RV-10 | |
---|---|
General information | |
Type | Homebuilt aircraft |
National origin | United States |
Manufacturer | Van's Aircraft |
Designer | |
Number built | 1,010 (November 2022) [1] |
History | |
Introduction date | 2003 |
First flight | 29 May 2003 [2] |
Developed from | Van's Aircraft RV-7 |
Variants | Van's Aircraft RV-14 |
The Van's Aircraft RV-10 is a four-seat, single-engine, low-wing homebuilt airplane sold in kit form by Van's Aircraft. It is the first four-seat airplane in the popular RV series. [3] The RV-10 first flew on 29 May 2003, and the first kit parts were delivered to a customer in September 2003.
As of November 2022, 1,010 RV-10s have been completed and flown. [1]
The architect of the line of Van's aircraft, Richard VanGrunsven, designed the RV-10 to satisfy a market demand for a four-seat version of the popular RV series aircraft. [2] The RV-10 was designed from the start as a touring aircraft and as such it forgoes the aerobatic capabilities and the lighter handling common to the aircraft in the RV line from the RV-3 to RV-8. Instead the RV-10 design focuses on greater stability and payload. [4]
The design power is 210 to 260 hp (157 to 194 kW) and the prototype was flown with a Lycoming IO-540 powerplant of 260 hp (194 kW), which is the maximum that the airframe was designed to accept. [5] When Van's introduced the RV-10 they planned three engine configurations. One configuration using a smaller lighter 210 HP Continental IO-360ES, and two others using the larger 235 and 260HP Lycoming I/O-540. The #1 factory demonstrator used the IO-540, while the #2 RV-10 used the Continental IO-360. Vans decided to discontinue the support for the Continental engine after a poll which indicated that most builders would install the Lycoming engine, [6] although this poses problems for builders in certain countries with engine displacement limitations, in which the Continental's 360 cubic inch displacement would be acceptable. [7]
This is the first aircraft in the RV line that does not have a hinged or sliding canopy. VanGrunsven instead opted for two gull-winged doors to provide access to the four seats.
This design has benefited from many of the production changes that were pioneered with the RV-7, RV-8 and the RV-9. Like those aircraft, the RV-10 uses computer assisted design to produce a kit with pre-drilled rivet holes, thus greatly reducing assembly time for the builder. The RV-10 is available only as a tricycle landing gear version and no tailwheel or retractable landing gear versions are planned.
The aircraft is constructed of aluminum with the cabin structure and gull-winged doors made from composite materials. The landing gear is tubular steel with the nosewheel mounting tube welded to the engine mount. As in all nose-wheel equipped RV aircraft, the nosewheel is free castering and the aircraft is steered with differential braking. The brakes are mounted conventionally on the rudder pedal toes.
The amount of time and effort required to build the airplane can vary greatly, but Vans claims that the average first-time builder can complete it in 2,000 hours. [5]
In February 2019 BRS Aerospace released a kit to install a ballistic parachute on the RV-10. The kit can be installed on a completed RV-10 or one under construction. The parachute takes up one third of the aircraft's baggage bay and weighs 82 lb (37 kg). [8]
Data from Manufacturer [12]
General characteristics
Performance
Related development
Aircraft of comparable role, configuration, and era
The Barrows Bearhawk, now also called the Bearhawk 4-Place, is an American amateur-built aircraft, designed by Bob Barrows and produced by R&B Aircraft of Fincastle, Virginia, AviPro Aircraft and now Bearhawk Aircraft of Austin, Texas. The aircraft is supplied as a kit or as plans for amateur construction.
The Thorp T-18 is an American, two-place, all-metal, plans-built, homebuilt aircraft designed in 1963 by John Thorp.
The Van's RV-4 is an American light homebuilt aircraft supplied in kit form by Van's Aircraft of Aurora, Oregon. It seats two people in a tandem seating configuration with the pilot accommodated in the front seat.
The Velocity XL is an American amateur-built aircraft, produced by Velocity, Inc. It is an enlarged version of their Velocity SE canard pusher design.
The Van's RV-7 and RV-7A are two-seat, single-engine, low-wing homebuilt airplanes sold in kit form by Van's Aircraft. The RV-7 is the tail-wheel equipped version, while the RV-7A features a nose-wheel.
The Van's RV-8 is a tandem two-seat, single-engine, low-wing homebuilt aircraft sold in kit form by Van's Aircraft. The RV-8 is equipped with conventional landing gear, while the RV-8A version features tricycle landing gear. The design is similar to the earlier RV-4, although it is larger than that earlier model.
The Van's RV-9 and RV-9A are American two-seat, single-engine, low-wing homebuilt airplanes sold in kit form by Van's Aircraft of Aurora, Oregon. The RV-9 is the tail-wheel equipped version while the RV-9A features a nose-wheel.
The Van's RV-3 is a single-seat, single-engine, low-wing kit aircraft sold by Van's Aircraft. Unlike many other aircraft in the RV line, the RV-3 is only available as a tail-wheel equipped aircraft, although it is possible that some may have been completed by builders as nose-wheel versions. The RV-3 is the genesis design for the rest of the RV series, all which strongly resemble the RV-3. The RV-4 was originally developed as a two-seat RV-3.
The Van's RV-12 is an American two-seat, single-engine, low-wing homebuilt airplane eligible for the U.S. E-LSA category, sold in kit form and as a complete ready-to-fly aircraft by Van's Aircraft of Aurora, Oregon.
The Lancair ES is an American amateur-built aircraft that was designed and produced by Lancair. While it was in production the aircraft was supplied as a kit for amateur construction.
The Lancair Legacy, a modernized version of the Lancair 320, is a low-wing two-place retractable-gear composite monoplane manufactured by the American company Lancair. It is available as a kit that cost US$71,500 in 2011. There is also a fixed-gear version, the Legacy FG. The retractable version of the Legacy cruises at 276 mph at 8,000 ft and the fixed gear version cruises at 215 mph.
The Pipistrel Panthera is a lightweight, all-composite, highly efficient four-seat aircraft under development by Pipistrel of Slovenia.
The Team Rocket F1 Rocket is a two-seat sport plane formerly built in Czech Republic and marketed as a kit for amateur construction by Team Rocket of Texas, United States. As of April 2017, the aircraft is being produced in the U.S. under license from Team Rocket by Frazier Aviation Products LLC of Indiana.
The RV-1 is a Stits Playboy that was constructed with modifications by Richard VanGrunsven. The aircraft was the first of a series of Van's aircraft that became the most popular homebuilt aircraft produced.
The Van's Aircraft RV-14 is an American aerobatic kit aircraft designed by Richard VanGrunsven and produced by Van's Aircraft. It was introduced at AirVenture in July 2012. The aircraft is supplied as a kit for amateur construction.
The CubCrafters Carbon Cub EX is an American amateur-built aircraft, designed and produced by Cub Crafters of Yakima, Washington. The aircraft is supplied as a kit for amateur construction.
The Ravin 500 is a South African amateur-built aircraft, designed and produced by Ravin Aircraft of Pretoria. The aircraft first flew on 15 September 2002 and is supplied as a kit for amateur construction or as a complete ready-to-fly aircraft.
The World Aircraft Spirit is a Colombian/American amateur-built aircraft, designed by Max Tedesco and produced by World Aircraft Company. The aircraft was publicly introduced at AirVenture in 2011 and production is expected to commence in 2014. It is supplied as a kit for amateur construction or as a complete ready-to-fly aircraft.
The ARV Griffin is a Canadian homebuilt aircraft that was designed by Dave Marsden of the University of Alberta and produced by Canada Air RV and later by AC Millennium Corp, both of Edmonton. When it was available the aircraft was supplied as a kit for amateur construction.
The CubCrafters CC19 XCub is an American light aircraft, designed and produced by Cub Crafters of Yakima, Washington, introduced in June 2016. The aircraft is supplied complete and ready-to-fly.