Van's Aircraft RV-10

Last updated

RV-10
RV-10 inflight.jpg
General information
Type Homebuilt aircraft
National originUnited States
Manufacturer Van's Aircraft
Designer
Number built1,010 (November 2022) [1]
History
Introduction date2003
First flight29 May 2003 [2]
Developed from Van's Aircraft RV-7
Variants Van's Aircraft RV-14
Construction of an RV-10 wing in a garage RV-10-Construction.jpg
Construction of an RV-10 wing in a garage
An RV-10 at the Van's Aircraft display at Sun n Fun 2006 in Lakeland Florida VansRV-10N104CD.jpg
An RV-10 at the Van's Aircraft display at Sun n Fun 2006 in Lakeland Florida
RV10 at EAA Airventure 2014 RV10.jpg
RV10 at EAA Airventure 2014
RV-10 landing RV-10 Landing on a Grass Strip in the UK.jpg
RV-10 landing

The Van's Aircraft RV-10 is a four-seat, single-engine, low-wing homebuilt airplane sold in kit form by Van's Aircraft. It is the first four-seat airplane in the popular RV series. [3] The RV-10 first flew on 29 May 2003, and the first kit parts were delivered to a customer in September 2003.

Contents

As of November 2022, 1,010 RV-10s have been completed and flown. [1]

Design and development

The architect of the line of Van's aircraft, Richard VanGrunsven, designed the RV-10 to satisfy a market demand for a four-seat version of the popular RV series aircraft. [2] The RV-10 was designed from the start as a touring aircraft and as such it forgoes the aerobatic capabilities and the lighter handling common to the aircraft in the RV line from the RV-3 to RV-8. Instead the RV-10 design focuses on greater stability and payload. [4]

The design power is 210 to 260 hp (160 to 190 kW) and the prototype was flown with a Lycoming IO-540 powerplant of 260 hp (190 kW), which is the maximum that the airframe was designed to accept. [5] When Van's introduced the RV-10 they planned three engine configurations. One configuration using a smaller lighter 210 HP Continental IO-360ES, and two others using the larger 235 and 260 hp (180 and 190 kW) Lycoming I/O-540. The #1 factory demonstrator used the IO-540, while the #2 RV-10 used the Continental IO-360. Vans decided to discontinue the support for the Continental engine after a poll indicated that most builders would install the Lycoming engine, [6] although this poses problems for builders in certain countries with engine displacement limitations, in which the Continental's 360 cu in (5.9 L) displacement would be acceptable. [7]

This is the first aircraft in the RV line that does not have a hinged or sliding canopy. VanGrunsven instead opted for two gull-winged doors to provide access to the four seats.

This design has benefited from many of the production changes that were pioneered with the RV-7, RV-8 and the RV-9. Like those aircraft, the RV-10 uses computer assisted design to produce a kit with pre-drilled rivet holes, thus greatly reducing assembly time for the builder. The RV-10 is available only as a tricycle landing gear version and no tailwheel or retractable landing gear versions are planned.

The aircraft is constructed of aluminum with the cabin structure and gull-winged doors made from composite materials. The landing gear is tubular steel with the nosewheel mounting tube welded to the engine mount. As in all nose-wheel equipped RV aircraft, the nosewheel is free castering and the aircraft is steered with differential braking. The brakes are mounted conventionally on the rudder pedal toes.

The amount of time and effort required to build the airplane can vary greatly, but Vans claims that the average first-time builder can complete it in 2,000 hours. [5]

In February 2019 BRS Aerospace released a kit to install a ballistic parachute on the RV-10. The kit can be installed on a completed RV-10 or one under construction. The parachute takes up one third of the aircraft's baggage bay and weighs 82 lb (37 kg). [8]

Variants

Aircraft Turbine Solution Group PBS TP-100 RV-10
The RV-10 was selected as the testbed aircraft for the Diemech TP 100 241 hp (180 kW) turboprop engine, which first flew on 8 June 2014. [9] The testbed aircraft was outfitted with 120 gallon fuel tanks and was to be tested at altitudes of up to 20,000 ft (6,096 m). [10] [11]

Specifications (RV-10)

The RV-10 from the front, showing the gull-winged doors for cabin entry VansRV-10N104CD04.jpg
The RV-10 from the front, showing the gull-winged doors for cabin entry

Data from Manufacturer [12]

General characteristics

Performance

See also

Related development

Aircraft of comparable role, configuration, and era

Related Research Articles

<span class="mw-page-title-main">Barrows Bearhawk</span> American homebuilt aircraft

The Bearhawk, now also called the Bearhawk Four, is an American amateur-built aircraft, designed by Bob Barrows and produced by Bearhawk Aircraft of Fairview, OKlahoma. The aircraft is supplied as a kit or as plans for amateur construction.

<span class="mw-page-title-main">Thorp T-18</span> American homebuilt aircraft

The Thorp T-18 is an American, two-place, all-metal, plans-built, homebuilt aircraft designed in 1963 by John Thorp.

<span class="mw-page-title-main">Van's Aircraft RV-4</span> American kit aircraft

The Van's RV-4 is an American light homebuilt aircraft supplied in kit form by Van's Aircraft of Aurora, Oregon. It seats two people in a tandem seating configuration with the pilot accommodated in the front seat.

<span class="mw-page-title-main">Lancair IV</span> American homebuilt aircraft

The Lancair IV and IV-P are a family of four-seat, low-wing, retractable-gear, composite monoplanes powered by a 550-cubic-inch (9,000 cm3) Continental TSIO-550 twin-turbocharged piston engine.

<span class="mw-page-title-main">Velocity XL</span> American amateur-built aircraft

The Velocity XL is an American amateur-built aircraft, produced by Velocity, Inc. It is an enlarged version of their Velocity SE canard pusher design.

<span class="mw-page-title-main">Van's Aircraft RV-6</span> American kit aircraft

The Van's RV-6 and RV-6A are two-seat, single-engine, low-wing homebuilt airplanes sold in kit form by Van's Aircraft. The RV-6 is the tail-wheel equipped version while the RV-6A features a nose-wheel. The RV-6 was the first aircraft in the popular Van's RV series to feature side-by-side seating and the first to offer a nosewheel option. It was first flown in 1985. Over 2700 kits have been completed and flown.

<span class="mw-page-title-main">Van's Aircraft RV-7</span> American kit aircraft

The Van's RV-7 and RV-7A are two-seat, single-engine, low-wing homebuilt airplanes sold in kit form by Van's Aircraft. The RV-7 is the tail-wheel equipped version, while the RV-7A features a nose-wheel.

<span class="mw-page-title-main">Van's Aircraft RV-8</span> American kit aircraft

The Van's RV-8 is a tandem two-seat, single-engine, low-wing homebuilt aircraft sold in kit form by Van's Aircraft. The RV-8 is equipped with conventional landing gear, while the RV-8A version features tricycle landing gear. The design is similar to the earlier RV-4, although it is larger than that earlier model.

<span class="mw-page-title-main">Van's Aircraft RV-9</span> American kit aircraft

The Van's RV-9 and RV-9A are American two-seat, single-engine, low-wing homebuilt airplanes sold in kit form by Van's Aircraft of Aurora, Oregon. The RV-9 is the tail-wheel equipped version while the RV-9A features a nose-wheel.

<span class="mw-page-title-main">Van's Aircraft RV-3</span> American kit aircraft

The Van's RV-3 is a single-seat, single-engine, low-wing kit aircraft sold by Van's Aircraft. Unlike many other aircraft in the RV line, the RV-3 is only available as a tail-wheel equipped aircraft, although it is possible that some may have been completed by builders as nose-wheel versions. The RV-3 is the genesis design for the rest of the RV series, all which strongly resemble the RV-3. The RV-4 was originally developed as a two-seat RV-3.

<span class="mw-page-title-main">Lancair ES</span> American light aircraft

The Lancair ES is an American amateur-built aircraft that was designed and produced by Lancair. While it was in production the aircraft was supplied as a kit for amateur construction.

The Rans S-16 Shekari is an American single-engined, two-seat, low-wing, experimental amateur built aerobatic monoplane designed by Randy Schlitter, and produced by Rans Inc of Hays, Kansas, and sold as a kit for amateur construction.

The Jurca MJ-51 Sperocco is a plans-built two-seat tandem aerobatic aircraft derived from the Jurca MJ-5 Sirocco.

<span class="mw-page-title-main">Glasair Sportsman 2+2</span> American kit airplane

The Glasair Sportsman 2+2 is a single-engine, high wing, strut-braced, four seat kit aircraft, developed by the Glasair Aviation company.

<span class="mw-page-title-main">Team Rocket F1 Rocket</span> Type of aircraft

The Team Rocket F1 Rocket is a two-seat sport plane formerly built in Czech Republic and marketed as a kit for amateur construction by Team Rocket of Texas, United States. As of April 2017, the aircraft is being produced in the U.S. under license from Team Rocket by Frazier Aviation Products LLC of Indiana.

<span class="mw-page-title-main">Van's Aircraft RV-14</span> American homebuilt airplane

The Van's Aircraft RV-14 is an American aerobatic kit aircraft designed by Richard VanGrunsven and produced by Van's Aircraft. It was introduced at AirVenture in July 2012. The aircraft is supplied as a kit for amateur construction.

The Raven 2XS is a Canadian aerobatic amateur-built biplane, designed and produced by Raven Aircraft of Surrey, British Columbia. The aircraft is supplied as a kit or as plans for amateur construction.

<span class="mw-page-title-main">Ravin 500</span> South African homebuilt aircraft

The Ravin 500 is a South African amateur-built aircraft, designed and produced by Ravin Aircraft of Pretoria. The aircraft first flew on 15 September 2002 and is supplied as a kit for amateur construction or as a complete ready-to-fly aircraft.

The ARV Griffin is a Canadian homebuilt aircraft that was designed by Dave Marsden of the University of Alberta and produced by Canada Air RV and later by AC Millennium Corp, both of Edmonton. When it was available the aircraft was supplied as a kit for amateur construction.

<span class="mw-page-title-main">SkyDancer SD-260</span> American homebuilt aircraft

The SkyDancer SD-260 was an American aerobatic homebuilt biplane that was designed and produced by SkyDancer Aviation of Louisville, Kentucky, introduced in the mid-1990s. When it was available the aircraft was supplied as a kit.

References

  1. 1 2 Vans Aircraft (November 2022). "First Flights" . Retrieved November 23, 2021.
  2. 1 2 Vans Aircraft (April 2019). "Van's RV-10" . Retrieved April 13, 2019.
  3. ↑ Vandermeullen, Richard: 2011 Kit Aircraft Buyer's Guide, Kitplanes, Volume 28, Number 12, December 2011, page 74. Belvoir Publications. ISSN   0891-1851
  4. ↑ Bayerl, Robby; Martin Berkemeier; et al: World Directory of Leisure Aviation 2011–12, page 124. WDLA UK, Lancaster UK, 2011. ISSN   1368-485X
  5. 1 2 Kitplanes Staff: 2008 Kit Aircraft Directory, page 78, Kitplanes Magazine December 2007 Volume 24, Number 12, Belvoir Publications, Aviation Publishing Group LLC.
  6. ↑ 2005 #1 Issue of the RVator
  7. ↑ http://www.fomento.gob.es/NR/rdonlyres/1AC8F7F7-4133-4A0D-B4D2-9E2DFF400334/111570/3161982.pdf [ dead link ]
  8. ↑ Cook, Marc (February 19, 2019). "BRS Releases Parachute For Van's RV-10". AVweb. Retrieved February 20, 2019.
  9. ↑ "The RV-10 aircraft completed its first flight" (Press release). PBS Velká Bíteš. June 2014. Retrieved August 26, 2016.
  10. ↑ Bertorelli, Paul (March 26, 2012). "Is There Room For A 240-HP Turbine?". AVweb. Retrieved March 27, 2012.
  11. ↑ "Turboprop solution". AOPA Pilot: 38. June 2014.
  12. ↑ Van's Aircraft. "RV-12". vansaircraft.com. Archived from the original on April 2, 2020. Retrieved May 8, 2020.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.