USRC Woodbury (1837)

Last updated
History
Ensign of the United States Coast Guard.svgUnited States
Name:USRC Woodbury
Namesake: Associate Justice Levi Woodbury
Operator:
Port of registry: United States
Builder: L. H. Duncan (Baltimore, Md)
Cost: $11,250
Laid down: 7 February 1837
Launched: 27 March 1837
Christened:Woodbury
Commissioned: 8 November 1836
Decommissioned: 14 September 1846
Out of service: 1 June 1847
Homeport: New Orleans, Louisiana
Fate: Sold and broken up
General characteristics
Tonnage: 120
Installed power: sail
Sail plan: Topsail schooner
Speed: unknown
Complement: officers, 15 enlisted, 4 boys
Armament: four 12-pounders and one 6-pounder

USRC Woodbury, also referred to as Levi Woodbury, the first marine cutter to bear the name, was a schooner-rigged revenue cutter built for the United States Revenue Cutter Service. Woodbury was authorized on 8 November 1836, and Revenue-Marine Captain H. D. Hunter was assigned to supervise construction. Woodbury was built at Baltimore, Md, by L. H. Duncan, and was launched on 27 March 1837. The cutter was a 120-ton topsail schooner mounted with four 12-pound and one 6-pound cannon. [1]

After being made ready for sea. Woodbury set sail for New Orleans to relieve the revenue cutter Campbell in Gulf of Mexico patrols. By 28 March 1838, Woodbury was operating in the Gulf of Mexico in cooperation with the United States Navy. Orders from the Collector of Customs at New Orleans to the Woodbury commanding officer, "You will proceed to sea forthwith, taking your cruising ground from Chandalier Islands to the mouth of the Sabine River, and in the event of any vessel sailing under our flag, being in your presence unlawfully attacked, by an armed force, you will render such aid and protection as may be in your power." . The ship was damaged by a French warship and was allowed to go to Veracruz, Mexico for repairs, was detained, and was there to witness the French bombardment of the fortress at San Juan de Ulua and the surrender. Released 29 November 1838, Woodbury sailed for New Orleans where she was refitted to resume patrolling the Gulf of Mexico. Ordered to Baltimore the Woodbury arrived there 26 August 1839, and after refitting departed for New Orleans 23 September 1839, for continued patrols also running dispatch during the war with Mexico. On Feb. 17, 1845, the Republic of Texas cutter Santa Anna ordered 2 schooners loading cotton to stop at Sabine Pass and pay tonnage fees and waited at the custom's house. When the schooners began sailing through the pass they were escorted by Woodbury and was allowed to pass without incident. [2] On 2 March 1846, Woodbury arrived at Aransas Pass, Texas. Captain Winslow Foster placed his ship at the disposal of General Zachary Taylor and escorted transports moving troops to Point Isabel. [3] After more than ten years of service, Woodbury was decommissioned on 14 September 1846 and sold on 1 June 1847.

Related Research Articles

United States Revenue Cutter Service Precursor to the U.S. Coast Guard

The United States Revenue Cutter Service was established by an act of Congress on 4 August 1790 as the Revenue-Marine upon the recommendation of Secretary of the Treasury Alexander Hamilton to serve as an armed customs enforcement service. As time passed, the service gradually gained missions either voluntarily or by legislation, including those of a military nature. It was generally referred to as the Revenue-Marine until 31 July 1894, when it was officially renamed the Revenue Cutter Service.

Sabine Pass, Port Arthur, Texas human settlement in Texas, United States of America

Sabine Pass is a neighborhood in Port Arthur, Texas. It lies at Sabine Pass, on the west bank of the Sabine River, the border between Louisiana and Texas, and was incorporated in 1861. Formally annexed by Port Arthur in 1978, Sabine Pass has its own school district, post office, water district, and port authority. Police and fire protection is provided by the Port Arthur city government. The Port Arthur Convention and Visitors Bureau stated that Sabine Pass is "often regarded as" being a "self-contained" community.

USS <i>Windom</i> (1896)

USRC Windom was a revenue cutter, which served in the United States Navy and was later named Comanche. She was named for William Windom.

<i>Washington</i> (1837)

Washington was a revenue cutter that served in the United States Revenue Cutter Service and in the United States Navy. She discovered, boarded and captured La Amistad after the slaves onboard had seized control of that schooner in an 1839 mutiny.

The Texas schooner Invincible was one of the four schooners of the Revolutionary Texas Navy (1836-1837). She began her service in January 1836 and immediately began attacking ships supplying the Mexican army in Texas, including capturing the United States merchant vessel Pocket and later the British ship Eliza Russell. Both of these actions caused diplomatic incidents between the Republic of Texas and the United States and the United Kingdom.

The Texan schooner Independence was one of the four schooners of the First Texas Navy (1836–1838). At the direction of Texas Governor Henry Smith, in 1836 Charles Hawkins took command of United States revenue cutter Ingham acquired by the Texas Navy and renamed Independence.

USS <i>Delaware</i> (1861) steamer acquired by the Union Navy for use during the American Civil War

USS Delaware (1861) was a steamer acquired by the Union Navy for use during the American Civil War. She had a very active naval career as a gunboat for over three years, and after the war served as a revenue cutter for over 37 years. The steamer was sold to the private sector in 1909, and disappeared from shipping registers in 1919.

USRC <i>Morris</i> (1831)

The United States Revenue Cutter Morris was one of 13 cutters of the Morris-Taney Class to be launched. Named after Secretaries of the Treasury and Presidents of the United States, these cutters were the backbone of the Service for more than a decade. Samuel Humphreys designed these cutters for roles as diverse as fighting pirates, privateers, combating smugglers and operating with naval forces. He designed the vessels on a naval schooner concept. They had Baltimore Clipper lines. The vessels built by Webb and Allen, designed by Isaac Webb, resembled Humphreys' but had one less port.

USRC <i>Jackson</i> (1832)

The United States Revenue Cutter Jackson was one of 13 cutters of the Morris-Taney Class to be launched. Named after Secretaries of the Treasury and Presidents of the United States, these cutters were the backbone of the Revenue Cutter Service for more than a decade. Samuel Humphreys designed these cutters for roles as diverse as fighting pirates, privateers, combating smugglers and operating with naval forces. He designed the vessels on a naval schooner concept. They had Baltimore Clipper lines. The vessels built by Webb and Allen, designed by Isaac Webb, resembled Humphreys' but had one less port.

USRC <i>McLane</i> (1832)

The United States Revenue Cutter McLane was one of 13 cutters of the Morris-Taney Class to be launched. Named after Secretaries of the Treasury and Presidents of the United States, these cutters were the backbone of the Service for more than a decade. Samuel Humphreys designed these cutters for roles as diverse as fighting pirates, privateers, combating smugglers and operating with naval forces. He designed the vessels on a naval schooner concept. They had Baltimore Clipper lines. The vessels built by Webb and Allen, designed by Isaac Webb, resembled Humphreys' but had one less port.

USRC Walter Forward was a schooner constructed for service with the United States Revenue Marine. She was more commonly known as USRC Forward. Forward served with the U.S. Army and U.S. Navy in Mexican waters during the Mexican–American War and was commended for her actions during the Tabasco River landings by Commodore Matthew C. Perry, U.S. Navy. After the war, she was transferred to the U.S. Coast Survey for a short time as USCS Walter Forward before being returned to the Revenue Marine for service during the 1850s and the American Civil War.

USRC <i>Levi Woodbury</i>

USRC Levi Woodbury was a Pawtuxet-class screw steam revenue cutter built for the United States Revenue Cutter Service during the American Civil War. Built in 1863–64, she became one of the longest-serving revenue cutters in the Service's history, and was the oldest active-duty ship in U.S. government service by the end of her 51-year career.

Texan schooner <i>San Antonio</i>

The Texan schooner San Antonio was a two-masted schooner of the Second Texas Navy from 1839-1840. She was the sister ship of the San Jacinto and the San Bernard. In 1840, San Antonio was part of the Texas Navy flotilla led by Commodore Edwin Ward Moore which was dispatched to assist Yucatecan rebels that had taken up arms against Mexico. In February 1842, while re-provisioning in New Orleans, the crew of the San Antonio mutinied and the Lieutenant was killed. This was the only mutiny in the history of the Texas Navy. That fall, the San Antonio sailed for Campeche and was never heard from again.

USRC <i>Manning</i> (1898)

USRC Manning was a revenue cutter of the United States Revenue Cutter Service that served from 1898 to 1930, and saw service in the U.S. Navy in the Spanish–American War and World War I.

USS Van Buren was a schooner that served as part of the United States Revenue Cutter Service. The ship was named after Martin Van Buren, the eighth president of the U.S. The ship was commissioned and set sail on 2 December 1839, and served a regular tour of duty with the Revenue Service. During the Second Seminole War, the ship was transferred to the United States Navy, and served as a support ship to troops along the coasts of Florida's rivers.

The Capture of the schooner Bravo was a naval battle between United States Revenue Cutter Service cutters and one of Jean Lafitte's pirate ships.

USRC <i>Louisiana</i> (1819)

USRC Louisiana, was a wood hull topsail schooner designed by William Doughty that was commissioned in the United States Revenue Marine from 1819 to 1824. Assigned the homeport of New Orleans, Louisiana, she sailed the Caribbean extensively and was used mainly in anti-piracy activity.

USRC Kewanee was a Pawtuxet-class screw steam revenue cutter built for the United States Revenue Marine during the American Civil War.

<i>Ingham</i> incident

The Ingham Incident, or the Montezuma Affair, was a naval battle fought in 1835, the first between Mexico and the United States. The Mexican warship Montezuma patrolled the coast of Texas to prevent the smuggling of contraband into the territory. During the cruise, the Mexicans captured the American merchant ship Martha and later the Texan ship Columbia which led to a response by the United States Revenue-Marine revenue cutter USRC Ingham. A bloodless engagement was fought on June 14, and ended when the Montezuma was purposely run aground to prevent capture.

Texian Navy

The Texian Navy, also known as the Revolutionary Navy and First Texas Navy, was the naval warfare branch of the Texian armed forces during the Texas Revolution. It was established by the Consultation of the Republic of Texas on November 25, 1835. Along with the Texian Army, it helped the Republic of Texas win independence from the Centralist Republic of Mexico on May 14, 1836 at the Treaties of Velasco. It was replaced by the Texas Navy on March 23, 1839.

References

  1. USCG history- Retrieved 2013-09-14
  2. Incident between the Santa Anna and the Woodbury- Retrieved 2013-09-13
  3. USRC Woodbury; Navy history- Retrieved 2013-09-13