was an 82-foot (25 m) Point class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1961 for use as a law enforcement and search and rescue patrol boat. Since the Coast Guard policy in 1960 was not to name cutters under 100-foot (30 m) in length, it was designated as WPB-82313 when commissioned and acquired the name Point Slocum in January 1964 when the Coast Guard started naming all cutters longer than 65-foot (20 m).
USCGC Crawford (WSC-134), was a 125 ft (38 m) United States Coast Guard Active-class patrol boat in commission from 1927 to 1947. She was named for William H. Crawford, (1772–1834) who was appointed in 1816 as Secretary of the Treasury by President James Madison and he continued under President James Monroe through 1825. Crawford was the seventh vessel commissioned by the U.S. Revenue Cutter Service and the Coast Guard named after the former secretary. She served during the Rum Patrol and World War II performing defense, law enforcement, ice patrol, and search and rescue missions.
USCGC Aspen (WLB-208) is the eighth cutter in the Juniper-class 225 ft (69 m) of seagoing buoy tenders. She is under the operational control of the Commander of the Seventeenth U.S. Coast Guard District and is home-ported in Homer, Alaska. Her primary responsibility areas are Kachemak Bay of Cook Inlet to the Kuskokwim River in southwest Alaska and the high seas off south-central and southwest Alaska. Aspen conducts heavy lift aids-to-navigation operations, and law enforcement, homeland security, environmental pollution response, and search and rescue as directed.
USCGC Cape Cross was a 95-foot (29 m) type "C" Cape-class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1958 for use as a law enforcement and search and rescue patrol boat.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
United States
