USCGC Winona

	USCGC Winona (WHEC-65), circa 1965
History
United States
Owner	US Coast Guard
Builder	Western Pipe & Steel
Cost	$4,239,702 (hull and machinery)
Laid down	8 November 1944
Launched	22 April 1945
Christened	Winona
Commissioned	19 April 1946
Decommissioned	31 May 1974
Reclassified	WPG-65 to WHEC-65
Fate	Scrapped, 1974
Notes	WPS Hull No. 152.
General characteristics
Type	Owasco-class cutter
Displacement	1,978 full (1966); 1,342 light (1966);
Length	254 ft (77.4 m) oa.; 245 ft (74.7 m) pp.;
Beam	43 ft 1 in (13.1 m)
Draft	17 ft 3 in (5.3 m) (1966)
Installed power	4,000 shp (3,000 kW) (1945)
Propulsion	1 x Westinghouse electric motor driven by a turbine, (1945)
Speed	17 knots (31 km/h; 20 mph).
Range	6,157 mi (9,909 km) at 17 knots; 10,376 mi (16,699 km) at 10 knots (19 km/h; 12 mph) (1966);
Complement	10 officers, 3 warrants, 130 enlisted (1966)
Sensors and ; processing systems	Detection Radar: SPS-23, SPS-29, Mk 26, Mk 27 (1966); Sonar: SQS-1 (1966);
Armament	1945: ; 2 x twin 5 in/38 cal. dual purpose gun mounts; 2 x quad 40 mm AA gun mounts; 2 x depth charge tracks; 6 x "K" gun depth charge projectors; 1 x Hedgehog projector.; 1966: ; 1 x 5 in/38 cal. dual purpose gun mount; 1 x Hedgehog projector;
Notes	Fuel capacity: 141,755 gal (Oil, 95%).

Last updated September 24, 2023

USCGC Winona (WHEC-65) was an Owasco class high endurance cutter built for World War II service with the United States Coast Guard. The war ended before the ship was completed and consequently she did not see wartime service until the Vietnam War.

Winona was built by Western Pipe & Steel at the company's San Pedro shipyard. Named after Winona Lake, Indiana, she was commissioned as a patrol gunboat with ID number WPG-65 on 19 April 1946. Her ID was later changed to WHEC-65 (HEC for "High Endurance Cutter" - the "W" signifies a Coast Guard vessel)^[3]^[4]

Peacetime service

From 15 August 1946 to 11 September 1947, Winona was stationed at San Pedro, California, and used for law enforcement, ocean station, and search and rescue operations. She was subsequently homeported at Port Angeles, Washington until 31 May 1974.^[5]

On 17 November 1948, she towed the disabled MV Herald of Morning. On 10 June 1949, she assisted FV Alice B 2 miles off South Amphitrite Point. On 13 February 1950, she towed the disabled MV Edgecombe to Seattle, Washington. On 16 June 1951, she escorted FV Sea Lark to Ketchikan, Alaska. On 18 and 19 March 1952, she assisted the disabled MV Darton until relieved by a commercial tug. From 23 to 25 December 1952, she assisted MV Maple Cove at 48°22’N, 134°26’W. On 13 February 1954, she assisted FV Western Fisherman. On 20 December 1954, she medevaced a crewman from MV General Pope. She patrolled the Gold Cup Races at Seattle, Washington, on 7 August 1955. Winona served on Bering Sea patrol from July to September 1956. She was back performing that same task from 20 July to 21 September 1963.^[5]

Vietnam War

Winona was assigned to Coast Guard Squadron Three, South Vietnam, from 25 January to 17 October 1968.^[5] On 1 March the Winona sank a North Vietnamese trawler designated T-A. Damage controlman first class Thomas Lisk was on board at the time, and reported that a round penetrated the hull and bounce repeatedly around the room but fortunately neither he nor any shipmates were injured.

Return to peacetime duties

On 31 January 1969, Winona stood by MV Belmona following a fire 15 miles southwest of Cape Flattery until commercial tugs arrived. On 20 July 1969, she assisted in the operations following the sinking of a barge loaded with diesel fuel near Admiralty Inlet. On 28 October 1970, she provided medical assistance to Urea Maru 300 miles off San Francisco.^[5]

Decommissioning

The ship was decommissioned on 31 May 1974 and was laid-up at the US Coast Guard Base, Alameda, California until she was scrapped in late 1976.

Footnotes

1 2 3 4 5 Scheina (1982), pp 1–3
↑ Western Pipe & Steel - San Pedro shipyard Archived 2007-11-15 at the Wayback Machine - Colton Company website
↑ "Winona, 1946" (PDF). Cutters, Craft & U.S. Coast Guard-Manned Army & Navy Vessels. US Coast Guard Historians Office. Retrieved 19 December 2012.
↑ "USCG Designations". U.S. Coast Guard History Program. US Coast Guard Historians Office. Retrieved 2012-12-17.
1 2 3 4 Scheina (1990), pp 25–26

Related Research Articles

USCG Winnebago (WHEC-40) was an Owasco-class high endurance cutter which served with the United States Coast Guard from 1945 to 1973. Originally intended for World War II service, she was commissioned only weeks before the end of the war and consequently did not see combat until her deployment in the Vietnam War more than 20 years later.

USCG Chautauqua (WHEC-41) was an Owasco-class high endurance cutter which served with the US Coast Guard from 1945 to 1973. Originally intended for World War II service, she was commissioned only days before the end of hostilities and consequently never saw combat.

USCG Sebago (WHEC-42) was an Owasco class high endurance cutter which served with the US Coast Guard from 1945 to 1972. Originally intended for World War II service, she was not commissioned until a month after the end of hostilities and consequently did not see combat until her deployment in the Vietnam War more than 20 years later.

USCGC Wachusett (WHEC-44) was an Owasco-class high endurance cutter built for World War II service with the United States Coast Guard. She was commissioned too late for service in that war and consequently did not see wartime service until the Vietnam War.

USCGC Escanaba (WHEC-64) was an Owasco-class high endurance cutter built for World War II service with the United States Coast Guard. The war ended before the ship was completed and consequently she never saw wartime service.

USCGC Klamath (WHEC-66) was an Owasco-class high endurance cutter built for World War II service with the United States Coast Guard. The war ended before the ship was completed and consequently Klamath did not see wartime service until the Vietnam War.

USCGC Minnetonka (WHEC-67) was an Owasco class high endurance cutter built for World War II service with the United States Coast Guard. The war ended before the ship was completed and consequently Minnetonka did not see wartime service until the Vietnam war.

USCGC Androscoggin (WHEC-68) was an Owasco-class high endurance cutter built for World War II service with the United States Coast Guard. The war ended before the ship was completed and consequently Androscoggin did not see wartime service until the Vietnam war.

USCGC Mendota (WHEC-69) was an Owasco class high endurance cutter built for World War II service with the United States Coast Guard. The ship was commissioned three months before the end of the war and did not see combat action until the Vietnam war.

USCGC Pontchartrain (WHEC-70) was an Owasco class high endurance cutter built for World War II service with the United States Coast Guard. The ship was commissioned just days before the end of the war and thus did not see combat action until the Korean war.

USCGC Raritan (WYT-93/WYTM-93) was a United States Coast Guard 110 ft (34 m) harbor tug that was in service from 1939 to 1988. She served on the Greenland Patrol during World War II and after the war on the Great Lakes. From 1980 until decommissioning she was homeported at Governors Island.

USCGC Point Countess (WPB-82335) was an 82-foot (25 m) Point class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1962 for use as a law enforcement and search and rescue patrol boat. Since the Coast Guard policy in 1962 was not to name cutters under 100 feet (30 m) in length, it was designated as WPB-82335 when commissioned and acquired the name Point Countess in January 1964 when the Coast Guard started naming all cutters longer than 65 feet (20 m).

USCGC Point Brown (WPB-82362) was an 82-foot (25 m) Point class cutter constructed by J.M. Martinac Shipbuilding Corp. at Tacoma, Washington in 1967 for use as a law enforcement and search and rescue patrol boat.

USCGC Clover WAGL/WLB/WMEC-292, a Cactus (A) Class buoy tender was built by Marine Iron and Shipbuilding, Duluth, Minnesota. Her keel was laid 3 December 1941, and she was launched 25 April 1942. She was commissioned on 8 November 1942 in the United States Coast Guard as the United States Coast Guard Cutter Clover. She was built as a WAGL, redesignated a WLB in 1965, and again redesignated a WMEC in 1979.

USCGC Tupelo WAGL/WLB-303, was a Cactus (A) Class 180-foot buoy tender vessel built by Zenith Dredge Company of Duluth, Minnesota. Her keel was laid 15 August 1942, launched 28 November 1942 and commissioned on 30 August 1943. She was built as a WAGL and redesignated a WLB in 1965.

USCGC Point Verde (WPB-82311) was an 82-foot (25 m) Point class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1961 for use as a law enforcement and search and rescue patrol boat. Since the Coast Guard policy in 1961 was not to name cutters under 100 feet (30 m) in length, it was designated as WPB-82311 when commissioned and acquired the name Point Verde in January 1964 when the Coast Guard started naming all cutters longer than 65 feet (20 m).

USCGC Point Swift (WPB-82312) was an 82-foot (25 m) Point-class cutter constructed at the Coast Guard Yard at Curtis Bay, Baltimore in 1961 for use as a law enforcement and search and rescue patrol boat. Since the Coast Guard policy in 1961 was not to name cutters under 100 feet (30 m) in length, it was designated as WPB-82312 when commissioned and acquired the name Point Swift in January 1964 when the Coast Guard started naming all cutters longer than 65 feet (20 m).

USCGC General Greene (WPC/WSC/WMEC-140), was a 125 ft (38 m) United States Coast Guard Active-class patrol boat, in commission from 1927 to 1968 and the fourth cutter to bear the name of the famous Revolutionary War general, Nathanael Greene. She served during the Rum Patrol, World War II and into the 1960s performing defense, law enforcement, ice patrol, and search and rescue missions.

USCGC Point Judith (WPB-82345) was an 82-foot (25 m) Point class cutter constructed at the J.M. Martinac Shipbuilding Corp. yards at Tacoma, Washington in 1966 for use as a law enforcement and search and rescue patrol boat.

USCGC Point Franklin (WPB-82350) was an 82-foot (25 m) Point class cutter constructed at the J.M. Martinac Shipbuilding Corp. yards at Tacoma, Washington in 1966 for use as a law enforcement and search and rescue patrol boat.

References

Scheina, Robert L. (1990). U.S. Coast Guard Cutters & Craft, 1946–1990. Naval Institute Press, Annapolis. ISBN 978-0-87021-719-7.
Scheina, Robert L. (1982). U.S. Coast Guard Cutters & Craft of World War II. Annapolis: United States Naval Institute. p. 331. ISBN 978-0-87021-717-3.
"Winona, 1946" (PDF). Cutters, Craft & U.S. Coast Guard-Manned Army & Navy Vessels. US Coast Guard Historians Office. Retrieved 19 December 2012.

v t e Owasco-class cutters
Owasco Winnebago Chautauqua Wachusett / Sebago Iroquois Huron / Wachusett Otsego / Escanaba Winona Klamath Minnetonka Androscoggin Mendota Okeechobee / Pontchartrain
Preceded by: Wind class Followed by: USCGC Eagle
List of cutters of the United States Coast Guard